Rudi Kurniawan

Dr. Rudi Kurniawan

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
SRSamsul Rizal
Samsul Rizal
Tata AlfatahTata Alfatah
Tata Alfatah
Abdul Khalil H. P. S.Abdul Khalil H. P. S.
Abdul Khalil H. P. S.
Esam YahyaEsam Yahya
Esam Yahya
CAC.K. Abdullah
C.K. Abdullah
RBRahul Dev Bairwan
Rahul Dev Bairwan
The development of bioplastic materials that are biobased and/or degradable is commonly presented as an alleviating alternative, offering sustainable and eco-friendly properties over conventional petroleum-derived plastics. However, the hydrophobicity, water barrier, and antimicrobial properties of bioplastics have hindered their utilization in packaging applications. In this study, lignin nanoparticles (LNPs) with a purification process were used in different loadings as enhancements in a Kappaphycus alvarezii matrix to reduce the hydrophilic nature and improve antibacterial properties of the matrix and compared with unpurified LNPs. The influence of the incorporation of LNPs on functional properties of bioplastic films, such as morphology, surface roughness, structure, hydrophobicity, water barrier, antimicrobial, and biodegradability, was studied and found to be remarkably enhanced. Bioplastic film containing 5% purified LNPs showed the optimum enhancement in almost all of the ultimate performances. The enhancement is related to strong interfacial interaction between the LNPs and matrix, resulting in high compatibility of films. Bioplastic films could have additional advantages and provide breakthroughs in packaging materials for a wide range of applications.

10 January 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SRSamsul Rizal
Samsul Rizal
Abdul Khalil H. P. S.Abdul Khalil H. P. S.
Abdul Khalil H. P. S.
SHShazlina Abd Hamid
Shazlina Abd Hamid
IIIkramullah Ikramullah
Ikramullah Ikramullah
RKRudi Kurniawan
Rudi Kurniawan
Tata AlfatahTata Alfatah
Tata Alfatah
Plastic pollution has raised interest in biodegradable and sustainable plastic alternatives. For edible food packaging, seaweed biopolymers have been studied for their film-forming properties. In this study, packaging films were developed using the solvent casting technique from natural red seaweed (Kappaphycus alvarezii) and coffee waste product. The physico-chemical and thermal properties of seaweed/coffee biopolymer films was obtained using dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier transmission irradiation (FT-IR), water contact angle measurement (WCA) and thermogravimetric analysis (TGA). The characterization study was carried out to improve the film’s morphological, thermal, and mechanical properties. The average particle size of coffee waste was found to be between 1.106 and 1.281 µm, with a zeta potential value of −27.0 mV indicating the compound’s strong negative charge. The SEM analysis revealed that the coffee filler was evenly dispersed in the polymer matrix, improving the film’s structural properties. The FT-IR result shows that coffee waste was successfully incorporated over the film matrix with the presence of a N-H bond. The hydrophobic property of the film was enhanced with the incorporation of coffee filler, indicating increased water contact angle compared to the neat film. The tensile properties of the biopolymer film were significantly improved at 4 wt% coffee powder with optimum tensile strength (35.47 MPa) with the addition of coffee waste powder. The incorporation of coffee waste into the seaweed matrix increased the functional properties of the fabricated biopolymer film. Thus, seaweed/coffee biopolymer film has the potential to be used in food packaging and other applications.

1 January 2006 in Disaster Prevention and Management: An International Journal
Verified
Journal Article
Closed access
PDF file
HIHirokazu Iemura
Hirokazu Iemura
YTYoshikazu Takahashi
Yoshikazu Takahashi
MPMulyo Harris Pradono
Mulyo Harris Pradono
PSPariatmono Sukamdo
Pariatmono Sukamdo
RKRudi Kurniawan
Rudi Kurniawan
Purpose – The paper aims to study the effects of the tsunami that affected Banda Aceh in 2004. Design/methodology/approach – During a survey by Japanese researchers in Banda Aceh and surrounding areas in Indonesia after the great Sumatra earthquake, questionnaires were distributed to the people affected by the earthquake and tsunami. The purpose of the questionnaires was to collect information of what happened and what were expected by the affected people to be safe against future earthquake and tsunami. The questionnaires consisted of questions asking their experience during and after the earthquake and tsunami. Findings – One important result of the questionnaires shows that even if people had started running away just after the big earthquake, the percentage of expected survivors would have been less than 100 percent. Originality/value – The paper shows that education, socialization (software) and escape structures, warning system, wave resisting structures (hardware) are important factors for people to be safer against future earthquake and tsunami attacks.

30 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SRSamsul Rizal
Samsul Rizal
Abdul Khalil H. P. S.Abdul Khalil H. P. S.
Abdul Khalil H. P. S.
SHSHAZLINA ABD HAMID
SHAZLINA ABD HAMID
Esam YahyaEsam Yahya
Esam Yahya
IIIkramullah Ikramullah
Ikramullah Ikramullah
CICHE MOHAMAD HAZWAN BIN CHE ISMAIL
CHE MOHAMAD HAZWAN BIN CHE ISMAIL
In addition to environmental concerns, the presence of microorganisms in plastic food packaging can be hazardous to human health. In this work, cinnamon nanoparticles incorporated with red seaweed (Kappaphycus alvarezii) biopolymer films were fabricated using a solvent casting method. Cinnamon was used as a filler to enhance the properties of the films at different concentrations (1, 3, 5, and 7% w/w) by incorporating it into the matrix network. The physico-chemical, thermal, mechanical, and antimicrobial properties of the cinnamon biopolymer films were obtained using dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transmission infrared spectroscopy (FT-IR), water contact angle (WCA) measurement, thermogravimetric analysis (TGA), mechanical testing, and antimicrobial testing, respectively. The results showed that the addition of cinnamon nanoparticles to the film improved the morphological, mechanical, thermal, wettability, and antibacterial properties of the nanocomposite films. The cinnamon particles were successfully reduced to nano-sized particles with an average diameter between 1 nm and 100 nm. The hydrophobicity of the film increased as the concentration of cinnamon nanoparticles incorporated into the seaweed matrix increased. The tensile and thermal properties of the cinnamon seaweed biopolymer film were significantly improved with the presence of cinnamon nanoparticles. The biopolymer films exhibited good inhibitory activity at 7% cinnamon nanoparticles against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Salmonella bacteria with inhibition zone diameters of 11.39, 10.27, and 12.46 mm, indicating the effective antimicrobial activity of the biopolymer film. The functional properties of the fabricated biopolymer film were enhanced with the addition of cinnamon nanoparticles.

14 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
HHHamdani Hamdani
Hamdani Hamdani
SSSalamul Fajar Sabri
Salamul Fajar Sabri
Harapan HarapanHarapan Harapan
Harapan Harapan
MSMaimun Syukri
Maimun Syukri
RTRizwan Thaib
Rizwan Thaib
SRSamsul Rizal
Samsul Rizal
The controlled environment room, called an isolation room, has become a must have for medical facilities, due to the spreading of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), to isolate the high risk infected patients. To avoid the transmission of the virus through airborne routes, guidelines were published by the government and the association. A medical facility must comply with this document for high-risk patient treatment. A full-scale N class isolation room was built at Syiah Kuala University to investigate the performance in terms of the controller, temperature, pressure, humidity, and energy consumption. The isolation room was equipped with a proper capacity heating, ventilating, and air conditioning (HVAC) system, which consisted of an air conditioning compressor and a negative pressure generator (NPG), and its installation was ensured to fulfil the guidelines. Since the current NPG was controlled manually, a computer-based control system was designed, implemented, and compared with the manual control. The results showed that the computer-based control outputs better stability of pressure and electric power. For that reason, a computer-based control was chosen in the real case. To investigate the performance of the isolation room, a 24 h experiment was carried out under different parameter setups. The results showed that improvement of the control strategy for temperature and humidity is still necessary. The energy consumption during the activation of the NPG for the recommended negative pressure was slightly different. An additional piece of equipment to absorb the heat from the exhaust air would be promising to improve the energy efficiency.

12 April 2023 in F1000Research
Verified
Journal Article
Open access
PDF file
Harapan HarapanHarapan Harapan
Harapan Harapan
HRHibban Ar Royan
Hibban Ar Royan
ITIslam Ing Tyas
Islam Ing Tyas
ANAuda Nadira
Auda Nadira
IAIrham Faraby Abdi
Irham Faraby Abdi
SSSarwo Edhy Sofyan
Sarwo Edhy Sofyan
Background: The decrease of immunity acquired from COVID-19 vaccines is a potential cause of breakthrough infection. Understanding the dynamics of immune responses of vaccine-induced antibodies post-vaccination is important. This study aimed to measure the level of anti-SARS-CoV-2 receptor-binding domain (RBD) total antibody in individuals at different time points upon the receipt of the second dose of CoronaVac vaccine, as well as evaluate the plausible associated factors. Methods: A cross-sectional study was conducted among CoronaVac-vaccinated residents in Banda Aceh, Indonesia. The level of anti-SARS-CoV-2 RBD total antibody was measured using Elecsys immunoassay. A set of standardized and validated questionnaires were used to assess the demographics and other associated factors. Results: Our results showed waning anti-SARS-CoV-2 RBD total antibody titres over time post-vaccination. Compared to samples of the first month post-vaccination, the antibody titres were significantly lower than those of five-months (mean 184.6 vs. 101.8 U/mL, p = 0.009) and six-months post-vaccination (mean 184.6 vs. 95.59 U/mL, p = 0.001). This suggests that the length of time post-vaccination was negatively correlated with titre of antibody. A protective level of antibody titres (threshold of 15 U/mL) was observed from all the samples vaccinated within one to three months; however, only 73.7% and 78.9% of the sera from five- and six-months possessed the protective titres, respectively. The titre of antibody was found significantly higher in sera of individuals having a regular healthy meal intake compared to those who did not (mean 136.7 vs. 110.4 U/mL, p = 0.044), including in subgroup analysis that included those five to six months post-vaccination only (mean 79.0 vs. 134.5 U/mL, p = 0.009). Conclusions: This study provides insights on the efficacy of CoronaVac vaccine in protecting individuals against SARS-CoV-2 infection over time, which may contribute to future vaccination policy management to improve and prolong protective strategy.