Hazwani Suhaimi

Dr. Hazwani Suhaimi

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 January 2023 in Gels
Verified
Journal Article
Open access
PDF file
MKMurugiah Krishani
Murugiah Krishani
WSWong Yen Shin
Wong Yen Shin
HSHazwani Suhaimi
Hazwani Suhaimi
Nonni Soraya SambudiNonni Soraya Sambudi
Nonni Soraya Sambudi
Tissue damage and organ failure are major problems that many people face worldwide. Most of them benefit from treatment related to modern technology’s tissue regeneration process. Tissue engineering is one of the booming fields widely used to replace damaged tissue. Scaffold is a base material in which cells and growth factors are embedded to construct a substitute tissue. Various materials have been used to develop scaffolds. Bio-based natural materials are biocompatible, safe, and do not release toxic compounds during biodegradation. Therefore, it is highly recommendable to fabricate scaffolds using such materials. To date, there have been no singular materials that fulfill all the features of the scaffold. Hence, combining two or more materials is encouraged to obtain the desired characteristics. To design a reliable scaffold by combining different materials, there is a need to choose a good fabrication technique. In this review article, the bio-based natural materials and fine fabrication techniques that are currently used in developing scaffolds for tissue regeneration applications, along with the number of articles published on each material, are briefly discussed. It is envisaged to gain explicit knowledge of developing scaffolds from bio-based natural materials for tissue regeneration applications.

14 January 2021 in Environments
Verified
Journal Article
Open access
PDF file
WHWong Jun Hong
Wong Jun Hong
NSNorazanita Shamsuddin
Norazanita Shamsuddin
Pg Emeroylariffion AbasPg Emeroylariffion Abas
Pg Emeroylariffion Abas
RArosyzie anna Haji Mohd Apong
rosyzie anna Haji Mohd Apong
ZMZarifi Masri
Zarifi Masri
MNMuhammad Nafi Aqmal Noh
Muhammad Nafi Aqmal Noh
Water is a quintessential element for the survival of mankind. Its variety of uses means that it is always in a constant state of demand. The supply of water most primarily comes from large reservoirs of water such as lakes, streams, and the ocean itself. As such, it is good practice to monitor its quality to ensure it is fit for human consumption. Current water quality monitoring is often carried out in traditional labs but is time consuming and prone to inaccuracies. Therefore, this paper aims to investigate the feasibility of implementing an Arduino-based sensor system for water quality monitoring. A simple prototype consisting of a microcontroller and multiple attached sensors was employed to conduct weekly onsite tests at multiple daily intervals. It was found that the system works reliably but is reliant on human assistance and prone to data inaccuracies. The system however, provides a solid foundation for future expansion works of the same category to elevate the system to being Internet of Things (IoT) friendly.

4 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Fatin Amanina AzisFatin Amanina Azis
Fatin Amanina Azis
MCMelanie Choo
Melanie Choo
HSHazwani Suhaimi
Hazwani Suhaimi
Pg Emeroylariffion AbasPg Emeroylariffion Abas
Pg Emeroylariffion Abas
A home electrical composter has arisen as a popular tool to expedite the lengthy composting process. It has been conveniently selected as a compost producer in kitchen households and is especially favoured in urbanized settings. The generated composts from the electrical composter, however, are still found to be immature and would require additional curing. The quality of the compost can be improved by investigating the initial carbon-to-nitrogen ratio (C/N ratio) of kitchen waste. It is, therefore, the aim of this paper to determine the optimum initial C/N ratio by preparing two primary samples: with and without soil. Samples of 10:1, 15:1, 20:1, 25:1, 30:1, and 35:1 C/N ratios were fed into the electrical composter and allowed to cure for 4 weeks. The six main samples were further divided into sub-samples for replications. The phytotoxicity levels and maturity of the produced compost were assessed in terms of the germination index (GI), using a seed germination test. In addition, statistical analyses using box plots and T-distributed Stochastic Neighbour Embedding (T-SNE) were carried out to observe the root growths’ variability and to deduce any significant clusters amongst the samples. The results have shown that samples with and without soil performed better with C/N ratios of 10:1 and 25:1 and with GI values of 16.2 and 31.8, respectively. The results also indicate the presence of a substantial level of phytotoxins within the samples, even after four weeks of curing.

18 May 2022 in Inventions
Verified
Journal Article
Open access
PDF file
Fatin Amanina AzisFatin Amanina Azis
Fatin Amanina Azis
MRMasrur Rijal
Masrur Rijal
HSHazwani Suhaimi
Hazwani Suhaimi
Pg Emeroylariffion AbasPg Emeroylariffion Abas
Pg Emeroylariffion Abas
Organic waste management is a major global challenge. It accounts for a significant portion of waste that ends up in landfills, where it gradually decomposes and emits methane, a harmful greenhouse gas. Composting is an effective method for potentially solving the problem by converting organic waste into valuable compost. Despite many studies focusing on the composting process, no study has reviewed the technological advancements in the composting fields from the perspective of patents. This review paper begins with background information on the composting process, specifically important factors affecting the process, problems associated with it, and the available technologies to facilitate the process. Different technologies are discussed, ranging from manual to automated methods. Subsequently, 457 patents are selected, classified into different categories, and reviewed in detail, providing a patent technology landscape of composting technology. Automatic composters are more prominent than manual ones as managing organic waste at the source has become more crucial in recent years. The need for a domestic composter creates an opportunity for the development of a compact and automated system for organic waste management, which is more suitable for urbanized settings. This technology has the potential to reduce the amount of organic waste that needs to be managed at an already overburdened landfill, as well as the environmental consequences associated with it.

7 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
RARatna
Ratna
SASri Aprilia
Sri Aprilia
Nasrul ArahmanNasrul Arahman
Nasrul Arahman
Muhammad Roil BiladMuhammad Roil Bilad
Muhammad Roil Bilad
HSHazwani Suhaimi
Hazwani Suhaimi
Indera Sakti NasutionIndera Sakti Nasution
Indera Sakti Nasution
This study develops bio-nano composite gelatin-based edible film (NEF) by combining nanogelatin, cellulose nanocrystal (CNC), and nanopropolis (NP) fillers to improve the resulting film characteristics. The NEF was characterized in terms of thickness, swelling, pH, water content, solubility, vapor and oxygen permeability, mechanical properties, heat resistance, morphology, transparency, and color. The results showed that the thickness and swelling increased significantly, whilst the pH did not significantly differ in each treatment. The water content and the water solubility also showed no significant changes with loadings of both fillers. At the same time, vapor and oxygen permeability decreased with addition of the fillers but were not significantly affected by the loading amounts. The heat resistance properties increased with the filler addition. Tensile strength and Young’s modulus increased for the films loaded with >3% CNC. The elongation at break showed a significant difference together with transparency and color change. The greater the CNC concentration and NP loading were, the darker the resulting transparency and the color of the NEF. Overall results show a considerable improvement in the properties of the resulting NEFs with the incorporation of CNC and NP fillers.

17 February 2020 in Metals
Verified
Journal Article
Open access
PDF file
AIAsif Iqbal
Asif Iqbal
HSHazwani Suhaimi
Hazwani Suhaimi
WZWei Zhao
Wei Zhao
Muhammad JamilMuhammad Jamil
Muhammad Jamil
MNMalik Muhammad Nauman
Malik Muhammad Nauman
JZJuliana Zaini
Juliana Zaini
Ti-6Al-4V, the most commonly used alloy of titanium, possesses excellent mechanical properties and corrosion resistance, which is the prime reason for the continual rise in its industrial demand worldwide. The extraordinary mechanical properties of the alloy are viewed as a hindrance when it comes to its shaping processes, and the process of milling is no exception to it. The generation of intense heat flux around the cutting zones is an established reason of poor machinability of the alloy and unacceptably low sustainability of its machining. The work presented in this paper attempts to enhance sustainability of milling Ti-6Al-4V by investigating the effects of milling orientation, cutter’s helix angle, cutting speed, and the type of cryogenic coolant and lubricant on the sustainability measures, such as tool damage, cutting energy consumption, process cost, milling forces, and work surface roughness. It was found that micro-lubrication is more effective than the two commonly used cryogenic coolants (carbon dioxide snow and liquid nitrogen) in reducing tool wear, work surface roughness, process cost, and energy consumption. Furthermore, down-milling enormously outperformed up-milling with respect to tool wear, work surface quality, and process cost. Likewise, the high levels of cutter’s helix angle and cutting speed also proved to be beneficial for milling sustainability.