This paper uses a parametric study to evaluate the significance of the rotational components of Earth’s motion in a seismic design. The parametric study is based on the procedures included in Eurocode 8, Part 6. Although the answer to the question of when the effects of rotational components are important is quite a complex one and requires a more in-depth study, our aim was to try to assess this question in a relatively quick manner and with acceptable accuracy. The first part of the paper is devoted to derivation of a simple formula that can be used for expressing the importance of rotational components in comparison with the classic seismic design without their usage. The quasi-static analysis, assuming inertial forces, is used. A crucial role plays the shape of the fundamental mode of the vibration. Due to simplicity reasons, well-known expression for estimation of the first eigenmode as an exponential function with different power coefficients that vary for different types of buildings is used. The possibility of changing the soil parameters is subsequently included into the formula for estimation of the fundamental frequency of tall buildings. In the next part, the overall seismic analyses of complex FEM models of 3D buildings and chimneys are performed. The results from those analyses are then compared with those from simplified calculations. The importance of the soil characteristics for determination of whether it is necessary to take into account the rotational effects is further discussed.
The article presents the development of a SHM (Structural Health Monitoring) strategy intended to confirm the improvement of the load-bearing capacity of a bridge over the Ružín Dam using static and dynamic load tests, as well as numerical simulations. The paper comprises measurements of the global response of the bridge to prepare a verified and validated FEM (Finite Element Method) model. A complex measuring system used for the tests consisted of two main parts: an interferometric IBIS-S (Image by Interferometric Survey-Structures) radar and a multichannel vibration and strain data logger. Next, structure–vehicle interactions were modelled, and non-linear numerical dynamic analyses were performed. As a result, the time histories of displacements of the structure from traffic effects were obtained. Their comparison with IBIS-S radar records proves that this method can be effectively used for assessing bridges subjected to common traffic loads. The results (measured accelerations) obtained by local tests in external pre-stressed cables are presented and a convenient method for acquiring the axial force in the cables is proposed.
29 September 2025 in Neural Computing and Applications
The early detection of structural damage is of paramount importance for the maintenance and prolongation of the service life of existing bridges. The identification of structural damage is typically conducted using nondestructive vibration experiments in conjunction with a mathematical technique known as model updating. This paper presents the application of two distinct model updating methodologies. The first method employs a metaheuristic optimization technique with nested multilevel sampling to efficiently explore the design parameter space. The second method frames model updating as an inverse problem and employs a machine learning-based surrogate model to approximate the inverse relationship between the structural response and the structural parameters. Based on the analysis of both approaches, a new method is proposed that combines the advantages of both methods in a novel way. The method employs iterative targeting and design space reduction, in conjunction with the use of an artificial neural network, to approximate the inverse design space as accurately as possible. This is achieved by sequential training the network on the optimal data set. This procedure significantly accelerates the convergence of the optimization process and improves the accuracy of the obtained solution. All methods are applied to the damage identification of three structures: single-span and two-span steel plate girders and a riveted truss bridge. The ability to detect damage in varying locations and over different scales is assessed. The results obtained are compared in terms of the convergence speed and the accuracy of the solutions obtained. Additionally, different settings of methods varying in the number of simulations, levels and the parameter controlling the convergence rate are also studied. In all the tested cases, the superiority of the newly proposed method in terms of accuracy and computational requirements has been confirmed. The new method, while maintaining the same number of simulations, on average increases the accuracy of the obtained results by a factor of 30. It also identifies damage with equal or better accuracy at one-tenth the number of simulations than other tested methods.