In this brief, obtained results of the electrothermal analysis of multifinger power high-electron mobility transistors (HEMTs) are presented. The analysis of thermal and electrical behavior is supported by effective 3-D electrothermal device simulation method developed for Synopsys TCAD Sentaurus environment using mixed-mode setup. The effects of multifinger HEMT structure metallization layout design are described and studied. Simulation results depict the significant effect of metallization geometry on the electrothermal properties and behavior of the power multifinger HEMTs.
In this paper, several methods suitable for real time on-chip temperature measurements of power AlGaN/GaN-based high-electron mobility transistor (HEMT) grown on a SiC substrate are presented. The measurement of temperature distribution on HEMT surface using Raman spectroscopy is presented. The second approach utilizes electrical I–V characteristics of the Schottky diode neighboring to the heat source of the active transistor under different dissipated power for temperature measurement. These methods are further verified by measurements with microthermistors. The features and limitations of the proposed methods are discussed. The thermal parameters of materials used in the device are extracted from the temperature distribution in the structure with the support of three-dimensional thermal simulation of the device. Thermal analysis of the multifinger power HEMT is performed. The effects of the structure design and fabrication processes from semiconductor layers, metallization, and packaging up to cooling solutions are investigated. The influence of individual layer properties on the thermal performance of different HEMT structures under different operating conditions is presented. The results show that the proposed experimental methods supported by simulation have a potential for the design, analysis, and thermal management of HEMT.
Silicon carbide (SiC) has been envisioned as an almost ideal material for power electronic devices; however, device reliability is still a great challenge. Here we investigate the reliability of commercial 1.2-kV 4H-SiC MOSFETs under repetitive unclamped inductive switching (UIS). The stress invoked degradation of the device characteristics, including the output and transfer characteristics, drain leakage current, and capacitance characteristics. Besides the shift of steady-state electrical characteristics, a significant change in switching times points out the charge trapping phenomenon. Transient capacitance spectroscopy was applied to investigate charge traps in the virgin device as well as after UIS stress. The intrinsic traps due to metal impurities or transitions were recognized in the virgin device. The UIS stress caused suppression of the second stage of the transition, and only the first stage, , was observed. Hence, the UIS stress is causing the reduction of multiple charging of carbon vacancies in SiC-based devices.