Jamiluddin Jaafar

Dr. Jamiluddin Jaafar

Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2019 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
JJJamiluddin Jaafar
Jamiluddin Jaafar
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
CTCionita Tezara
Cionita Tezara
MHMohammad Hazim Mohamad Hamdan
Mohammad Hazim Mohamad Hamdan
TRTeuku Rihayat
Teuku Rihayat

31 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
CTC. Tezara
C. Tezara
AHA.E. Hadi
A.E. Hadi
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
ZMZalinawati Muhamad
Zalinawati Muhamad
MHM.H.M Hamdan
M.H.M Hamdan
DFD.F. Fitriyana
D.F. Fitriyana
Recently, the most critical issue related to the use of natural fibre-reinforced polymer composites (NFRPC) is the degradation properties of composites exposed to the environment. NFRPC’s moisture absorption behaviour has adverse effects on the composite’s mechanical properties and dimensional stability. The purpose of this study is to analyse the mechanical properties of epoxy composites reinforced by jute–ramie hybridisation. This study also analysed the effect of stacking sequence hybridisation of the jute–ramie composite on water absorption behaviour. A five-layer different type of stacking sequence of single and hybrid jute–ramie is produced with the hand lay-up method. The results obtained from this study found that the mechanical properties and water absorption behaviour of a single jute fibre are lower compared to a single ramie fibre. The hybrid of jute–ramie has been able to increase the performance of composite compared to pure jute composites. The mechanical properties of the hybrid jute–ramie composite show a reduction effect after exposure to an aqueous environment due to the breakdown of fibre matrix interfacial bonding. However, after 28 days of immersion, all types of the stacking sequence’s mechanical properties are still higher than that of pure epoxy resin. In conclusion, the appropriate sequence of stacking and selecting the material used are two factors that predominantly affect the mechanical properties and water absorption behaviour. The hybrid composites with the desired and preferable properties can be manufactured using a hand-lay-up technique and used in the various industrial applications.

28 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
CTC. Tezara
C. Tezara
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
LWLing Shing Wong
Ling Shing Wong
WCWan Hee Cheng
Wan Hee Cheng
DFD.F. Fitriyana
D.F. Fitriyana
AHA.E. Hadi
A.E. Hadi
The manufacturing of materials, in conjunction with green technology, emphasises the need to employ renewable resources to ensure long-term sustainability. Re-exploring renewable elements that can be employed as reinforcing materials in polymer composites has been a major endeavour. The research goal is to determine how well palm kernel cake filler (PKCF) performs in reinforced epoxy composites. In this study, PKCF with 100 mesh was mixed with epoxy resin (ER) in various ratios ranging from 10% to 40% by weight. Hand lay-up with an open mould is proposed as a method for fabricating the specimen test. Surface modification of PKCF with varying concentrations of NaOH (5 wt.% and 10 wt.%) will be contrasted with the untreated samples. Using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), the effect of alkaline treatment will be examined. The tensile and maximum flexural strength of the untreated PKCF/ER composite were determined in this work, with a 30 wt.% of PKCF having the highest tensile strength of 31.20 MPa and the highest flexural strength of 39.70 MPa. The tensile and flexural strength were reduced to 22.90 MPa and 30.50 MPa, respectively, when the filler loading was raised to 40 wt.%. A 5 wt.% alkali treatment for 1 h improved the composites’ mechanical characteristics. Lastly, an alkali treatment can aid in the resolution of the problem of inadequate matrix and filler interaction. Alkaline treatment is a popular and effective method for reducing the hydroxyl group in fillers and, thus, improving interfacial bonding. Overall, palm kernel cake is a promising material used as a filler in polymer composites.

5 July 2018 in BioResources
Verified
Journal Article
Closed access
JJJamiluddin Jaafar
Jamiluddin Jaafar
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
AOAhmed N. Oumer
Ahmed N. Oumer
MHMohammad Hazim Hamdan
Mohammad Hazim Hamdan
CTCionita Tezara
Cionita Tezara
MSMohd Sapuan Salit
Mohd Sapuan Salit
The performance of short pineapple leaf fiber (PALF) reinforced tapioca biopolymer (TBP) composites were investigated, specifically the effect of fiber length and fiber composition on mechanical properties (tensile properties, flexural strength, and impact strength). Composite samples with different fiber lengths (< 0.50 mm, 0.51 mm to 1.00 mm, and 1.01 mm to 2.00 mm) and different fiber compositions (10%, 20%, 30%, and 40%) were prepared through crushing, sieving, internal mixing, compression molding, and machining processes. The combination of PALF and TBP enhanced the mechanical properties of composites with 30% as the optimum fiber content. However, the influence of different fiber lengths up to 2.00 mm provided no significant effect on producing maximum tensile properties. Good interfacial adhesion between PALF and TBP was evident from scanning electron microscopy analysis. Therefore, the combination of PALF and TBP has great potential as a renewable and biodegradable polymer. Moreover, PALF-TBP composites are expected to become alternatives to petroleum-based polymers.

19 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
AIA.P. Irawan
A.P. Irawan
PAPaula Tjatoerwidya Anggarina
Paula Tjatoerwidya Anggarina
DUDidi Widya Utama
Didi Widya Utama
NNNajid Najid
Najid Najid
M AbdullahM Abdullah
M Abdullah
TRTeuku Rihayat
Teuku Rihayat
The investigation of hybrid, woven, natural fiber-reinforced polymer composites as a substitute reinforcement for fiber polymer composites has recently caught the interest of academics, industry, and researchers. Woven, natural fiber composites have been implemented in many different applications, including parts for automobiles, household items, flooring, aerospace, and ballistic materials. Therefore, this research seeks to establish the thermal and mechanical characteristics of composites made from rattan strips (RS) and glass fiber (GF)-reinforced epoxy resin (ER). Other than that, the impact of layering configurations with respect to the thermal and mechanical characteristics of the RS and GF will be determined. Hand lay-up and a hydraulic press machine produce hybrid, woven RS and GF laminates. The hybrid composite’s mechanical properties will be investigated using impact, tensile, and flexural tests. The hybrid woven of the GF/RS/RS/RS/GF composite sequence demonstrated the highest mechanical properties in comparison to other sequences. The increase from one to three layers of RS in the core layer of GF hybrid composites enhanced the flexural, impact, and tensile properties. In addition, the hybridization of rattan and GF is more thermally stable, as recorded by the high decomposition temperature. As a finding of the research, the woven RS and GF hybrid is a potential material for automotive applications such as car bumpers, for example.

7 November 2024 in Mechanical Engineering for Society and Industry
Verified
Journal Article
Open access
PDF file
AIAl Ichlas Imran
Al Ichlas Imran
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
TCTezara Cionita
Tezara Cionita
AHAgung Efriyo Hadi
Agung Efriyo Hadi
Muji SetiyoMuji Setiyo
Muji Setiyo
RDRozanna Dewi
Rozanna Dewi
Derived from Coir coconut waste, coir fiber offers an environmentally friendly response to ecological challenges in various industries. Its application aligns with achieving Sustainable Development Goals (SDGs), such as eliminating extreme poverty, ensuring food security, and promoting decent employment and economic expansion. It also fosters environmentally friendly consumption and production, mitigates global warming, and conserves biodiversity. The study involves a comprehensive review of current literature, examining the methodologies including extraction techniques, surface modifications, and manufacturing processes like hand layup, casting, compression molding, hot pressing, and injection molding. The analysis identifies key improvements in mechanical, thermal, and physical properties of coir fiber composites, particularly enhanced tensile strength, thermal stability, and reduced water absorption due to chemical treatments. This confirms previous findings and contributes toward enhancing our understanding that coir fiber is extensively utilized in multiple industries, including housing, construction, transportation, biomedical, wrapping, electrical power, communication technology, biofuel, and bioenergy due to their natural abundance, affordability, ease of shaping, superior durability, and eco-friendly characteristics. Another crucial practical implication is that coir fiber and its composites offer numerous advantages that have significant consequences for the development of coir fiber in various fields.