We studied the laser-induced thermal damage on the surface of a single crystal silicon mirror illuminated by a mid-infrared intense laser. We used mid−infrared quasi-continuous wave lasers to irradiate the surface of the single−crystal silicon mirror. The power density of the irradiation process is 1 kW/cm² to 17 kW/cm², and the transient temperature field and thermal stress field under different laser fluxes were obtained. The simulation results show that we can calculate the thermal stress and temperature under laser irradiation. In addition, irradiance exceeding the corresponding breaking strength and melting point limit was obtained by the model. We can predict the irradiance that causes cracking and melting. There is little difference between experimental results and simulation results. On this basis, the thermal damage to the surface of the silicon wafer caused by continuous mid−infrared laser irradiation was studied.

Near-infrared imaging devices are extensively used in medical diagnosis, night vision, and security monitoring. However, existing traditional imaging devices rely on a bunch of refracting lenses, resulting in large, bulky imaging systems that restrict their broader utility. The emergence of flat meta-optics offers a potential solution to these limitations, but existing research on compact integrated devices based on near-infrared meta-optics is insufficient. In this study, we propose an integrated NIR imaging camera that utilizes large-size metalens with a silicon nanostructure with high transmission efficiency. Through the detection of target and animal and plant tissue samples, the ability to capture biological structures and their imaging performance was verified. Through further integration of the NIR imaging device, the device significantly reduces the size and weight of the system and optimizes the aperture to achieve excellent image brightness and contrast. Additionally, venous imaging of human skin shows the potential of the device for biomedical applications. This research has an important role in promoting the miniaturization and lightweight of near-infrared optical imaging devices, which is expected to be applied to medical testing and night vision imaging.

Three-dimensional (3D) plasmonic metamaterials have become a trend in the application of nanophotonic devices. In this paper, a convenient and inexpensive method for the design of 3D multilayer plasmonic metamaterials is constructed using a one-step self-shielded reactive-ion-etching process (OSRP) and a thermal evaporation system, which provides an efficient and low-cost method for the preparation of surface-enhanced Raman spectroscopy (SERS) substrates. The near-field enhancement of the 3D plasmonic metamaterials provides highly efficient electromagnetic resonance, and highly sensitive and uniform SERS sensing capabilities. The SERS detection results of rhodamine B (Rh. B) and rhodamine 6G (R6G) on this substrate show that the detection limit could reach 10^–13 mol/L, and the signal could give expression to excellent uniform stability. The results show that high sensitivity and high robustness SERS substrates can be prepared with high efficiency and low cost.