Non-destructive monitoring methods and continuous monitoring systems based on them are crucial elements of modern systems for the management and maintenance of assets which include reinforced concrete structures. The purpose of our study was to summarise the data on the most common sensors and systems for the non-destructive monitoring of reinforced concrete structures developed over the past 20 years. We considered systems based on electrochemical (potentiometry, methods related to polarisation) and physical (electromagnetic and ultrasonic waves, piezoelectric effect, thermography) examination methods. Special focus is devoted to the existing sensors and the results obtained using these sensors, as well as the advantages and disadvantages of their setups or other equipment used. The review considers earlier approaches and available commercial products, as well as relatively new sensors which are currently being tested.

The marine environment is highly corrosive for mild and low alloy steels. This study aimed to enhance the corrosion resistance of the AH36 steel in a saline medium by coating it with a copper particles reinforced polyaniline (PANI) layer. PANI and Cu particles were grown on the steel surface by electrodepositing methods. Firstly, PANI was electropolymerized in the presence of oxalic acid, followed by the electrodeposition of Cu particles at different deposition times. The coating showed a well-distribution of Cu particles in the polymer matrix and excellent adhesion. Furthermore, the Cu particles and PANI-coated steels exhibited corrosion resistance significantly in the saline medium compared to the bare substrate and pristine PANI-coated samples. The improved corrosion protection of a Cu@PANI coating on the AH36 steel could contribute to forming a physical barrier by filling Cu particles on the PANI pores.

A calcareous deposit is a by-product of the cathodic polarization in seawater environments. This study presents the results of evaluating the anticorrosion and anti-macro-biofouling effectiveness of a calcareous deposit layer on the surface of the cathodically polarized AH36 structural steel in tropical seawater. The polarization is induced with initial current densities at which the calcareous deposit layer formed with both aragonite and brucite for 12 months continuously. The protective properties of the layer were compared with those of the passive layer from corrosion products under the same environmental conditions. The macro-biofouling in the tropical seawater is observed in the closed and open surfaces of the steel. The comparison of the anticorrosion property shows that, to some degree, the calcareous deposit layer contributes to surface passivation, as in the case of the corrosion product layer. In addition, the composition of the brucite and aragonite in the calcareous layer in the study plays a role as a macro-biofouling growth-limiting factor.

Objects and structures made of organic glass require protection from damage caused by external factors. Light, humidity, temperature, dust pollution and, undoubtedly, microorganisms lead to the deterioration of optical and mechanical properties. Polysiloxane-based protective coatings, consisting of silicon–oxygen backbones linked together with organic side groups attached to the silicon atoms, are widely used. However, the polysiloxane coatings themselves also cannot avoid deterioration during operation that implies the constant development of new protective materials. Here, we created a new cross-linked polysiloxane that covers organic glasses to enhance their resistance to aggressive external factors, and investigated its own resistance to damage induced by micromycetes in natural tropical conditions and in the laboratory. It has been established that the surface of coatings in the tropics is prone to fouling with micromycetes, mainly of the genera Aspergillus and Penicillium, which produce oxalic, malic, lactic, and citric acids contributing to the biodeterioration of polysiloxane. The testing of monolithic polycarbonate, polymethyl methacrylate, and triplex coated with polysiloxane showed that they retained significant resistance to abrasion and transparency at a level of more than 90% under aggressive natural conditions. Under artificial laboratory conditions, the infection of samples with micromycete spores also revealed their growth on surfaces and a similar trend of damage.