Accurate location information has significant commercial and economic value as they are widely used in intelligent manufacturing, material localization and smart homes. Magnetic sequence-based approaches show great promise mainly due to their pervasiveness and stability. However, existing geomagnetic indoor localization methods are facing the problems of location ambiguity and feature extraction deficiency, which will lead to large localization errors. To address these issues, we propose a coarse-to-fine geomagnetic indoor localization method based on deep learning. First, a multidimensional geomagnetic feature extraction method is presented which can extract magnetic features from spatial and temporal aspects. Then, a hierarchical deep neural network model is devised to extract more accurate geomagnetic information and corresponding location clues for more accurate localization. Finally, localization is achieved through a particle filter combined with IMU localization. To evaluate the performance of the proposed methods, we carried out several experiments at three trial paths with two heterogeneous devices, Vivo X30 and Huawei Mate30. Experimental results demonstrate that the proposed algorithm can achieve more accurate localization performance than the state-of-the-art methods. Meanwhile, the proposed algorithm has low cost and good pervasiveness for different devices.
Accurate indoor localization estimation has important social and commercial values, such as indoor location services and pedestrian retention times. Acoustic-based methods can achieve high localization accuracies in specific scenarios with special equipment; however, it is a challenge to obtain accurate localization with general equipment in indoor environments. To solve this problem, we propose a novel fusion CHAN and the improved pedestrian dead reckoning (PDR) indoor localization system (CHAN-IPDR-ILS). In this system, we propose a step length estimation method that adds the previous two steps for extracting more accurate information to estimate the current step length. The maximum influence factor is set for the previous two steps to ensure the importance of the current step length. We also propose a heading direction correction method to mitigate the errors in sensor data. Finally, pedestrian localization is achieved using a motion model with acoustic estimation and dynamic improved PDR estimation. In the fusion localization, the threshold and confidence level of the distance between estimation base-acoustic and improved PDR estimation are set to mitigate accidental and cumulative errors. The experiments were performed at trial sites with different users, devices, and scenarios, and experimental results demonstrate that the proposed method can achieve a higher accuracy compared with the state-of-the-art methods. The proposed fusion localization system manages equipment heterogeneity and provides generality and flexibility with different devices and scenarios at a low cost.
Accurate indoor location information has considerable social and economic value in applications, such as pedestrian heatmapping and indoor navigation. Ultrasonic-based approaches have received significant attention mainly since they have advantages in terms of positioning with temporal correlation. However, it is a great challenge to gain accurate indoor localization due to complex indoor environments such as non-uniform indoor facilities. To address this problem, we propose a fusion localization method in the indoor environment that integrates the localization information of inertial sensors and acoustic signals. Meanwhile, the threshold scheme is used to eliminate outliers during the positioning process. In this paper, the estimated location is fused by the adaptive distance weight for the time difference of arrival (TDOA) estimation and improved pedestrian dead reckoning (PDR) estimation. Three experimental scenes have been developed. The experimental results demonstrate that the proposed method has higher localization accuracy in determining the pedestrian location than the state-of-the-art methods. It resolves the problem of outliers in indoor acoustic signal localization and cumulative errors in inertial sensors. The proposed method achieves better performance in the trade-off between localization accuracy and low cost.
Binocular stereo vision technology has been widely used in target detection, unmanned driving and other aspects due to its advantages of low cost and wide range of application. It is a research hotspot in the field of computer vision. Binocular stereo vision is mainly to obtain 3D depth information of the scene by analyzing two or more views of the scene. Stereo matching is the core part of the scene, and the performance of the matching algorithm directly affects the effect of 3D reconstruction. This paper mainly analyzes and summarizes the local stereo matching algorithm, global stereo matching algorithm and semi-global stereo matching algorithm by studying stereo matching algorithms at home and abroad, expounds the characteristics and performance of various matching algorithms, and makes a comparative analysis of various algorithms.
1 January 2021 in Wireless Communications and Mobile Computing
Indoor 3D positioning system requires precise information from all three dimensions in space, but measurements in the vertical direction are usually interfered by sensors properties, unexpected obstructions, and other factors. Thus, accuracy and robustness are not guaranteed. Aiming at this problem, we propose a novel sensor fusion algorithm to improve the height estimation for a UWB‐barometer integrated positioning system by introducing a pseudo reference update mechanism and the extended Kalman filter (EKF). The proposed fusion approach effectively helps with sensing noise reduction and outlier restraint. The results from numerical experiment investigations demonstrate that the accuracy and robustness of the proposed method achieved better improvement in height determination.
Location-based services provide significant economic and social benefits. The ubiquity, low cost, and accessibility of geomagnetism are highly advantageous for localization. However, the existing geomagnetic localization methods suffer from location ambiguity. To address these issues, we propose a fusion localization algorithm based on particle swarm optimization. First, we construct a five-dimensional hybrid LSTM (5DHLSTM) neural network model, and the 5DHLSTM network structure parameters are optimized via particle swarm optimization (PSO) to achieve geomagnetic localization. The eight-dimensional BiLSTM (8DBiLSTM) algorithm is subsequently proposed for heading estimation in dead reckoning, which effectively improves the heading accuracy. Finally, fusion localization is achieved by combining geomagnetic localization with an improved pedestrian dead reckoning (IPDR) based on an extended Kalman filter (EKF). To validate the localization performance of the proposed PSO-5DHLSTM-IPDR method, several extended experiments using Xiaomi 10 and Hi Nova 9 are conducted in two different scenarios. The experimental results demonstrate that the proposed method improves localization accuracy and has good robustness and flexibility.