The paper presents some of the intermediate results obtained in the framework of the research program APVV No. 0236-12 granted by the Slovak Research and Development Agency entitled “Bridge Structural Health Monitoring via Repeated Dynamic Tests”.The paper describes initial structural health monitoring (SHM) tests of the Port Bridge and of the Slovak National Uprising Bridge across the Danube River in Bratislava, Slovakia. The first one is a highway and railway continuous steel truss bridge with 4 spans and a total length of 460.8 meters (largest span 240.8 m). The second one is an asymmetric cable-stayed steel bridge with an orthotropic 2-box beam supported in one plane by cables from an inclined pylon. The total length is 431.8 meters (largest span 303 m). The paper is aimed at different topics: the description of the test setups, the measuring accelerometer polygons synchronized by Wi-Fi connection, synchronization of the video footage with the measurements, etc. Some natural frequencies and mode shapes have been identified from the operational modal analyses
This paper uses a parametric study to evaluate the significance of the rotational components of Earth’s motion in a seismic design. The parametric study is based on the procedures included in Eurocode 8, Part 6. Although the answer to the question of when the effects of rotational components are important is quite a complex one and requires a more in-depth study, our aim was to try to assess this question in a relatively quick manner and with acceptable accuracy. The first part of the paper is devoted to derivation of a simple formula that can be used for expressing the importance of rotational components in comparison with the classic seismic design without their usage. The quasi-static analysis, assuming inertial forces, is used. A crucial role plays the shape of the fundamental mode of the vibration. Due to simplicity reasons, well-known expression for estimation of the first eigenmode as an exponential function with different power coefficients that vary for different types of buildings is used. The possibility of changing the soil parameters is subsequently included into the formula for estimation of the fundamental frequency of tall buildings. In the next part, the overall seismic analyses of complex FEM models of 3D buildings and chimneys are performed. The results from those analyses are then compared with those from simplified calculations. The importance of the soil characteristics for determination of whether it is necessary to take into account the rotational effects is further discussed.
The article presents the development of a SHM (Structural Health Monitoring) strategy intended to confirm the improvement of the load-bearing capacity of a bridge over the Ružín Dam using static and dynamic load tests, as well as numerical simulations. The paper comprises measurements of the global response of the bridge to prepare a verified and validated FEM (Finite Element Method) model. A complex measuring system used for the tests consisted of two main parts: an interferometric IBIS-S (Image by Interferometric Survey-Structures) radar and a multichannel vibration and strain data logger. Next, structure–vehicle interactions were modelled, and non-linear numerical dynamic analyses were performed. As a result, the time histories of displacements of the structure from traffic effects were obtained. Their comparison with IBIS-S radar records proves that this method can be effectively used for assessing bridges subjected to common traffic loads. The results (measured accelerations) obtained by local tests in external pre-stressed cables are presented and a convenient method for acquiring the axial force in the cables is proposed.
1 November 2021 in Journal of Building Engineering
This paper presents a method to determine soil stiffness properties using measured structural modes of bridges. Normally, the identified mode shapes have to be smoothed. The mode shapes are approximated using functions describing the transverse vibration of distributed–parameter systems. Artificial coefficients are introduced into this solution in order to sum up the error contributions of displacements and its derivatives up to second order. Then, a pier-soil model based on normalized mechanical impedance functions is used. Applying this method along with more than one vertical mode shape leads to acceptable and more accurate results. The amplitudes of pier bottom vibrations are chosen as the suitable weights for the averaging procedure. For the Warth Bridge situated near Vienna, shear wave velocities and shear moduli at the pier foundations have been estimated. The results correspond quite well to the geological investigation.