Lei Wang

Dr. Lei Wang

Institute of Refrigeration & Cryogenic Engineering, Xi’an Jiaotong University, Xi’an 710049, China
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
JWJiaojiao Wang
Jiaojiao Wang
Yanzhong LiYanzhong Li
Yanzhong Li
Lei WangLei Wang
Lei Wang
Due to the low boiling point of hydrogen, the boiling phenomenon is usually encountered in the applications of liquid hydrogen. The underlying mechanism as well as the physical performance of film boiling over horizontal cylinders are not yet fully understood, especially for the various diameters. In this paper, pool film boiling of hydrogen over horizontal cylinders with diameters ranging from 0.2 to 30 mm is investigated based on the volume-of-fluid method. By the analysis of the gas–liquid interface evolution and the heat transfer mechanism, the cylinders are divided into wire heaters, transition heaters, and tube heaters. The results show that the heat transfer of the wire is affected by the evolution of a single bubble, while the heat transfer of the tube is mainly affected by the movement of multiple crescent-shaped gas structures along the surface. Besides, with the increase in cylinder diameter, the bubble detachment diameter increases, the heat flux decreases correspondingly, and the bubble growth period experiences a complicated principle.

19 February 2025 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
GLGe Liang
Ge Liang
Lei WangLei Wang
Lei Wang
KLKe Li
Ke Li
BLBo Li
Bo Li
YLYanzhong Li
Yanzhong Li

18 November 2022 in Processes
Verified
Journal Article
Open access
PDF file
Chengfeng ZhuChengfeng Zhu
Chengfeng Zhu
Yanzhong LiYanzhong Li
Yanzhong Li
Fushou XieFushou Xie
Fushou Xie
Lei WangLei Wang
Lei Wang
Yuan MaYuan Ma
Yuan Ma
In the propulsion system of cryogenic liquid rockets, low-frequency pressure oscillation is a long-standing issue occurring in its feeding pipe, and is not conducive to the normal operation of the rocket. Its mechanism and excitation process are not very clear due to the limitation of the existing numerical method and the difficulty of the real dynamic experiment. Inspired by the periodic suck-back flow phenomenon of steam condensation, the fluctuation of the two-phase interface might be the crucial factor to initiate the low-frequency pressure oscillation. To simulate this interfacial characteristic of cryogenic propellant, a novel numerical model is proposed to predict the mass transfer rate weighted by the interfacial curvature. Aiming at the oxygen jet condensation simulation, the low-frequency pressure oscillation phenomenon is obtained successfully with the excitation frequency of 10.6 Hz, consistent with the natural frequency of the engine test run. It is conducted so the low-frequency pressure oscillation is caused by the periodic condensation of the continuous oxygen vapour plume, along with an oxygen suck-back flow phenomenon. In addition, the results indicate that both the oxygen and liquid oxygen mass flux promote the rise in the frequency of pressure oscillation. These conclusions provide theoretical instructions for the design and operation of the propulsion system of a cryogenic liquid rocket.

20 April 2023 in Processes
Verified
Journal Article
Open access
PDF file
JLJiajia Liang
Jiajia Liang
Yuan MaYuan Ma
Yuan Ma
Yanzhong LiYanzhong Li
Yanzhong Li
Lei WangLei Wang
Lei Wang
XLXiaozhong Luo
Xiaozhong Luo
A thermal equilibrium model is established to investigate the heat leak of a space liquid hydrogen tank under different thermal adiabatic structures. The feasibility of the common bulkhead tank in realizing thrust or rotation reorientation by evaporated exhaust gas has been systematically studied. The results indicate that the space radiation heat leak is the primary heat leak in spray-on foam insulation (SOFI) adiabatic tanks. However, the common bulkhead heat leak is dominant in the tank with multilayer insulation (MLI) or self-evaporation vapor cooled shield (VCS). For the continuous stable adiabatic exhaust, the tank with SOFI (over 114 W/m2) could realize reorientation with the acceleration of over 5.5 × 10−4 m/s2 generated by the exhaust. Meanwhile, the tank that adopted MLI or VCS (below 18 W/m2) struggled to achieve gas–liquid separation with the acceleration below 8.7 × 10−5 m/s2 generated by exhausting. The rotational angular velocity of the tank through exhausting increases with the fill level dropping and exhaust pressure rising. Reorientation by a TVS intermittent exhaust may be possible in some cases, with sufficient exhaust time. This study provides a theoretical basis for reorientation using the exhaust gas of liquid hydrogen.

28 August 2025 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
JYJian Yang
Jian Yang
Lei WangLei Wang
Lei Wang
YLYanzhong Li
Yanzhong Li

12 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
Lei WangLei Wang
Lei Wang
PSPeijie Sun
Peijie Sun
LYLi Yan
Li Yan
SSShi Shangguan
Shi Shangguan
MQMiao Qu
Miao Qu
Yanzhong LiYanzhong Li
Yanzhong Li
A designed cryogenic upper stage adopted liquid hydrogen and liquid oxygen (LH2/LO2) as an aerospace propellant. During a zero-gravity coast period in space, the wall heat leakage into the delivery tube could induce liquid propellant evaporation and two-phase flow phenomenon, so that a bubble discharge operation must be employed prior to engine restart. In this study, a CFD approach was utilized to numerically study the bubble discharge behaviors inside the LH2 delivery tube of the upper stage. The bubble motion properties under two different schemes, including positive acceleration effect and circulation flow operation, were analyzed and discussed. The results showed that the boiled hydrogen bubbles could increase to the size of the tube inner diameter and distribute randomly within the entire tube volume, and that, in order for the bubble to spill upward under the acceleration effect, a higher acceleration level than the needed value of acquiring liquid–vapor separation inside the propellant tank should be provided. When creating an acceleration level of 10−3 g0, most of the bubbles could spill upward within 700 s. Significantly, the bubbles could not be completely expelled in the created acceleration condition since a number of small bubbles always stagnate in the bulk liquid region. In the circulation flow operation, the gas volume reduction was mainly attributed to two mechanisms: the vapor condensation effect; and bubble discharge effect. For the case with a circulation flow rate of 0.2 kg/s, a complete bubble discharge purpose was reached within 820 s, while a large bubble stagnation in the spherical distributor occupied a remarkable proportion of the total time. In addition, both the liquid flow rate and liquid subcooling exert important effects on bubble performance. When applying a high circulation flow, the gas volume reduction is mainly due to the inertial effect of liquid flow, but the bubble stagnation in the spherical distributor still affects the total discharge time. The liquid subcooling influence on the gas volume reduction is more significant in smaller circulation flow cases. Generally, the present study provides valuable conclusions on bubble motions inside a LH2 delivery tube in microgravity, and the results could be beneficial to the sequence design of engine restart for the cryogenic upper stage.