In order to examine the seismic behavior of high-strength steel extended end-plate connections, a three-dimensional efficient finite-element model in Abaqus was established subjected to cyclic loading at the beam end. Geometrical dimensions, boundary conditions, element types, contact properties between the bolts, end-plate and column flange, and material cyclic constitutive models were described in detail. Geometry and material nonlinearity were adequately considered. In particular, a cyclic plasticity model for high-strength steels was employed that was easily calibrated based on the tension coupon test, so as to describe the complicated cyclic hardening and softening response. The simulated results of the finite-element model were compared to the test ones in terms of both deformation modes and hysteresis loops. The results showed that the bending deformation of the end-plate and column flange was accurately captured, and the gap phenomena among the bolt nuts, the end-plate, and column flange was described in a satisfactory manner as well. The hysteresis loops from the simulation agreed well with the test results, reproducing the pinched shape due to the end-plate gap evolution under cyclic loading as well as the quite plump shape with stable energy dissipation when the panel zone dominated the cyclic response. Therefore, the accuracy of the finite-element model was verified and it provided a strong benchmark tool for investigating the cyclic or seismic performance of this kind of connection. The connection failure including the bolt fracture and cracking in the end-plate needs further numerical study by calibrating accurate material failure models for high-strength steels and bolts.
Steel frame with steel plate shear walls (SPSWs) is used to resist lateral loads caused by wind and earthquakes in high-rise buildings. In this load-resisting system, the cost and performance are more efficient than in the moment frame system. Behaviors of beam-to-column connections are assumed to be pinned or fixed to simplify the calculation in the past few decades. However, studies have stated that such a simulation fails to reveal the response of beam-to-column connections. In this paper, a newly developed metaheuristic optimization algorithm—the dolphin echolocation algorithm (DE)—based on foraging prey using echolocation in dolphins is applied as the present study optimizer. Two different two-dimensional semirigid connection steel frames with SPSWs are optimized to obtain the minimum cost of semirigid connection steel frame with steel plate shear walls with constraints to element stresses and story drift ratio according to the American Institute of Steel Construction (AISC) Load and Resistance Factor Design (LFRD). SPSW is modeled as a brace with equivalent lateral stiffness, while the effects are considered in the steel frame. Semirigid connections are used to reveal the actual responses of beam-to-column connections. The results demonstrate the proposed method’s effectiveness for optimizing semirigid connection steel frames with SPSWs and the interaction between semirigid connections and the SPSWs.