In this paper, sorghum and reed, which possess light stem structures in nature, were selected as biomimetic prototypes. Based on their mechanical stability characteristics—the porous structure at the node feature and the porous feature in the outer skin— biomimetic optimization design, simulation, and experimental research on both the traditional hexagonal structure and a hexagonal honeycomb structure were carried out. According to the two types of straw microcell and chamber structure characteristics, as well as the cellular energy absorption structure for the bionic optimization design, 22 honeycomb structures in 6 categories were considered, including a corrugated cell wall bionic design, a modular cell design, a reinforcement plate structure, and a self-similar structure, as well as a porous cell wall structure and gradient structures of variable wall thickness. Among them, HTPC-3 (a combined honeycomb structure), HSHT (a self-similar honeycomb structure), and HBCT-257 (a radial gradient variable wall thickness honeycomb structure) had the best performance: their energy absorption was 41.06%, 17.84%, and 83.59% higher than that of HHT (the traditional hexagonal honeycomb decoupling unit), respectively. Compared with HHT (a traditional hexagon honeycomb decoupling unit), the specific energy absorption was increased by 39.98%, 17.24%, and 26.61%, respectively. Verification test analysis revealed that the combined honeycomb structure performed the best and that its specific energy absorption was 22.82% higher than that of the traditional hexagonal structure.

This study conducted quasistatic three-point bending tests to investigate the effect of bamboo node on the energy absorption, bending, and deformation characteristics of bamboo. Results showed that the node had a reinforcing effect on the energy absorption and bending strength of the bamboo culm subjected to bending load. The experimental results demonstrated that nodal samples (NS) significantly outperform internodal samples without node (INS). Under the three-point bending load, the main failure mode of bamboo is the fracture failure. The node also showed split and fracture prevention function obviously. Based on that, a series of bionic bumper beams were designed inspired by the bamboo node. The FEM results indicated that the performance of bionic bumpers was better than that of a normal bumper with regard to bending strength, energy absorption, and being lightweight. In particular, the bionic bumper beam has the best performance with regard to bending, energy absorption, and being lightweight compared with the normal bumper under pole impact. The characteristic of the bionic bumper beam is higher than that of the normal bumper beam by 12.3% for bending strength, 36.9% for EA, and 31.4% for SEA; moreover, there was a mass reduction of 4.9%, which still needs further optimization.

In order to enhance energy absorption, this study draws inspiration from the diagonal bilinear robust square lattice structure found in deep-sea glass sponges, proposing a design for thin-walled structures with superior folding capabilities and high strength-to-weight ratio. Firstly, the crashworthiness of bionic glass sponge tube (BGSTO) is compared with that of equal-wall-thickness equal-mass four-X tube through both experiments and simulations, and it is obtained that the specific energy absorption of BGSTO is increased by 78.64%. And the crashworthiness of BGSTO is also most significant compared to that of multicellular tubes with the similar number of crystalline cells. Additionally, we found that the double-line spacing of the glass sponge can be freely adjusted without changing the material amount. Therefore, based on BGSTO, we designed two other double-line structures, BGSTA and BGSTB. Then with equal wall thickness and mass as a prerequisite, this study proceeds to design and compare the energy absorption properties of three bilinear thin-walled tubes in both axial and lateral cases. The deformation modes and crashworthiness of the three types of tubes with variable bilinear spacing (β_O/A/B ) are comparatively analysed. The improved complex proportional assessment (COPRAS) synthesis decision is used to obtain that BGSTO exhibits superior crashworthiness over the remaining two kinds of tubes. Finally, a surrogate model is established to perform multi-objective optimization on the optimal bilinear configuration BGSTO selected by the COPRAS method.

Node-containing straws exhibit superior mechanical properties compared to node-free straw plants, particularly in terms of shear resistance and compression resistance. We explore the relationship between the structure and mechanical properties of straw materials, providing deeper insights for the field of biomechanics. In this study, we focused on two node-containing straw plants, namely sorghum and reed. The main characteristics of sorghum and reed stalks were compared using macroscopic observation, stereomicroscopy, scanning electron microscopy, infrared spectroscopy, and EDS analysis. This study revealed numerous similarities and differences in the macro- and microstructures as well as the elemental composition of sorghum and reed stalks. The functional groups in sorghum and reed stalks were largely similar, with the primary elements being C and O. Distinguishing features included a higher tapering and a slightly larger reduction in wall thickness in sorghum stalks compared to reed stalks. The cross-section of sorghum stalks was filled with pith structures, while reed stalks exhibited a hollow structure. The vascular bundles in sorghum typically showed a paired arrangement, whereas those in reeds were arranged in odd numbers. Furthermore, sorghum straws contained more Cl and no Br, while the parenchyma of reed straws contained higher Br. The C and O proportions of sorghum straws and reed straws are 50–53% (50–51%) and 45–46% (48–49%), respectively. These variations in elemental composition are believed to be correlated with the mechanical properties of the materials. By conducting a detailed study of the micro/macrostructures and material composition of sorghum and reed straw, this paper provides valuable insights for the field of biomechanics.

Honeycomb structures are widely used in the field of impact resistance and are constantly being developed and updated. In this paper, the design of three new aluminum alloy rotating thin-walled structures (NRTS) are examined. These structures combine common concave structures and rotating, rigid-body structures. The purpose of this study is to solve the problem of the poor energy absorption capacity of rotating, rigid-body structure due to small deformation and to provide a reference for honeycomb mechanism designs. The Young’s modulus, the critical velocity, and the platform stress of the NRTS structure are derived from theoretical analysis. The dynamic response of the NRTS structure at different impact velocities is investigated using finite element simulation software. The results show that the rotating, thin-walled recessed honeycomb (RTRH) increases the plateau stress by 124% and 51% as compared to rotating, thin-walled square tubes (RTSTs) and the re-entrant hexagonal structure (RH), respectively; the rotating, thin-walled quadruple-arc honeycomb structure (RTQH) increases the SEA by 21% and 20% as compared to the RTST and RH, respectively; and the rotating thin-walled double-arc honeycomb structure (RTDH) increases the CEF by 54% and 51% as compared to the RTST and RH, respectively. During the study, it was demonstrated that NTRS also exhibits good energy absorption capacity. Then, the effect of rotation angle on the energy absorption performance was analyzed. The cell and wall thickness of the NTRS structure were optimized according to the gradient theory. It was proved that the gradient optimized structure has better energy absorption performance as compared to the uniform structure.