Ping Lu

Mr. Ping Lu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2021 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
PLPing Lu
Ping Lu
Dajun YuanDajun Yuan
Dajun Yuan
JCJian Chen
Jian Chen
Da Long JinDa Long Jin
Da Long Jin
JWJun Wu
Jun Wu
WLweiping LUO
weiping LUO
When shield tunneling in rock-soil interface (RSI) mixed ground, maintaining the stability of the tunnel face is very challenging. This study aims at the investigation of the face stability of slurry shield tunnels in RSI mixed ground. A new apparatus was developed to simulate pressurized slurry supporting the tunnel face in centrifuge tests. The progressive failure of the tunnel face was triggered with slow decrease of slurry pressure. With two equivalent model tunnels of circular shape and semicircular shape, the variations of soil (water) pressure and the displacement field in front of the tunnel can be obtained simultaneously. The face failure was found to be a local collapse in the upper soil layer. The limit support pressure was picked out at the sudden change of the measured soil or water pressures. Then the classical wedge-prism model was introduced and modified to calculate the limit support pressure for slurry shield tunnels in RSI mixed ground considering the partial collapse. Numerical analysis was applied to verify the theoretical analysis and sensitivity analysis was performed to estimate the influence of different parameters on the theoretical solutions.

24 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PLPing Lu
Ping Lu
Dajun YuanDajun Yuan
Dajun Yuan
WLweiping LUO
weiping LUO
Da Long JinDa Long Jin
Da Long Jin
MLMinggao Liu
Minggao Liu
To investigate the mechanical characteristics of shield tunnels when openings are made for the construction of cross passages, a series of centrifugal model tests were conducted. The segmental features of the shield tunnel were simulated in the tests, and the influence of different types of openings, namely, rectangular opening, small circular opening, and big circular opening was compared. External earth pressures, structural deformations, dislocations, and structural stresses were monitored during the tests, while the influence of different buried depths was also investigated. The results show that (1) soil arching effect occurred in the overlying soil due to the deformation of the tunnel, and the earth pressure reduction coefficients can guide the tunnel structural design; (2) vertical deformations of the main tunnel and the dislocations between adjacent rings increased with the opening sizes significantly; (3) significant stress concentration occurred close to the openings, and the compressive stress at the inner surface may even exceed the limit strength of the concrete. In summary, the adverse responses of the tunnel increased with the increase of the buried depth and the opening size. Targeted measures should be taken, such as temporary support, longitudinal connections, and high-strength materials near the openings.

7 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WLweiping LUO
weiping LUO
Dajun YuanDajun Yuan
Dajun Yuan
Da Long JinDa Long Jin
Da Long Jin
PLPing Lu
Ping Lu
JCJian Chen
Jian Chen
GYGongbiao Yang
Gongbiao Yang
To investigate the ground deformation induced by the variation of excess/insufficient support pressure in water-rich sandy soil, a series of centrifuge tests in tunnels located at cover over diameter (C/D) ratios equal to 0.5, 1.0 and 1.5 were carried out. The soil pressure, pore pressure, maximum surface displacement and the ground movement induced by reduced/increased support pressure were investigated. The results show that when the burial depth is large (≥1.5 D), the ground deformation caused by the support pressure is difficult to extend to the surface. When the burial depth is shallow (<1.5 D), the ground disturbance range induced by excess support pressure is approximately fishtail-shaped while it is approximately chimney-shaped induced by insufficient support pressure. For the former, the surface disturbance range can extend horizontally to about twice the buried depth beyond the front of the face and the maximum heave occurred at a distance of approximately buried depth beyond the front of the excavation face. For the latter, the surface disturbance range can extend horizontally to about buried depth beyond the front of the face which was larger than that in dry sandy soil. Based on the centrifuge test, the ground deformation mechanism was analyzed compared with previous studies and a supporting pressure control coefficient was proposed to conduct quantitative analysis of surface displacement induced by support pressure. Finally, the control of support pressure based on the surface displacement was discussed to provide some advice for practical engineering.

30 October 2026 in Infrastructures
Verified
Journal Article
Open access
PDF file
YZYazhou Zhang
Yazhou Zhang
XLXinggao Li
Xinggao Li
ZYZhanhu Yao
Zhanhu Yao
CZChao Zhang
Chao Zhang
YGYidong Guo
Yidong Guo
PLPing Lu
Ping Lu
As underground space development advances toward long-distance and high-water-pressure scenarios, underwater shield docking has become a key technical challenge. To control grouting-induced disturbance during underwater shield docking, this study develops a low-disturbance curtain grouting design and control framework for a large-diameter shield operating under high water pressure. Taking the Jiangyin–Jingjiang Yangtze River Tunnel as the engineering background and focusing on its alternating silty fine sand and silty clay strata, a comprehensive methodology integrating in situ grouting tests, large-scale physical grouting tests, three-dimensional numerical simulations, and on-site monitoring was employed. The study systematically reveals the diffusion law of grout pressure and the superposition mechanism of additional stress during grouting. Key findings include: (1) In sandy strata, the grouting pressure exhibits a significant influence range of 0–3 m, with a peak additional pressure of 1.0 MPa, showing an inverse relationship with diffusion distance. In clay strata, the peak pressure reaches 1.4 MPa with a dissipation cycle of approximately 6 days. (2) Continuous grouting produces a pronounced pressure superposition effect, which is substantially stronger in silty clay than in sandy strata; a skip-hole interval of ≥3 holes effectively mitigates pressure accumulation. (3) Stress concentration near the shield body is prominent, with the maximum additional stress reaching 1.0 MPa. Numerical simulations indicate a maximum shield displacement of 19.3 mm and a localized von Mises stress of 355 MPa, slightly exceeding the nominal yield strength of 345 MPa and indicating the onset of local yielding. This localized yielding identifies a critical stress control region of the shield body and highlights the necessity of limiting grouting-induced stress accumulation. Based on these insights, a graded grouting parameter control strategy is proposed to ensure deformation compliance with engineering requirements. Field monitoring during the grouting stage showed that the optimized strategy effectively limited grouting-induced pressure accumulation and structural response. After recalibration using the actual construction loading and structural boundary conditions, the numerical prediction at the critical shield waist monitoring location showed good agreement with the corresponding field measurement. These results support the feasibility of the proposed low-disturbance grouting framework under the investigated project conditions. This field application validates the feasibility and effectiveness of the proposed method under the geological and hydraulic conditions of the Jiangyin–Jingjiang Yangtze River Tunnel and provides a methodological reference for low-disturbance curtain grouting design in shield docking projects with comparable conditions. Further validation across different geological and hydraulic environments is required before the proposed parameters can be generalized.