Daniel Franz

Mr. Daniel Franz

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
DFDaniel Franz
Daniel Franz
THTom Häfner
Tom Häfner
TKTim Kunz
Tim Kunz
GRGian-Luca Roth
Gian-Luca Roth
SRStefan Rung
Stefan Rung
Ralf HellmannRalf Hellmann
Ralf Hellmann
We report on a comprehensive study of laser percussion microvia drilling of FR-4 printed circuit board material using ultrashort pulse lasers with emission in the green spectral region. Laser pulse durations in the pico- and femtosecond regime, laser pulse repetition rates up to 400 kHz and laser fluences up to 11.5 J/cm2 are applied to optimize the quality of microvias, as being evaluated by the generated taper, the extension of glass fiber protrusions and damage of inner lying copper layers using materialography. The results are discussed in terms of the ablation threshold for FR-4 and copper, heat accumulation and pulse shielding effects as a result of pulse to pulse interactions. As a specific result, using a laser pulse duration of 2 ps appears beneficial, resulting in small glass fiber protrusions and high precision in the stopping process at inner copper layer. If laser pulse repetition rates larger than 100 kHz are applied, we find that the processing quality can be increased by heat accumulation effects.

25 February 2022 in Applied Physics B
Verified
Journal Article
Open access
PDF file
DFDaniel Franz
Daniel Franz
THTom Häfner
Tom Häfner
TKTim Kunz
Tim Kunz
GRGian-Luca Roth
Gian-Luca Roth
SRStefan Rung
Stefan Rung
RHRalf Hellmann
Ralf Hellmann
We report on the characterization of a hybrid laser scanning system using acousto-optical deflectors in combination with galvanometer scanners for ultra-short pulse laser material processing. The hybrid scanning system is characterized by the roundness of static pulsed ablations of metal thin film on a transparent substrate within the acousto-optical scanning field at different galvanometer scanner deflection angles and laser focal positions. An ablation roundness of more than 90% is reached in a defocusing range of 200 $$\upmu \text{m}$$ μ m within a galvanometer scanfield of 900 $$\text{mm}^2$$ mm 2 , corresponding to approximately 74% of the usable scan area of the f-theta lens. A high maximum positioning speed of 843 m/s is pointed out within an acousto-optical scanfield of 0.4 $$\text{mm}^{2}$$ mm 2 by applying positioning frequencies of up to 1 MHz across a distance of 843 $$\upmu \text{m}$$ μ m . Consequently, the hybrid scanning system combines the advantages of optical and mirror-based scanners, enabling a highly dynamic and extremely precise laser beam positioning in a large processing area.

28 May 2025 in Optics and Lasers in Engineering
Verified
Journal Article
Open access
DFDaniel Franz
Daniel Franz
DSDavid Schuster
David Schuster
SSSimon Schwarz
Simon Schwarz
SRStefan Rung
Stefan Rung
CECemal Esen
Cemal Esen
Ralf HellmannRalf Hellmann
Ralf Hellmann

1 September 2023 in Materials Research Express
Verified
Journal Article
Open access
DFDaniel Franz
Daniel Franz
THTom Häfner
Tom Häfner
KBKay Bischoff
Kay Bischoff
JHJonas Helm
Jonas Helm
TKTim Kunz
Tim Kunz
RHRalf Hellmann
Ralf Hellmann
We report on a comprehensive study of laser percussion microvia drilling of Ajinomoto build-up film (ABF) material using an ultrashort pulsed laser in MHz burst mode. After laser processing, microvia drilling quality is being evaluated by the fabricated diameter and taper using laser scanning microscopy and metallography. The influences of the incubation effect, heat accumulation and shielding effects as a result of pulse to pulse interactions are being discussed on the ablation threshold, penetration depth and laser microvia drilling quality. We find that an increasing heat accumulation in MHz burst mode processing is responsible for the void formation and delamination of the insulating ABF layer. Therefore, the parameter clearance is introduced to evaluate these effects on the microvia sidewalls. For a comparable clearance, applying 2 intra-burst pulses achieves an average reduced taper of down to 19.5% compared to single pulse mode. At the same time, a reduced laser drilling time of 16.7% per microvia highlights the enormous potential of the MHz burst mode for laser drilling of ABF material in printed circuit board fabrication.

30 October 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
DFDaniel Franz
Daniel Franz
YYYongting Yang
Yongting Yang
LMLuis Michel
Luis Michel
CECemal Esen
Cemal Esen
RHRalf Hellmann
Ralf Hellmann
We report for the first time on the realization, characterization and application of an ultrashort pulsed laser robot system for flexible and large-area 2D and 3D laser micromachining with 6 articulated axes. To characterize the dynamic positioning of the laser beam during and after axes movement, CMOS image sensors were integrated into the beam path. A method introduced for the alignment of the optical axes allows a reduction of the deviations in laser beam positioning to less than 141.8 ± 92.9 μm within a 110° rotation range of axis 4. In addition, a high laser beam positioning repeatability of less than 102.2 μm is demonstrated over a total period of 14 h for a movement of axis 5 within a range of 0° to 90°. Initial laser cutting, laser structuring and laser marking applications on automotive dashboards and glass substrates are presented for flexible and large area 2D and 3D manufacturing. By applying a special laser cutting strategy for processing AF 32 eco thin glass, high cutting quality is achieved with a taper of up to 96.3% without the generation of cracks, demonstrating the innovative potential of the high-precision laser robot system. Nonetheless, different identified inherent influences of each axis 1–5 during robot axis movement demand for an innovative beam stabilization concept to achieve high precision in laser beam positioning.

12 October 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
YYYongting Yang
Yongting Yang
DFDaniel Franz
Daniel Franz
CECemal Esen
Cemal Esen
RHRalf Hellmann
Ralf Hellmann
We demonstrate an innovative beam stabilization concept consisting of complementary metal-oxide semiconductor cameras and piezo actuators for a six-axis articulated ultrashort pulsed laser robot system. The beam stabilization system is fixed on robot axes 4 and 5. Moving robot axis 5 in an angular range between 0° and 90°, the laser beam position coupled to the actual robot position is monitored by two cameras integrated on robot axis 5 and used for laser beam characterization and model generation. A mathematical description and models generated with machine learning methods, namely, linear regression and neural network, are compared for predicting the beam position drift as a function of robot axis motion, where the neural network model shows a low prediction tolerance of about 7 pixels. In addition, a stand-alone time-triggered beam correction algorithm is developed and implemented on the system, which shows an excellent correction performance for large beam position drifts (below 500 pixels).