5 April 2021 in IEEE Open Journal of Antennas and Propagation
In this paper, two antennas for wearable applications are presented, including the development of new antennas on fabric substrates for communication with in-body and outside the body sensors. The design process for fabrication via screen printing on fabric substrates is outlined using commercially available conductive inks. The effects of non-conductive, paint-based inks as interface layers between conductive elements and fabric substrates of coplanar keyhole fabric antennas is presented along with wash sustainability and its effects on antenna resonance at 5.8 GHz over time. Fabrication of screen-printed radio frequency identification tag antenna includes placement of the tag chip. Accessibility of the tag is assessed by comparing reader data to distance between the reader and the tag at 915 MHz.
12 February 2024 in IEEE Antennas and Propagation Magazine
Growing demand in the wearable device industry for noninvasive, user-connected, and real-time activity trackers and body monitors is increasing the need for low-profile wearable antennas on fabric substrates, particularly for health and safety applications. Current data regarding environmental and human factors in this field that affect the real-world use of the devised antennas are incomplete. This article presents data regarding the impact of garment position, especially the distance between the skin and fabric substrate, on antenna performance. A distance of the substrate from the skin in the less than a 5-mm range was found to have a significant influence on antenna performance. The effects of humidity and dampness on the permittivity of five types of fabrics commonly used in commercial and health care-related garments are also investigated. The performance of a textile-based RFID printed directly on a nonconductive interface layer situated on single jersey knit cotton fabric was studied, and sheet resistance results of inkjet printing with two conductive nanoparticle inks from NovaCentrix are presented.
8 August 2026 in Acta Biomaterialia