The hydrophobic azo dye 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR, H2L) was studied as part of a system for the centrifuge-less cloud point extraction (CL-CPE) and spectrophotometric determination of traces of cobalt. The extracted 1:2 (Co:HTAR) complex, [CoIII(HL−)(L2−)]0, shows an absorption maximum at 553 nm and contains HTAR in two different acid–base forms. Optimum conditions for its formation and CL-CPE were found as follows: 1 × 10−5 mol L−1 of HTAR, 1.64% of Triton X-114, pH of 7.8, incubation time of 20 min at ca. 50 °C, and cooling time of 30 min at ca. −20 °C. The linear range, limit of detection, and apparent molar absorptivity coefficient were 5.4–189 ng mL−1, 1.64 ng mL−1, and 2.63 × 105 L mol−1 cm−1, respectively. The developed procedure does not use any organic solvents and can be described as simple, cheap, sensitive, convenient, and environmentally friendly. It was successfully applied to the analysis of artificial mixtures and real samples, such as steel, dental alloy, rainwater, ampoules of vitamin B12, and saline solution for intravenous infusion.
Two new vanadium (V) complexes involving 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR) and tetrazolium cation were studied. The following commercially available tetrazolium salts were used as the cation source: tetrazolium red (2,3,5-triphenyltetrazol-2-ium;chloride, TTC) and neotetrazolium chloride (2-[4-[4-(3,5-diphenyltetrazol-2-ium-2-yl)phenyl]phenyl]-3,5-diphenyltetrazol-2-ium;dichloride, NTC). The cations (abbreviated as TT+ and NTC+) impart high hydrophobicity to the ternary complexes, allowing vanadium to be easily extracted and preconcentrated in one step. The complexes have different stoichiometry. The V(V)–HTAR–TTC complex dimerizes in the organic phase (chloroform) and can be represented by the formula [(TT+)[VO2(HTAR)]]2. The other complex is monomeric (NTC+)[VO2(HTAR)]. The cation has a +1 charge because one of the two chloride ions remains undissociated: NTC+ = (NT2+Cl−)+. The ground-state equilibrium geometries of the constituent cations and final complexes were optimized at the B3LYP and HF levels of theory. The dimer [(TT+)[VO2(HTAR)]]2 is more suitable for practical applications due to its better extraction characteristics and wider pH interval of formation and extraction. It was used for cheap and reliable extraction–spectrophotometric determination of V(V) traces in real samples. The absorption maximum, molar absorptivity coefficient, limit of detection, and linear working range were 549 nm, 5.2 × 104 L mol−1 cm−1, 4.6 ng mL−1, and 0.015–2.0 μg mL−1, respectively.
1 January 2015 in Journal of the Serbian Chemical Society
The formation and liquid-liquid extraction of ion-association complexes between Co(II)-4-(2-Pyridylazo)resorcinol (PAR) anionic chelates and cations of three ditetrazolium chlorides were studied: Blue Tetrazolium chloride (BTC), Neotetrazolium chloride (NTC) and Nitro Blue Tetrazolium chloride (NBT). The optimum conditions for the formation and solvent extraction of the ion-association comlpex chelates were determined. It has been found that in the systems of Co(II)-PAR-DTS, the reactants are reacted in molar ratios 1:2:1 and the general formula of complexes was suggested. The extraction equilibria were investigated and quantitatively characterized by the equilibrium constants and the recovery factors. The analytical characteristics of the complexes were calculated.
The formation and liquid-liquid extraction of a yellow ternary complex of vanadium(V) with 4-nitrocatechol (NC) and the ion-pair reagent Thiazolyl Blue Tetrazolium ⨑ub;3-(4,5-dimethyl-2-thiazol)-2,5diphenyltetrazolium bromide, MTT⫂ub; with 1: 2: 3 stoichiometry (V: NC: MTT) was studied. The optimum extraction conditions (pH, concentration of the reagents, extraction time), spectrophotometric parameters of the extract and key constants (extraction constant, association constant, distribution constant) were determined. Beer’s law was obeyed for concentrations ranging from 0.12 to 1.2 µg/mL of vanadium(V) with a molar absorptivity of ɛ = 3.13 × 104 L/mol cm at λmax = 400 nm. The effect of diverse ions was studied and extraction-spectrophotometric procedures for determination of vanadium in catalysts and steels were proposed.
The formation and liquid-liquid extraction of ion-association complex between gallium(III) − 4-(2-pyridylazo)-resorcinol (PAR) – 1,4-diphenyl-3-(phenylamino)-1H-1,2,4-triazole (nitron, Nt), water and chloroform were studied. The optimum conditions for gallium(III) extraction as an ion-association complex, (NtH)+[Ga3+(PAR)2]-, were found: pH, concentration of the reagents and shaking time. The following key constants were calculated: constant of extraction (logKex = 6.28 ± 0.07), constant of association (logβ = 4.98 ± 0.05), constant of distribution (logKD = 1.30 ± 0.02) and recovery factor (R / % = 95.17 ± 0.02). Beerʼs law is obeyed for Ga(III) concentration up to 0.8 μg cm-3 with apparent molar absorptivity of (10.3 ± 0.4)×104 dm-3 mol-1 cm-1 at λmax = 510 nm. Some additional characteristics, such as limit of detection (LOD = 0.072 μg cm-3), limit of quantification (LOQ = 0.24 μg cm-3) and Sandellʼs sensitivity (SS = 0.000675 ng cm-2) were estimated as well
14 December 2021 in Russian Journal of Inorganic Chemistry
Complex formation and liquid-liquid extraction were examined in a system containing vanadium(V), 4-nitrocatechol (4NC), xylometazoline hydrochloride (XMH), water, and chloroform. Using a combination of experiment and calculations at the B3LYP/6-311G level of theory, it has been shown that vanadium(V) retains its initial oxidation state when the 4NC concentration is low. The extracted vanadium(V) ion-association complex has a composition of 1 : 2 : 1 (V : 4NC : XMH) and consists of a colorless xylometazolinium cation (XMH+) and a yellow anionic chelate, which can be represented by the formula [VVO(4NC2–)2]–. With a large excess of 4NC, spectral changes occur, indicating that vanadium(V) is reduced to vanadium(IV). Under optimal conditions (pH 5, extraction time t = 3 min, and c4NC = cXMH = 6.5 × 10–4 mol dm–3), the spectrum of the extracted species is characterized by a main absorption maximum at 399–400 nm and an additional low-intensity band at 640–710 nm. The distribution ratio, fraction extracted, molar absorptivity coefficient, and linear range were determined for these optimal conditions.