This paper uses a parametric study to evaluate the significance of the rotational components of Earth’s motion in a seismic design. The parametric study is based on the procedures included in Eurocode 8, Part 6. Although the answer to the question of when the effects of rotational components are important is quite a complex one and requires a more in-depth study, our aim was to try to assess this question in a relatively quick manner and with acceptable accuracy. The first part of the paper is devoted to derivation of a simple formula that can be used for expressing the importance of rotational components in comparison with the classic seismic design without their usage. The quasi-static analysis, assuming inertial forces, is used. A crucial role plays the shape of the fundamental mode of the vibration. Due to simplicity reasons, well-known expression for estimation of the first eigenmode as an exponential function with different power coefficients that vary for different types of buildings is used. The possibility of changing the soil parameters is subsequently included into the formula for estimation of the fundamental frequency of tall buildings. In the next part, the overall seismic analyses of complex FEM models of 3D buildings and chimneys are performed. The results from those analyses are then compared with those from simplified calculations. The importance of the soil characteristics for determination of whether it is necessary to take into account the rotational effects is further discussed.
1 September 2013 in Slovak Journal of Civil Engineering
The implementation of the Eurocodes in current structural design practice has brought about a new emphasis on the design of earthquake-resistant structures. In some European countries, new earthquake zones have been defined; henceforth, the design requirements of many ongoing projects have changed as well. The choice of the ductility class of steel structures as one of the key design parameters, the consequences of this choice on design procedure, and some applications of the Eurocode 8 design criteria by comparing French and Slovak national practice are discussed, using a practical example of a structure.
1 March 2026 in Civil and Environmental Engineering
Fatigue cracks have been identified in key structural details of the orthotropic deck on the SNP Bridge - the bridge with the longest span in Slovakia – crossing the Danube River in Bratislava. These cracks were observed at welds connecting the closed stiffeners to the deck plate, the discontinuous stiffeners to the crossbeam web, and at the stiffener splices. This paper evaluates one of these critical fatigue-prone details (stiffener to deck plate) using various fatigue assessment methods outlined in the draft of the forthcoming EN 1993-1-9 standard on fatigue. The nominal stress, hot-spot stress, and effective notch stress approaches were applied for verification. The traffic loading history over the bridge’s service life was approximated using current traffic data, primarily municipal bus transport. Fatigue life estimates derived from the three design approaches are presented and compared, with an in-depth discussion of the differences and implications for fatigue assessment and design.
1 March 2026 in Civil and Environmental Engineering
Fatigue cracking is a common issue in steel orthotropic bridge decks subjected to long-term dynamic loading. When repairs are required, especially by welding, it is typically necessary to close the bridge to traffic to ensure proper weld quality. However, bridge closures can lead to significant societal and economic impacts, including traffic congestion, long detours, increased emissions, and loss of time. Therefore, the ability to carry out repair welding without full traffic closure is of considerable interest for infrastructure operators and public authorities. The first essential step in enabling such in-service repair is to assess the dynamic behaviour of existing fatigue cracks under traffic loads. Specifically, it is crucial to monitor the crack flank movements to determine whether they remain within acceptable limits during ongoing traffic, thereby permitting welding without compromising the repair quality. This paper presents the development and deployment of a specialized monitoring system designed to measure crack flank displacements in real time. Crack flank movement amplitudes and frequency responses were recorded and analysed. Measured data were compared with results from similar monitoring campaigns conducted in other countries.