Jonathan Dane Lundquist

Mr. Jonathan Dane Lundquist

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2021 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
UHUmar Hasni
Umar Hasni
MPMcKenzie E. Piper
McKenzie E. Piper
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
ETErdem Topsakal
Erdem Topsakal
In this paper, two antennas for wearable applications are presented, including the development of new antennas on fabric substrates for communication with in-body and outside the body sensors. The design process for fabrication via screen printing on fabric substrates is outlined using commercially available conductive inks. The effects of non-conductive, paint-based inks as interface layers between conductive elements and fabric substrates of coplanar keyhole fabric antennas is presented along with wash sustainability and its effects on antenna resonance at 5.8 GHz over time. Fabrication of screen-printed radio frequency identification tag antenna includes placement of the tag chip. Accessibility of the tag is assessed by comparing reader data to distance between the reader and the tag at 915 MHz.

10 April 2023 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
LLLauren Linkous
Lauren Linkous
UHUmar Hasni
Umar Hasni
ETErdem Topsakal
Erdem Topsakal
We report the fabrication methodology of stereolithography (SLA) printed molds for metal and resin cast antennas. In the first method, a conical horn created using metal cast molds printed from a glass-filled resin utilizes a casting technique allowing for low-cost 3D printing to fabricate metal antennas, reducing the losses incurred by metallized plastics, while still producing complex geometries quickly. This metal cast conical horn is compared to a horn constructed using a more traditional 3D printing method. The second casting method demonstrates the interchangeability between creating parts via SLA printing with a glass-filled resin and using the same resin cast into a reusable Polydimethylsiloxane (PDMS) mold. We demonstrate this method by casting an interchangeable slug for a capacitively coupled, mechanically reconfigurable disk loaded monopole. Simulated and experimental data are presented for S11, and Gain. Simulated BW, directivity, gain and efficiency as a function of frequency are presented. The results indicate that the 3D printed metal casting process produces antennas with a higher gain and lower return loss than metallized resin antennas. The method is suitable for difficult geometries requiring resolution of at least 50 lm. The capacitively coupled disk loaded monopole demonstrates the versatility of 3D printing in antenna fabrication.

12 February 2024 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
LLLauren Linkous
Lauren Linkous
MPMcKenzie E. Piper
McKenzie E. Piper
ZSZoey Sickey
Zoey Sickey
KZKatya Zimmet
Katya Zimmet
ETErdem Topsakal
Erdem Topsakal
Growing demand in the wearable device industry for noninvasive, user-connected, and real-time activity trackers and body monitors is increasing the need for low-profile wearable antennas on fabric substrates, particularly for health and safety applications. Current data regarding environmental and human factors in this field that affect the real-world use of the devised antennas are incomplete. This article presents data regarding the impact of garment position, especially the distance between the skin and fabric substrate, on antenna performance. A distance of the substrate from the skin in the less than a 5-mm range was found to have a significant influence on antenna performance. The effects of humidity and dampness on the permittivity of five types of fabrics commonly used in commercial and health care-related garments are also investigated. The performance of a textile-based RFID printed directly on a nonconductive interface layer situated on single jersey knit cotton fabric was studied, and sheet resistance results of inkjet printing with two conductive nanoparticle inks from NovaCentrix are presented.

21 May 2022 in Biosensors
Verified
Journal Article
Open access
PDF file
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
BHBenjamin Mark Horstmann
Benjamin Mark Horstmann
DPDmitry Pestov
Dmitry Pestov
ÜÖÜmit Özgür
Ümit Özgür
VAVitaliy Avrutin
Vitaliy Avrutin
ETErdem Topsakal
Erdem Topsakal
Wearable biosensors for continuous health monitoring, particularly those used for glucose detection, have a limited operational lifetime due to biodegradation and fouling. As a result, patients must change sensors frequently, increasing cost and patient discomfort. Arrays of multiple sensors, where the individual devices can be activated on demand, increase overall operational longevity, thereby reducing cost and improving patient outcomes. This work demonstrates the feasibility of this approach via decomposition of combustible nitrocellulose membranes that protect the individual sensors from exposure to bioanalytes using a current pulse. Metal contacts, connected by graphene-loaded PEDOT:PSS polymer on the surface of the membrane, deliver the required energy to decompose the membrane. Nitrocellulose membranes with a thickness of less than 1 µm consistently transfer on to polydimethylsiloxane (PDMS) wells. An electrical energy as low as 68 mJ has been shown to suffice for membrane decomposition.

31 December 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
RFRaisa Fabiha
Raisa Fabiha
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
ETErdem Topsakal
Erdem Topsakal
Supriyo BandyopadhyaySupriyo Bandyopadhyay
Supriyo Bandyopadhyay
Conventional electromagnetic antennas cannot be aggressively miniaturized since their gain and radiation efficiency plummet when their sizes become much smaller than the radiated wavelength. Recently, we demonstrated a new genre of unconventional extreme sub-wavelength nano-antennas that are several orders of magnitude smaller than the wavelength they radiate, and yet they radiate efficiently, beating the conventional Harrington limits on the gain and radiation efficiency by many orders of magnitude. This is made possible by their unique unconventional mechanism of activation. These nano-antennas are implemented with two dimensional periodic arrays of ~100 nm sized nanomagnets deposited on piezoelectric substrates. A surface acoustic wave (SAW) launched in the substrate excites resonant spin waves in the nanomagnets at discrete (GHz) frequencies via phonon-magnon coupling, which radiate electromagnetic waves very efficiently at those frequencies via magnon-photon coupling. Normally, one would expect such ultrasmall antennas to behave as point sources that radiate isotropically. Surprisingly, they do not because of the intrinsic anisotropy in the nanomagnet array. The radiation patterns in the plane of the nanomagnets and the two transverse planes are anisotropic. By changing the direction of SAW propagation in the plane of the nanomagnets, one can change the radiation patterns in all three planes, which heralds a new method of beam steering or active electronic scanning.

2 July 2025 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
LLLauren Linkous
Lauren Linkous
JLJonathan Dane Lundquist
Jonathan Dane Lundquist
MSMichael John Suche
Michael John Suche
ETErdem Topsakal
Erdem Topsakal
As antenna design research progresses into more advanced techniques, recurrent manual editing of CAD models is one of the last, laborious obstacles for fully automated optimization. In this article we present AntennaCAT (Antenna Calculation and Autotuning Tool), which is designed to lower the barrier to entry for advanced antenna design and optimization while increasing the repeatability of the experimental process. AntennaCAT is open source software that automates the design, simulation, and optimization processes. It is compatible with multiple electromagnetic (EM) simulation software suites, including HFSS, CST, and FEKO, and includes integrated optimizers popular for multiparameter antenna design problems. Discussed are major software features for design, data collection and interpretation for machine learning (ML), internal simulation-integrated optimizers and their ML assisted hyperparameter tuning, and significance for replication studies.