The hydrophobic azo dye 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR, H2L) was studied as part of a system for the centrifuge-less cloud point extraction (CL-CPE) and spectrophotometric determination of traces of cobalt. The extracted 1:2 (Co:HTAR) complex, [CoIII(HL−)(L2−)]0, shows an absorption maximum at 553 nm and contains HTAR in two different acid–base forms. Optimum conditions for its formation and CL-CPE were found as follows: 1 × 10−5 mol L−1 of HTAR, 1.64% of Triton X-114, pH of 7.8, incubation time of 20 min at ca. 50 °C, and cooling time of 30 min at ca. −20 °C. The linear range, limit of detection, and apparent molar absorptivity coefficient were 5.4–189 ng mL−1, 1.64 ng mL−1, and 2.63 × 105 L mol−1 cm−1, respectively. The developed procedure does not use any organic solvents and can be described as simple, cheap, sensitive, convenient, and environmentally friendly. It was successfully applied to the analysis of artificial mixtures and real samples, such as steel, dental alloy, rainwater, ampoules of vitamin B12, and saline solution for intravenous infusion.
Two new vanadium (V) complexes involving 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR) and tetrazolium cation were studied. The following commercially available tetrazolium salts were used as the cation source: tetrazolium red (2,3,5-triphenyltetrazol-2-ium;chloride, TTC) and neotetrazolium chloride (2-[4-[4-(3,5-diphenyltetrazol-2-ium-2-yl)phenyl]phenyl]-3,5-diphenyltetrazol-2-ium;dichloride, NTC). The cations (abbreviated as TT+ and NTC+) impart high hydrophobicity to the ternary complexes, allowing vanadium to be easily extracted and preconcentrated in one step. The complexes have different stoichiometry. The V(V)–HTAR–TTC complex dimerizes in the organic phase (chloroform) and can be represented by the formula [(TT+)[VO2(HTAR)]]2. The other complex is monomeric (NTC+)[VO2(HTAR)]. The cation has a +1 charge because one of the two chloride ions remains undissociated: NTC+ = (NT2+Cl−)+. The ground-state equilibrium geometries of the constituent cations and final complexes were optimized at the B3LYP and HF levels of theory. The dimer [(TT+)[VO2(HTAR)]]2 is more suitable for practical applications due to its better extraction characteristics and wider pH interval of formation and extraction. It was used for cheap and reliable extraction–spectrophotometric determination of V(V) traces in real samples. The absorption maximum, molar absorptivity coefficient, limit of detection, and linear working range were 549 nm, 5.2 × 104 L mol−1 cm−1, 4.6 ng mL−1, and 0.015–2.0 μg mL−1, respectively.
A new liquid—liquid extraction system for molybdenum(VI) was studied. It contains 4-nitrocatechol (4NC) as a complexing chromogenic reagent and benzalkonium chloride (BZC) as a source of heavy cations (BZ+), which are prone to form chloroform-extractable ion-association complexes. The optimum conditions for the determination of trace molybdenum(VI) were found: concentrations of 4NC and BZC (7.5 × 10−4 mol dm−3 and 1.9 × 10−4 mol dm−3, respectively), acidity (3.75 × 10−2 mol dm−3 H2SO4), extraction time (3 min), and wavelength (439 nm). The molar absorptivity, limit of detection, and linear working range were 5.5 × 104 dm3 mol−1 cm−1, 5.6 ng cm−3, and 18.6–3100 μg cm−3, respectively. The effect of foreign ions was examined, and the developed procedure was applied to the analysis of synthetic mixtures and real samples (potable waters and steels). The composition of the extracted complex was 1:1:2 (Mo:4NC:BZ). Three possible structures of its anionic part [MoVI(4NC)O2(OH)2]2− were discussed based on optimizations at the B3LYP/3-21G level of theory, and simulated UV/Vis absorption spectra were obtained with the TD Hamiltonian.
14 December 2021 in Russian Journal of Inorganic Chemistry
Complex formation and liquid-liquid extraction were examined in a system containing vanadium(V), 4-nitrocatechol (4NC), xylometazoline hydrochloride (XMH), water, and chloroform. Using a combination of experiment and calculations at the B3LYP/6-311G level of theory, it has been shown that vanadium(V) retains its initial oxidation state when the 4NC concentration is low. The extracted vanadium(V) ion-association complex has a composition of 1 : 2 : 1 (V : 4NC : XMH) and consists of a colorless xylometazolinium cation (XMH+) and a yellow anionic chelate, which can be represented by the formula [VVO(4NC2–)2]–. With a large excess of 4NC, spectral changes occur, indicating that vanadium(V) is reduced to vanadium(IV). Under optimal conditions (pH 5, extraction time t = 3 min, and c4NC = cXMH = 6.5 × 10–4 mol dm–3), the spectrum of the extracted species is characterized by a main absorption maximum at 399–400 nm and an additional low-intensity band at 640–710 nm. The distribution ratio, fraction extracted, molar absorptivity coefficient, and linear range were determined for these optimal conditions.
The hydrophobic reagent 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR) was investigated as part of a cloud-point extraction (CPE) system for the spectrophotometric determination of Zn(II). In the system, complexes with different stoichiometries, including 1:1 and 2:2 (Zn:HTAR), are formed. Their ground-state equilibrium geometries were optimized at the B3LYP/6-31G level of theory. The obtained structures were then used to calculate vertical excitation energies in order to generate theoretical UV/Vis absorption spectra. The comparison between theoretical and experimental spectra demonstrated that, under optimal conditions, a binuclear complex containing oxygen-bridging atoms is the dominant species. The absorbance was found to be linearly dependent on the concentration of Zn(II) within the range of 15.7 to 209 ng mL−1 (R2 = 0.9996). The fraction extracted (%E), logarithm of the conditional extraction constant (log Kex), and molar absorption coefficient (ε) at λmax = 553 nm were calculated to be 98.3%, 15.9, and 4.47 × 105 L mol−1 cm−1, respectively. The method developed is characterized by simplicity, convenience, profitability, sensitivity, and ecological friendliness. It has been successfully applied to the analysis of pharmaceutical and industrial samples.
A novel, environmentally friendly cloud point extraction (CPE) method based on 4-nitrocatechol (H2L) was developed in this study to spectrophotometrically determine trace vanadium. This method utilizes a mixed micelle-mediated system comprising a cationic surfactant (cetylpyridinium chloride, CPC) and a nonionic surfactant (Triton X-114). In contrast to conventional CPE, the present approach does not employ centrifugation to separate the two phases. The distinguishing characteristic of the extracted species, (CP+)[VVOL2], is its ability to absorb light across the entire visible spectrum. The measurement at 670 nm, where the complex displays a local maximum, is advantageous for two primary reasons. Firstly, the blank exhibits virtually no absorption, a property that engenders stable and reproducible results. Secondly, selectivity is high because almost all other metal complexes have absorption bands at shorter wavelengths. The proposed method has the following characteristics: a linear range of 2–305 ng mL−1, a limit of detection of 0.6 ng mL−1, a molar absorptivity coefficient of 1.22 × 105 M−1 cm−1, a Sandell sensitivity of 0.42 ng cm−2, and a blue applicability grade index (BAGI) of 67.5. Its efficacy was demonstrated in the analysis of mineral water, a spent vanadium-containing catalyst, and a dietary supplement.