The increasing availability of geophysical models of the Earth's lithosphere and mantle has generated renewed interest in computation of theoretical gravity effects at global and regional scales. At the same time, the increasing availability of gravity gradient anomalies derived from satellite measurements, such as those provided by GOCE satellite, requires mathematical methods that directly model the gravity gradient anomalies in the same reference frame as GOCE gravity gradients. Our main purpose is to interpret these anomalies in terms of source and density distribution. Numerical integration methods for calculating gravity gradient values are generally based on a mass discretization obtained by decomposing the Earth's layers into a finite number of elementary solid bodies. In order to take into account the curvature of the Earth, spherical prisms or ‘tesseroids’ have been established unequivocally as accurate computation tools for determining the gravitational effects of large-scale structures. The question which then arises from, is whether gravity calculation methods using spherical prisms remain valid when factoring in the ellipticity of the Earth. In the paper, we outline a comprehensive method to numerically compute the complete gravity field with the help of the Gauss–Legendre quadrature involving ellipsoidal shaped prisms. The assessment of this new method is conducted by comparison between the gravity gradient values of simple sources obtained by means of numerical and analytical calculations, respectively. A comparison of the gravity gradients obtained from PREM and LITHO1.0 models using spherical- and ellipsoidal-prism-based methods is also presented. Numerical results indicate that the error on gravity gradients, caused by the use of the spherical prism instead of its ellipsoidal counterpart to describe an ellipsoidally shaped Earth, is useful for a joint analysis with those deduced from GOCE satellite measurements. Provided that a suitable scaling of prism densities has been performed, the spherical approximation error at GOCE height hardly reaches 1 mE for the entire Earth's lithosphere. The error attains 6 mE at a peak for a complete modeling of the Earth, from the crust down to the internal core.
In February 1998, a regional-scale, airborne gravity survey was carried out over the French Occidental Alps within the framework of the GéoFrance 3-D research program.The survey consisted of 18 NS and 16 EW oriented lines with a spacing of 10 and 20 km respectively, covering the whole of the Western French Alps (total area: 50 000 km2; total distance of lines flown: 10 000 km). The equipment was mounted in a medium-size aircraft (DeHavilland Twin Otter) flowing at a constant altitude of 5100 m a.s.l, and at a mean ground speed of about 280 km h−1. Gravity was measured using a LaCoste & Romberg relative, air/sea gravimeter (type SA) mounted on a laser gyro stabilized platform. Data from 5 GPS antennae located on fuselage and wings and 7 ground-based GPS reference stations were used to determine position and aircraft induced accelerations.The gravimeter passband was derived by comparing the vertical accelerations provided by the gravimeter with those estimated from the GPS positions. This comparison showed that the gravimeter is not sensitive to very short wavelength aircraft accelerations, and therefore a simplified formulation for computing airborne gravity measurements was developed. The intermediate and short wavelength, non-gravitational accelerations were eliminated by means of digital, exponential low-pass filters (cut-off wavelength: 16 km). An important issue in airborne gravimetry is the reliability of the airborne gravity surveys when compared to ground surveys. In our studied area, the differences between the airborne-acquired Bouguer anomaly and the ground upward-continued Bouguer anomaly of the Alps shows a good agreement: the rms of these differences is equal to 7.68 mGal for a spatial resolution of 8 km. However, in some areas with rugged topography, the amplitudes of those differences have a striking correlation with the topography. We then argue that the choice of an appropriate density (reduction by a factor of 10 per cent) for computing the ground topographic corrections over the highest mountains, results in significantly reducing the differences between airborne and ground upward-continued Bouguer anomalies, which shows that some of the misfit stems from errors in the ground data.
Environmental loading, in particular from continental water storage changes, induces geodetic station displacements up to several centimeters for the vertical components. We investigate surface deformation due to loading processes in South America using a set of 247 permanent GPS (Global Positioning System) stations for the 2003–2016 period and compare them to loading estimates from global circulation models. Unfortunately, some of the hydrological components, and in particular surface waters, may be missing in hydrological models. This is especially an issue in South America where almost half of the seasonal water storage variations are due to surface water changes, e.g., rivers and floodplains. We derive river storage variations by rerouting runoffs of global hydrology models, allowing a better agreement with the mass variations observed from GRACE (Gravity Recovery and Climate Experiment) mission. We extract coherent seasonal GPS displacements using Multichannel Singular Spectrum Analysis (M-SSA) and show that modeling the river storage induced loading effects significantly improve the agreement between observed vertical and horizontal displacements and loading models. Such an agreement has been markedly achieved in the Amazon basin. Whilst the initial models only explained half of the amplitude of GPS, the new ones compensate for these gaps and remain consistent with GRACE.
Gravity on Earth is of great interest in geodesy, geophysics, and natural resource exploration. Ship-based gravimeters are a widely used instrument for the collection of surface gravity field data in marine regions. However, due to the considerable distance from the sea surface to the seafloor, the spatial resolution of surface gravity data collected from ships is often insufficient to image the detail of seafloor geological structures and to explore offshore natural minerals. Therefore, the development of a mobile underwater gravimetry system is necessary. The GraviMob gravimeter, developed for a moving underwater platform by Geo-Ocean (UMR 6538 CNRS-Ifremer-UBO-UBS), GeF (UR4630, Cnam) and MAPPEM Geophysics, has been tested over the last few years. In this study, we report on the high-resolution gravity measurements from the GraviMob system mounted on an Autonomous Underwater Vehicle, which can measure at depths of up to several kilometres. The dedicated GraviMob underwater gravity measurements were conducted in the Mediterranean Sea in March 2016, with a total of 26 underwater measurement profiles. All these measurement profiles were processed and validated. In a first step, the GraviMob gravity measurements were corrected for temperature based on a linear relationship between temperature and gravity differences. Through repeated profiles, we acquired GraviMob gravity measurements with an estimated error varying from 0.8 to 2.6 mGal with standard deviation after applying the proposed temperature correction. In a second step, the shipborne gravity data were downward continued to the measurement depth to validate the GraviMob measurements. Comparisons between the corrected GraviMob gravity anomalies and downward continued surface shipborne gravity data revealed a standard deviation varying from 0.8 to 3.2 mGal and a mean bias value varying from −0.6 to 0.6 mGal. These results highlight the great potential of the GraviMob system in measuring underwater gravity.
1 January 2016 in Géomorphologie : relief, processus, environnement
Les travaux conduits pendant 2 ans sur un tronçon du Loir (débit moyen de 24 m3/s, largeur moyenne de 40 m, profondeur moyenne de 2,5 m) et sur trois sites (Ruillé, Bruant, et Cherré), ont permis de déterminer les conditions de la dynamique fluviale pour ce cours d'eau de faible énergie, dont la pente du lit est inférieure à 1 ‰. Deux campagnes de mesure ont été effectuées entre 2013 et 2015 : mesure du recul des berges par LIDAR terrestre 3D et levés bathymétriques par échosondeur multi-faisceaux. La faiblesse de l’érosion a nécessité la mise au point d'une méthodologie adaptée (et transposable à d’autres systèmes fluviaux de faible énergie) pour le traitement et l’interprétation des résultats des mesures afin d’évaluer les modifications réelles intervenues d’une campagne de mesure à l’autre. Celles-ci sont ponctuelles, et les formes ainsi façonnées sont très variées. Les résultats principaux mis en évidence sont : (i) des reculs de berges de 0,80 m à 1,40 m intervenus localement en quelques mois, au cours de la saison de hautes eaux (sans crues de forte magnitude), (ii) de faibles modifications du fond du lit qui comprend par ailleurs entre les hauts fonds toujours submergés, des surcreusements (mouilles) de 1,5 à 1,8 m de profondeur. La charge solide mise en mouvement dans le chenal, majoritairement de texture fine (sables fins et limons), est évacuée vers l'aval. Des matériaux grossiers (galets de 5 à 9 cm de longueur), qui affleurent localement dans les berges, tapissent le fond du lit où ils forment un pavage. Cela oblige l’érosion, là où elle se manifeste, à se reporter sur les berges.