Silicon carbide (SiC) has been envisioned as an almost ideal material for power electronic devices; however, device reliability is still a great challenge. Here we investigate the reliability of commercial 1.2-kV 4H-SiC MOSFETs under repetitive unclamped inductive switching (UIS). The stress invoked degradation of the device characteristics, including the output and transfer characteristics, drain leakage current, and capacitance characteristics. Besides the shift of steady-state electrical characteristics, a significant change in switching times points out the charge trapping phenomenon. Transient capacitance spectroscopy was applied to investigate charge traps in the virgin device as well as after UIS stress. The intrinsic traps due to metal impurities or transitions were recognized in the virgin device. The UIS stress caused suppression of the second stage of the transition, and only the first stage, , was observed. Hence, the UIS stress is causing the reduction of multiple charging of carbon vacancies in SiC-based devices.
30 April 2018 in IEEE Transactions on Electron Devices
In this brief, the monolithic integration of enhancement (E)-mode and depletion (D)-mode InAlN/GaN high-electron mobility transistors (HEMTs) is presented. The aim of this brief is to show the results of the designed NAND logic cell, which consists of both HEMTs integrated onto a single die. Large-signal models of dual-gate E-mode and D-mode HEMTs are proposed and calibrated by experimental results. We present well-calibrated electrophysical models for 2-D device simulations employing mixed-mode setup in Synopsys TCAD Sentaurus device. The mixed-mode approach interconnects dual-gate E-HEMT and D-HEMT to NAND logic cell circuit, which allows analysis and characterization of the device as the complex system. Good agreement between simulations and experimental results confirms the validity of the proposed models and simulation methodology.
Transient spectroscopies are sensitive to charge carriers released from trapping centres in semiconducting devices. Even though these spectroscopies are mostly applied to reveal defects causing states that are localised in the energy gap, these methods also sense-charge from quantum wells in heterostructures. However, proper evaluation of material response to external stimuli requires knowledge of material properties such as electron effective mass in complex structures. Here we propose a method for precise evaluation of effective mass in quantum well heterostructures. The infinite well model is successfully applied to the InGaAsN/GaAs quantum well structure and used to evaluate electron effective mass in the conduction and valence bands. The effective mass m/m0 of charges from the conduction band was 0.093 ± 0.006, while the charges from the valence band exhibited an effective mass of 0.122 ± 0.018.