Gilberto Vaz

Dr. Gilberto Vaz

Polytechnic Institute of Coimbra, Coimbra, Portugal
orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2018 in Renewable and Sustainable Energy Reviews
Verified
Journal Article
Closed access
JPJoão S. Pereira
João S. Pereira
JRJosé M. B. Ribeiro
José M. B. Ribeiro
Ricardo MendesRicardo Mendes
Ricardo Mendes
GVGilberto Vaz
Gilberto Vaz
JAJorge C. André
Jorge C. André

1 October 2015 in Energy Conversion and Management
Verified
Journal Article
Closed access
ACAnabela D. Carvalho
Anabela D. Carvalho
Pedro MouraPedro Moura
Pedro Moura
GVGilberto Vaz
Gilberto Vaz
Anibal T. de AlmeidaAnibal T. de Almeida
Anibal T. de Almeida

25 June 2008 in Steel and Composite Structures
Verified
Journal Article
Closed access
Aldina SantiagoAldina Santiago
Aldina Santiago
LSLuis Simoes da Silva
Luis Simoes da Silva
GVGilberto Vaz
Gilberto Vaz
PRPaulo Vila Real
Paulo Vila Real
ALAntonio Manuel Gameiro Lopes
Antonio Manuel Gameiro Lopes

8 April 2004 in International Journal of Wildland Fire
Verified
Journal Article
Closed access
PDF file
GVGilberto Vaz
Gilberto Vaz
JAJorge C. André
Jorge C. André
Domingos Xavier ViegasDomingos Xavier Viegas
Domingos Xavier Viegas
. The standard formula used to estimate the radiation extinction coefficient, kb (m–1), of solid porous natural fuel beds is examined and tested against laboratory experiments with isotropic beds of pine needles in the range of packing ratio, β, of 0.01–0.02. To measure kb in the tests, a setup using a parallel beam of white light radiation was constructed. The error of the standard formula is observed to be smaller than 10%. Similar tests were performed for a non-isotropic bed of pine needles with β ≈ 0.02, in which the maximum angle of inclination of the needles was limited to 30°, for two directions of incidence of radiation: horizontal and vertical. For each one of these two cases, original estimation formulae for kb are proposed alternative to the standard one. In these cases it is concluded that, while the standard formula may be in error by up to 20%, the new formulae have errors around 5% or smaller.

1 February 2004 in Combustion Science and Technology
Verified
Journal Article
Closed access
GVGilberto Vaz
Gilberto Vaz
JAJ. C. S. André
J. C. S. André
Domingos Xavier ViegasDomingos Xavier Viegas
Domingos Xavier Viegas
A semi-empirical model for a steady linear fire front propagating through a statistically homogeneous porous bed, for the basic case of no wind, no slope, and fine fuel particles, is presented. The model structure is modular, based on an open library of submodels for the relevant phenomena. The submodeling of moisture heat absorption and radiation is addressed in detail. Presently, the model is not closed; it requires two properties of the fire front as inputs. Various sensitivity analyses and parametrical studies are performed. A laboratory test in a bed of pine needles showed that the model predictions are very sensitive to the flame height estimation and that the empirical submodels available in the literature are not adequate. However, if the flame height is considered an input, the rate of spread and the profile of the leading edge of the front in the fuel bed are predicted within the experimental errors.

25 December 2005 in Steel and Composite Structures
Verified
Journal Article
Closed access
ALAntonio Manuel Gameiro Lopes
Antonio Manuel Gameiro Lopes
GVGilberto Vaz
Gilberto Vaz
Aldina SantiagoAldina Santiago
Aldina Santiago