Gravity on Earth is of great interest in geodesy, geophysics, and natural resource exploration. Ship-based gravimeters are a widely used instrument for the collection of surface gravity field data in marine regions. However, due to the considerable distance from the sea surface to the seafloor, the spatial resolution of surface gravity data collected from ships is often insufficient to image the detail of seafloor geological structures and to explore offshore natural minerals. Therefore, the development of a mobile underwater gravimetry system is necessary. The GraviMob gravimeter, developed for a moving underwater platform by Geo-Ocean (UMR 6538 CNRS-Ifremer-UBO-UBS), GeF (UR4630, Cnam) and MAPPEM Geophysics, has been tested over the last few years. In this study, we report on the high-resolution gravity measurements from the GraviMob system mounted on an Autonomous Underwater Vehicle, which can measure at depths of up to several kilometres. The dedicated GraviMob underwater gravity measurements were conducted in the Mediterranean Sea in March 2016, with a total of 26 underwater measurement profiles. All these measurement profiles were processed and validated. In a first step, the GraviMob gravity measurements were corrected for temperature based on a linear relationship between temperature and gravity differences. Through repeated profiles, we acquired GraviMob gravity measurements with an estimated error varying from 0.8 to 2.6 mGal with standard deviation after applying the proposed temperature correction. In a second step, the shipborne gravity data were downward continued to the measurement depth to validate the GraviMob measurements. Comparisons between the corrected GraviMob gravity anomalies and downward continued surface shipborne gravity data revealed a standard deviation varying from 0.8 to 3.2 mGal and a mean bias value varying from −0.6 to 0.6 mGal. These results highlight the great potential of the GraviMob system in measuring underwater gravity.
1 January 2016 in Géomorphologie : relief, processus, environnement
Les travaux conduits pendant 2 ans sur un tronçon du Loir (débit moyen de 24 m3/s, largeur moyenne de 40 m, profondeur moyenne de 2,5 m) et sur trois sites (Ruillé, Bruant, et Cherré), ont permis de déterminer les conditions de la dynamique fluviale pour ce cours d'eau de faible énergie, dont la pente du lit est inférieure à 1 ‰. Deux campagnes de mesure ont été effectuées entre 2013 et 2015 : mesure du recul des berges par LIDAR terrestre 3D et levés bathymétriques par échosondeur multi-faisceaux. La faiblesse de l’érosion a nécessité la mise au point d'une méthodologie adaptée (et transposable à d’autres systèmes fluviaux de faible énergie) pour le traitement et l’interprétation des résultats des mesures afin d’évaluer les modifications réelles intervenues d’une campagne de mesure à l’autre. Celles-ci sont ponctuelles, et les formes ainsi façonnées sont très variées. Les résultats principaux mis en évidence sont : (i) des reculs de berges de 0,80 m à 1,40 m intervenus localement en quelques mois, au cours de la saison de hautes eaux (sans crues de forte magnitude), (ii) de faibles modifications du fond du lit qui comprend par ailleurs entre les hauts fonds toujours submergés, des surcreusements (mouilles) de 1,5 à 1,8 m de profondeur. La charge solide mise en mouvement dans le chenal, majoritairement de texture fine (sables fins et limons), est évacuée vers l'aval. Des matériaux grossiers (galets de 5 à 9 cm de longueur), qui affleurent localement dans les berges, tapissent le fond du lit où ils forment un pavage. Cela oblige l’érosion, là où elle se manifeste, à se reporter sur les berges.
The purpose of this paper is to present the design, development and testing of an innovative instrument called GraviMob, which allows performing dynamic measurements of underwater gravity anomalies. After recalling the interest in underwater gravimetry, we describe the system, the core of which consists of triads of accelerometers rigidly attached to an Autonomous Underwater Vehicle (AUV). The article also presents the mathematical methods for estimating the east, north and vertical components of the local gravity vector. An unscented Kalman filter, integrating AUV position and orientation data, performs estimation of gravity in a frame adapted to its interpretation. To assess its performance, GraviMob was tested in the Mediterranean Sea during the year 2016. A comparison of the surface gravimetric signal previously acquired by the French Navy indicates that the maximum discrepancy between the vertical gravity component and its reference is below 4 mGal. Components of the vertical deflection calculated from GraviMob’s measurements were compared with those calculated from recent gravity field models. While a remarkable agreement was found on the north component, there remains a discrepancy (7 arcsec) on the east component which can be largely reduced by refining the estimation of the orientation of GraviMob’s sensitive axes in the AUV.
Today, land and ocean observations are crucial for monitoring climate change. The method of GNSS reflectometry is an opportunistic way to provide low-cost observations of many geophysical parameters. However, although this method has been the subject of numerous research studies, work is still in progress to improve its possibilities and fields of application. This paper focuses on GNSS reflectometry using carrier phase measurements for water altimetry measurements. The difficulties in implementing such a method lie in the need to collect a coherent signal and to solve the integer ambiguity value. In this context, the implementation of innovative signal processing is described, including the correlation of the reflected signals in dedicated software and the prolongation of the coherent integration time to enhance signal coherency. These processes were applied to data collected over Carcans-Hourtin Lake in France to compute the height of the reflection surface which was then compared to in situ GNSS buoy height measurements. The results show that at 300 ft (91.44 m), the differences between the lake heights measured with the buoy and with the reflectometry data can reach less than 1 cm for the L1, E1 and E5 GNSS signals. In addition, the slope of the geoid estimated with the reflectometry data is very consistent with that of the RAF20 geoid model, with a difference of up to less than 2 mm/km.