The hydrophobic azo dye 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR, H2L) was studied as part of a system for the centrifuge-less cloud point extraction (CL-CPE) and spectrophotometric determination of traces of cobalt. The extracted 1:2 (Co:HTAR) complex, [CoIII(HL−)(L2−)]0, shows an absorption maximum at 553 nm and contains HTAR in two different acid–base forms. Optimum conditions for its formation and CL-CPE were found as follows: 1 × 10−5 mol L−1 of HTAR, 1.64% of Triton X-114, pH of 7.8, incubation time of 20 min at ca. 50 °C, and cooling time of 30 min at ca. −20 °C. The linear range, limit of detection, and apparent molar absorptivity coefficient were 5.4–189 ng mL−1, 1.64 ng mL−1, and 2.63 × 105 L mol−1 cm−1, respectively. The developed procedure does not use any organic solvents and can be described as simple, cheap, sensitive, convenient, and environmentally friendly. It was successfully applied to the analysis of artificial mixtures and real samples, such as steel, dental alloy, rainwater, ampoules of vitamin B12, and saline solution for intravenous infusion.
A new liquid—liquid extraction system for molybdenum(VI) was studied. It contains 4-nitrocatechol (4NC) as a complexing chromogenic reagent and benzalkonium chloride (BZC) as a source of heavy cations (BZ+), which are prone to form chloroform-extractable ion-association complexes. The optimum conditions for the determination of trace molybdenum(VI) were found: concentrations of 4NC and BZC (7.5 × 10−4 mol dm−3 and 1.9 × 10−4 mol dm−3, respectively), acidity (3.75 × 10−2 mol dm−3 H2SO4), extraction time (3 min), and wavelength (439 nm). The molar absorptivity, limit of detection, and linear working range were 5.5 × 104 dm3 mol−1 cm−1, 5.6 ng cm−3, and 18.6–3100 μg cm−3, respectively. The effect of foreign ions was examined, and the developed procedure was applied to the analysis of synthetic mixtures and real samples (potable waters and steels). The composition of the extracted complex was 1:1:2 (Mo:4NC:BZ). Three possible structures of its anionic part [MoVI(4NC)O2(OH)2]2− were discussed based on optimizations at the B3LYP/3-21G level of theory, and simulated UV/Vis absorption spectra were obtained with the TD Hamiltonian.
Introduction: Adipose tissue is immunologically and hormonally active, and these effects are mediated largely by adipocytokines. Thyroid hormones regulate metabolism and organ function, and Hashimoto’s thyroiditis (HT) is the most common autoimmune disease affecting thyroid function. Aim: To evaluate the levels of the adipocytokines leptin and adiponectin in patients with autoimmune HT, and to perform a comparative intragroup analysis in patients with different stages of gland functional activity, and in a control group. Materials and methods: Ninety-five patients with HT and 21 healthy controls were enrolled in the study. Venous blood was taken without anticoagulants after at least 12 hours of fasting, and serum samples were frozen at −70°C until analysis. Serum levels of leptin and adiponectin were determined by an enzyme-linked immunosorbent assay (ELISA). Results: Serum levels of leptin in HT patients were higher than those in the control group (4.5±5.2 ng/mL vs. 1.9±1.3 ng/mL). The hypothyroid patient’s group showed significantly higher levels of leptin than those of the healthy controls (5.1±5.2 ng/mL vs. 1.9±1.3 ng/mL), (p=0.031). Leptin levels correlated positively with body mass index (r=0.533, p<0.001), triglycerides (r=0.223, p=0.033), and immunoreactive insulin (r=0.488, p<0.001) levels. Serum adiponectin concentrations were higher in euthyroid HT patients than in the other groups, but the difference was not statistically significant (p=0.68). We found a positive correlation between adiponectin and HDL cholesterol levels (r=0.442, p<0.001), and negative with body mass index (r=−0.217, p=0.03), and immunoreactive insulin (r=−0.341, p=0.002). Conclusions: The results of this study suggest that leptin has a stronger effect than adiponectin in Hashimoto’s thyroiditis, which can be used to develop new therapeutic agents that modify its effect in the organism.
1 January 2015 in Journal of the Serbian Chemical Society
The formation and liquid-liquid extraction of ion-association complexes between Co(II)-4-(2-Pyridylazo)resorcinol (PAR) anionic chelates and cations of three ditetrazolium chlorides were studied: Blue Tetrazolium chloride (BTC), Neotetrazolium chloride (NTC) and Nitro Blue Tetrazolium chloride (NBT). The optimum conditions for the formation and solvent extraction of the ion-association comlpex chelates were determined. It has been found that in the systems of Co(II)-PAR-DTS, the reactants are reacted in molar ratios 1:2:1 and the general formula of complexes was suggested. The extraction equilibria were investigated and quantitatively characterized by the equilibrium constants and the recovery factors. The analytical characteristics of the complexes were calculated.
14 December 2021 in Russian Journal of Inorganic Chemistry
Complex formation and liquid-liquid extraction were examined in a system containing vanadium(V), 4-nitrocatechol (4NC), xylometazoline hydrochloride (XMH), water, and chloroform. Using a combination of experiment and calculations at the B3LYP/6-311G level of theory, it has been shown that vanadium(V) retains its initial oxidation state when the 4NC concentration is low. The extracted vanadium(V) ion-association complex has a composition of 1 : 2 : 1 (V : 4NC : XMH) and consists of a colorless xylometazolinium cation (XMH+) and a yellow anionic chelate, which can be represented by the formula [VVO(4NC2–)2]–. With a large excess of 4NC, spectral changes occur, indicating that vanadium(V) is reduced to vanadium(IV). Under optimal conditions (pH 5, extraction time t = 3 min, and c4NC = cXMH = 6.5 × 10–4 mol dm–3), the spectrum of the extracted species is characterized by a main absorption maximum at 399–400 nm and an additional low-intensity band at 640–710 nm. The distribution ratio, fraction extracted, molar absorptivity coefficient, and linear range were determined for these optimal conditions.
A novel method for the spectrophotometric determination of trace amounts of molybdenum has been developed. This method utilizes a centrifuge-less cloud point extraction (CL-CPE) in a mixed micellar (MM) system containing a nonionic surfactant (Triton X-114) and an ionic liquid (Aliquat® 336, A336). The chromophore chelating reagent employed was 4-nitrocatechol (4NC, H2L). This work marks its first application as a CPE reagent. Under the optimal conditions, Mo(VI) forms a yellow ternary complex with 4NC and A336, which can be represented by the formula (A336+)2[MoO2L2]. The method possesses the following characteristics: limit of detection (LOD) of 3.2 ng mL−1, linear range of 10.8–580 ng/mL, absorption maximum of 435 nm, molar absorptivity coefficient of 3.34 × 105 L mol−1 cm−1, and Sandell’s sensitivity of 0.29 ng cm−2. The method has been successfully employed for the determination of molybdenum in reference standard steel samples, bottled mineral water, and a molybdenum-containing dietary supplement.