The attachment performances of mechanical feet are significant in improving the trafficability and mobility of robots on the extreme ground. In the future, frozen-ground robots can be used to replace human soldiers in scouting and deep space exploration. In this study, the influence factors on the attachment function of the bionic feet were analyzed. Soft frozen soil and tight frozen soil close to natural frozen soil were prepared, and the friction between ungula and frozen soil ground was simulated together with the plantar pressures of reindeer under trotting. The major attachment parts were the ungula cusp, outer edges, and ungula capsules, and the stress on the ungula was mainly 4.56–24.72 MPa. According to the microstructures of plantar fur and ungula, the corresponding ratio of the rib width and length was 0.65:1, and the corresponding ratio of the rib width and distance was 3:1. In addition, the scales of the plantar fur were very tightly arranged and had large ripples. Based on typical curves, an ungula capsule-curved surface, and a nonsmooth plantar fur surface, four types of bionic feet and the corresponding ordinary multidamboard foot were designed. On the frozen soil, the bionic foot with ribs and an ungula capsule showed the best attachment performance. Compared with the multidamboard foot, the dynamic coefficient of friction of the bionic foot with ribs and ungula capsules increased by 11.43–31.75%. The attachment mechanism of the bionic feet is as follows: under the action of pressure, the fine patterns of the bionic convex-crown generate friction with the nonsmooth structure of the frozen soil surface, which improves the attachment performance.
This paper proposes a three-phase, traveling-wave-driven electrostatic film motor with a suspended slider. This method constructs a continuously propagating traveling-wave electric field in the air gap by applying a three-phase AC voltage to the stator side and utilizes the electrostatic induction and polarization effects of the slider to achieve continuous translational motion without lead-wire constraints. An integrated structure consisting of a three-phase electrode array, a suspended slider, and a drive system is constructed. This motor features high degrees of freedom of motion and good drive continuity. By establishing a force-electric coupling model and combining it with finite element simulations, the characteristics of the electric field distribution and the driving force generation mechanism are analyzed. The variation law and spatial distribution characteristics of the driving force under different driving voltage conditions, as well as the influence of thrust pulsation on motion stability, are studied. The results show that increasing the driving voltage can effectively enhance the motor's output driving force, but it also leads to more pronounced thrust pulsation. This study verifies the feasibility of the suspended slider-type electrostatic film motor driving scheme and offers new ideas for structural optimization and continuous improvement in drive performance of electrostatic drive systems.