Longitudinal ventilation and smoke extraction by shaft are common smoke control methods in road tunnel fires. Tunnels often adopt one of these methods in practical engineering. However, it may have a better effect to adopt the method of mixing the two smoke exhaust methods together, which has not been revealed in the previous literature. Hence, the coupled effects of longitudinal ventilation and natural ventilation with shafts on the smoke control in tunnel fires were studied in this work. Numerical simulation was carried out considering different longitudinal ventilation velocities (0–4 m/s) and 4 kinds of typical shaft arrangements (shaft lengths range of 3–12 m, shaft intervals range of 27–60 m). The smoke spread length and smoke exhaust efficiency were analyzed systematically. Results show that (1) with the increase in longitudinal ventilation velocity, the total smoke spread length firstly decreases (V < 1 m/s) and then keeps almost constant (1 m/s < V < 2 m/s), finally increasing significantly (V > 2 m/s). (2) The length of the dangerous area (over 60 °C) at human height is basically 0 for all cases (except for Scenario 4 of shaft arrangement) when the longitudinal ventilation velocity is less than 2 m/s. (3) The CO smoke flow rate through the shaft is relatively high when the longitudinal ventilation velocity is within the range of 1–2 m/s for 4 kinds of shaft arrangement scenarios. Factors such as smoke spread and smoke exhausted through the shaft are comprehensively considered to judge smoke exhaust performance. The following conclusions can be drawn: when the ventilation velocity ranges from 1–2 m/s, it has a positive impact on the smoke control in tunnel fires with natural ventilation with shafts. When the ventilation velocity exceeds 2 m/s, the total smoke spread length and the length of the danger area increase, and the smoke stratification becomes worse, which brings inconvenience to rescue work. The results can provide reference for the design of fire protection in tunnels.

This paper studied the effects of ambient pressure on the plug-holing phenomenon in tunnel fires with a shaft by a Fire Dynamics Simulator. The influence of ambient pressures on the smoke movement, temperature distribution, critical Richard number (Ri_c) and critical shaft height for plug-holing were analyzed in detail. A new prediction formula of smoke flow velocity considering different pressures was modified. A prediction formula of smoke temperature distribution beneath the ceiling under different pressures was developed. As a result, a prediction model of Richard numbers to determine whether the plug-holing occurs was proposed by combining smoke flow velocity and smoke temperature distribution. The critical Richard numbers (Ri_c) and critical shaft height (h_c) increases as the pressure decreases. Outcomes in this study can provide references for the design of a natural ventilation system in tunnel fires at a higher altitude.

During the global energy transition, electric vehicles and electrochemical energy storage systems are rapidly gaining popularity, leading to a strong demand for lithium battery technology with high energy density and long lifespan. This technological advancement, however, hinges critically on resolving safety challenges posed by intrinsically reactive components particularly flammable polymeric separators, organic electrolyte systems, and high-capacity electrodes, which collectively elevate risks of thermal runaway (TR) under operational conditions. The strategic integration of smart polymeric materials that enable early detection of TR precursors (e.g., gas evolution, thermal spikes, voltage anomalies) and autonomously interrupt TR propagation chains has emerged as a vital paradigm for next-generation battery safety engineering. This paper begins with the development characteristics of thermal runaway in lithium batteries and analyzes recent breakthroughs in polymer-centric component design, multi-parameter sensing polymers, and TR propagation barriers. The discussion extends to intelligent material systems for emerging battery chemistries (e.g., solid-state, lithium-metal) and extreme operational environments, proposing design frameworks that leverage polymer multifunctionality for hierarchical safety mechanisms. These insights establish foundational principles for developing polymer-integrated lithium batteries that harmonize high energy density with intrinsic safety, addressing critical needs in sustainable energy infrastructure.