The aim of this in vitro study is to compare the color stability and surface roughness of conventional and self-blending resin composites before and after staining and aging. Three conventional composites (Filtek Z350, IPS Empress Direct, and Estalite Palfique LX5) and one self-blending (Omnichroma) resin composite were used in this study. Sixty discs were prepared and polymerized in a metal mold (n = 15 per group). Samples were then finished and polished by Layan discs. Color testing and roughness testing were measured as a baseline (T0) by a spectrophotometer and profilometry. Samples were then stained with tea for 24 h, water aged for 30 days, and then a second reading (T1) was performed. Finishing and polishing were performed again, and a third reading (T2) was collected. All groups showed significant decrease in all color parameters (L*, a*, and b*); however, after polishing, all groups showed color enhancements matching pre-experiment baseline colors in all color parameters (L*, a*, and b*), except for Estelite Palfique LX5, which showed a significant difference in L relative to the baseline. Furthermore, Estalite Palfique LX5 showed increased roughness after staining compared to the baseline, unlike other groups. No significant differences in color stability were found between self-blending composites and other composite materials. Accelerated aging and staining had minimal effects on the surface roughness of self-blending composite.

Contamination of zirconia restorations before cementation can impair the resin–zirconia bonding durability. The objective of this study was to evaluate the effect of human saliva or blood decontamination with 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing cleaner on the resin–zirconia shear bond strength (SBS). Methods: A total of 220 zirconia specimens were prepared and air-abraded and randomly distributed into 11 groups (n = 20 per group). Except for the control group (no contamination), zirconia specimens were contaminated with either human saliva (five groups) or blood (five groups), and then subjected to one of five cleaning methods: water rinsing, 38% phosphoric acid etchant (Pulpdent Corp., Watertown, MA, USA), 70% isopropanol alcohol (Avalon Pharma, Riyadh, Saudi Arabia), Ivoclean (Ivoclar Vivadent, Schaan, Lichtenstein) and Katana Cleaner (Kuraray Noritake, Tokyo, Japan). The resin–zirconia SBS was tested at 24 h and after thermocycling (10 k cycles). Three-way ANOVA followed by Tukey’s multiple comparisons test were utilized to analyze the SBS data. Failure modes were evaluated using a scanning electron microscope. Results: Both blood and saliva significantly affected resin–zirconia SBS as contaminants. After thermocycling, there was no statistically significant difference between SBS obtained after decontamination with the Katana Cleaner (blood, 6.026 ± 2.805 MPa; saliva, 5.206 ± 2.212 MPa) or Ivoclean (blood, 7.08 ± 3.309 MPa; saliva, 6.297 ± 3.083 MPa), and the control group (no contamination, 7.479 ± 3.64 MPa). Adhesive and mixed failures were the most frequent among the tested groups. Conclusion: Both 10-MDP-containing cleaner (Katana Cleaner) and zirconium oxide-containing cleaner (Ivoclean) could eliminate the negative effect of saliva and blood contamination on resin–zirconia SBS.

Background: Caries risk assessment is a useful tool in caries prevention and management. Using a tool such as CAMBRA, every individual can be assessed according to his or her disease indicators, risk factors, and protective factors for the current and future caries. Aim: This study aimed to assess caries risk among the general population of Sakaka, Saudi Arabia using the CAMBRA protocol. Methods: This cross-sectional study was conducted at university dental clinics using a questionnaire that was formulated using the CAMBRA caries risk assessment tool; afterwards, all 160 participants were intra-orally examined to assess oral hygiene status and presence of disease. Independent t-tests, ANOVAs, and chi-square tests were performed for analysis. Results: The majority of participants had one or more disease indicators, with white spots and visible cavities (71.3%), and the most commonly present risk factor was visible heavy plaque on teeth (82.5%). The use of fluoridated toothpaste (92.5%) was the most common protective factor. The majority of participants (85%) were in the ‘High’ category of Caries risk assessment. The prevalence of high caries risk was significantly higher among the rural participants compared to the urban (p <0.05), and significantly fewer of those with a primary school education level or lower were in the high dental caries risk group compared to the other educational categories (p <0.001). Conclusion: The caries risk among the general population of Sakaka, Saudi Arabia, is high, with significant variation among age groups, education levels, and geographical locations.

Objective: The objective of this review was to evaluate the effect of non-thermal atmospheric plasma (NTAP) on adhesives resin–dentin micro-tensile bond strength (μTBS) in previously published studies. Methods: Electronic search was conducted using the Medline, Cochrane library, and Scopus databases. The included studies were laboratory studies that investigated the effect of NTAP on adhesives μTBS to coronal dentin. Studies that evaluated the effect of NTAP on bond strength to indirect substrates, enamel or root dentin, were excluded. The methodological quality of included studies was assessed. Results: Thirteen studies were included in this systematic review. All the included studies were considered to have a medium risk of bias. NTAP significantly improved μTBS at 24 h or after short-term aging in five studies (38.5%) and both immediate and after long-term aging in 5 studies (38.5%). In two studies (15.4%), NTAP resulted in a short-term material-dependent effect that was not stable after long-term aging. Interestingly, in one study (7.7%), NTAP had a positive effect only in the etch-and-rinse (ER) mode after long-term aging. Conclusion: Within the limitations of this systematic review, NTAP application could enhance resin–dentin μTBS of ER adhesives or universal adhesives (UAs) applied in the ER mode. In the ER mode, the rewetting step after NTAP seems to be unnecessary. Because of the limited information currently available in the literature, further studies are required to evaluate the effect of the NTAP application on self-etch (SE) adhesives or UAs applied in the SE mode.

Background: It is essential for practicing dentists to have adequate knowledge of HIV/AIDS and its implications in the dental practice. Their attitudes should also be up to the professional expectations. This study aimed to assess knowledge of HIV/AIDS infection and attitudes towards its patients among dental students in Saudi Arabia. Methods: A questionnaire was prepared and distributed among a sample of dental students in Saudi Arabia. Twenty questions related to knowledge, attitudes, and oral manifestation of HIV were presented. Results: A total of 405 questionnaires were completed (67% response rate). Participants showed low knowledge of safety regarding HIV (39.5%) and 44.2% indicated that they would take an HIV test after needle stick injury. The proportion of correct answers regarding transmission of HIV through saliva, cardiopulmonary resuscitation, and aerosols by hand pieces was 41%, 37.5%, and 26.4%, respectively. Almost 50% of the surveyed dental students expressed unwillingness to treat HIV-positive patients. Poor knowledge was noted regarding oral manifestations of HIV (32.7%). Of the participants, 57.8% indicated that infection control procedures are very important for the treatment of HIV patients and 50.6% believed that a dentist can make a decision to reject the treatment of HIV patients. According to the participating dental students, the three major oral manifestations in HIV patients are hairy leukoplakia (47.4%), oral candidiasis (44.7%), and Kaposi’s sarcoma (43.5%). Conclusion: Inadequate knowledge and unprofessional attitude towards HIV/AIDS patients were identified among this group of dental students in Saudi Arabia. Dental educators and health care planners in Saudi Arabia should plan to promote the knowledge and attitudes of dental students in Saudi Arabia towards the treatment of HIV patients.

In recent years, laminate veneer restorations should be considered as a minimally invasive treatment option for several aesthetic reasons. This study compared direct composite veneers’ and indirect ceramic laminate veneers’ longevity in multiple diastema closures. A total of 28 patients with a mean age of 26 years received 60 direct resin composite (Estelite Asteria; n = 14) and 60 indirect ceramic veneers (IPS e.max Press; n = 14) on the maxillary anterior teeth with diastema closure. Veneers were evaluated at baseline and thereafter every 6 months for up to 2 years using USPHS criteria. Data were analyzed with Fisher’s exact and chi-squared tests, while Kaplan–Meier curve was used to assess time to event. In total, three failures were observed in the form of debonding (n = 1) and fracture (n = 2) in the indirect ceramic veneers. No significant difference was observed between the survival rates of composite and ceramic veneers (Estelite Asteria: 93.4%, IPS e.max Press: 95%; p > 0.05). The overall survival rate was 94.2% (Kaplan–Meier). Staining (n = 11) and roughness (n = 14) were frequently observed for the resin composite veneers up to the final recall. Thereby, the preliminary results from this clinical trial comparing two veneer materials indicated that their survival rates were statistically similar. However, surface quality changes were more frequent in the composite veneer material.