Major efforts are currently being made in the research community to address the challenges of greenhouse gas emissions from fossil fuel combustion by using lignocellulosic biomass, agricultural waste, and forest residues as cleaner energy sources. However, its poor qualities, such as low energy density, high moisture content, irregular shape and size, and heterogeneity, make it impossible to utilize in its natural state. Torrefaction, a simple heat treatment method, is used frequently with natural bioresources to improve their thermal characteristics so that they may be used as energy sources in domestic power plants. The quality of the resulting torrefied solids (biochar) is determined by the heat condition settings in the absence of oxygen, and it may be enhanced by carefully selecting and altering the processing parameters. The comprehensive overview presented here should serve as a useful toolkit for farmers, combined heat and power plants, pulp and paper installations, and other industrial plants that use biomass as a substrate for biofuel production. This research focuses on torrefaction product properties, reaction mechanisms, a variety of technologies, and torrefaction reactors. It is impossible to determine which torrefaction technology is superior as each reactor has unique properties. However, some suggestions and recommendations regarding the use of torrefaction reactors are given.

The depletion of fossil fuels has led to a search for new methods of fuel and chemical production from biomass. One of the methods of converting biomass into valuable products is the process of pyrolysis. This process has been extensively researched in recent years due to the rising prices of energy and chemicals. This work contains basic information on the pyrolysis process concerning the individual components present in the biomass and the types of biomass used in the pyrolysis process. Particular attention was paid to sewage sludge, the management of which is a big challenge. The influence of the most important process parameters (temperature, heating rate, residence time of the solid and vapor, reaction atmosphere) on the pyrolysis products (char, oil, and gas) was presented. The paper presents an overview of the reactors used in the pyrolysis process, from slow to fast pyrolysis, together with their efficiency, advantages, and disadvantages. The analysis of the application of other thermochemical processes for producing the energy used in the process of pyrolysis and in the drying of the biomass was carried out. Two industrial-scale installations for the pyrolysis of sewage sludge were presented.

This work presents the results of research on the thermo-chemical conversion of woody biomass–pine wood coming from lodzkie voivodship forests and sewage sludge from the Group Sewage Treatment Plant of the Łódź Urban Agglomeration. Laboratory scale analyses of the carbonization process were carried out, initially using the TGA technique (to assess activation energy (EA)), followed by a flow reactor operating at temperature levels of 280–525 °C. Both the parameters of carbonized solid biofuel and biochar as a carrier for fertilizer (proximate and ultimate analysis) and the quality of the torgas (VOC) were analyzed. Analysis of the pine wood and sewage sludge torrefaction process shows clearly that the optimum process temperature would be around 325–350 °C from a mass loss ratio and economical perspective. This paper shows clearly that woody biomass, such as pine wood and sewage sludge, is a very interesting material both for biofuel production and in further processing for biochar production, used not only as an energy carrier but also as a new type of carbon source in fertilizer mixtures.

One of the solid waste produced during the combustion of coal are fly ashes. Disposal challenges and environmental consequences are the results of significant process yield and atmospheric emission of fly ashes. The exact chemical composition of FA depends mainly on the type of utilised fuel and combustion conditions. It consists mainly of chemically stable metal oxides, such as Al₂O₃, Fe₂O₃, SiO₂, CaO, MgO, K₂O, Na₂O and TiO₂, but its toxicity is related to the possible presence of some trace elements, such as As, Hg, Cd, Se and Cr. The chemical and physical properties of fly ash (e.g., particle size distribution, porosity, and surface area) make it suitable as an adsorbent to remove various impurities from process flows such as flue gas stream. Its suitability for capturing mercury from flue gas was experimentally confirmed due to its abundant supply, particle size, bulk density, porosity, chemical composition and low cost. Hence, the use of fly ash as adsorbents and precursors for the production of heavy metal adsorbents is of great practical importance, as it reduces the cost of mercury capture and alleviates the problems associated with the disposal of solid waste. Studies showed that the chemical components present in fly ash additives could stimulate catalytic oxidative capacity, which increases the adsorption of Hg⁰ oxidation and adsorption of both Hg and CO₂. The presented study analysed fly ashes from different zones of the electrostatic precipitator and verified their suitability for removing impurities from flue gases, i.e., mercury and carbon dioxide. The results outlined modified fly ash as having good Hg and CO₂ removal capabilities. The adsorption efficiency of Hg reached 92% for Hg and 66% for CO₂, while untreated fly ash reached 67% for Hg and 59% for CO₂.