The germination and growth of melon (Cucumis melo L.) plants can be severely affected by excess salts in the soil or irrigation water; however, negative effects of salt stress can be attenuated using appropriate methods of seed priming. Thus, effects of osmopriming as inducer of salt stress tolerance in melon seeds exposed to salinity levels were investigated in this study. Seeds were soaked for 22 h at 25 °C in the dark in distilled water (hydropriming) or 0.5% KNO3 solution (osmopriming), and after drying, were distributed in plastic boxes with blotter paper containing different NaCl solutions prepared with osmotic pressure of 0.0 MPa (control), -0.3 MPa (mild stress), and -0.6 MPa (severe stress). Unprimed dry seeds were taken as control. The plastic boxes were kept into a seed germinator, at 25 °C for 14 days. A completely randomized design in a 3 × 3 factorial schemes with four replicates of 25 seeds was used. Results showed that the seed priming with water and KNO3 may be successfully applied on melon seeds to alleviate the adverse effects of saline stress in initial stages of plant growth. However, under severe salt stress conditions, hydropriming should be used because it results in higher germination and initial growth rate of the seedlings when compared to the osmopriming. Use of unprimed seeds should not be adopted in cultivation areas affected by salinity because they result in low germination rate and reduced initial plant growth.
The development of technologies to increase stand establishment efficiency and seed vigor, as well as to maximize profits, is of fundamental importance for the sustainability of agriculture. Products based on humic substances, such as humic acids, have been recently used in Brazilian agriculture to produce seedlings with high vigor, which positively influences the establishment of the initial stand. Thus, this study aimed to evaluate the effect of treatment of corn seeds with a commercial humic acid-based product, Humykos® (18% of humic acid content), on germination and seedling vigor. The treatments consisted of six doses (0, 100, 200, 300, 400, and 500 mL 100 kg-1 seed) of Humykos®, and the treated seeds were analyzed for germination and vigor (first count, emergence, emergence speed index, length, and dry mass of shoots and roots). Our results show that humic acid promotes greater seedling growth and increased shoot dry mass in corn; in addition, it has a positive influence on the emergence speed index up to a dose 158 mL 100 kg -1 seeds.
The aim of the present study was to evaluate the effects of temperature, substrate, and luminosity on chia seeds in order to determine adequate conditions for a germination test. The experiment consisted of a completely randomized design, in a 4 × 5 × 2 factorial scheme (four substrates × five temperatures × two luminosity conditions), with four replications. The following variables were analyzed: first germination count, germination, germination speed index, and mean germination time. Germination was best at 15, 20, 25, and 30 °C for the on-paper, paper roll, and sand substrates. However, in the presence of luminosity and at 25 °C, the on-paper substrate had the highest mean. For all substrates, the lowest germination was achieved at 35 °C, proving that high temperatures reduce chia seed germination. Germination speed index was highest at 25 and 30 °C for on-paper, paper roll, and sand substrates, in both the presence and absence of luminosity. Chia seeds are considered to be neutral photoblasts. Germination tests should be performed with the on-paper substrate, at 25 °C, and with a duration of seven days. The first count should be carried out four days after establishment of the test.
22 June 2021 in ACS Agricultural Science & Technology
The use of desiccants may result in seeds with high physiological and sanitary quality due to the shorter period of exposure to field adverse conditions before the maturity stage for harvest. This study evaluated the effect of chemical desiccants and harvest times on the physiological and sanitary quality of soybean seeds. The experiment consisted of a randomized block design, arranged in a factorial scheme (4 × 3) + 1, with four replications. The first factor corresponded to four desiccation (grammoxone-2 L ha-1, glufosinate-2 L ha-1, reglone-1.5 L ha-1, and saflufenacil-40 g ha-1) applied at the R7.1 phenological stage (physiological maturity and 65% moisture with three harvest times (0, 7, and 14 days after the R8 phenological stage) and additional treatment (control, application of water only, and harvest at the R8 stage), with four replications. The use of the grammoxone desiccant and seeds harvested at seven days after the R8 stage resulted in soybean seeds of the highest physiological quality, as observed for the variables germination, moisture damage, mechanical damage, and incidences of Colletotrichum sp., Phomopsis sp., Penicillium sp. Fusarium sp., Cercospora kikuchii, and Alternaria sp. Seeds harvested at the R8 + 14 stage had the greatest losses in seed quality. The use of ammonium glufosinate and saflufenacil as desiccants is not recommended due to the reduction in the physiological quality of soybean seeds.
Laser-induced breakdown spectroscopy (LIBS) associated with machine learning algorithms (ML) was used to evaluate the Brachiaria seed physiological quality by discriminating the high and low vigor seeds. A 23 factorial design was used to optimize the LIBS experimental parameters for spectral analysis. A total of 120 samples from two distinct cultivars of Brachiaria brizantha seeds exhibiting high vigor (HV) and low vigor (LV) in standard tests were studied. The raw LIBS spectra were normalized and submitted to outlier verification, previously to the reduction data dimensionality from principal component analysis. Supervised machine learning algorithm parameters were chosen by leave-one-out cross-validation in the test samples, and it was tested by external validation using a new set of data. The overall accuracy in external validation achieved 100% for HV and LV discrimination, regardless of the cultivar or the classification algorithm.