Solar generation has become increasingly important in grid applications. In order to improve the energy efficiency of the photovoltaic array (PV), factors such as temperature, nonlinear characteristics, and partial shadow conditions (PSCs) of the PV must be fully considered. An excellent maximum power point tracking (MPPT) control strategy can effectively improve the energy utilization efficiency of photovoltaic cells and provide strong support for the construction of smart campuses in terms of environmental protection and energy saving. A traditional method such as Perturb & Observe (P&O) and incremental conductance (INC) will fall into the local maximum power point (LMPP). In the past decade, researchers have proposed many MPPT methods to solve the difficulties of the PV system. However, they have failed to fully consider dynamic changes in irradiance conditions. Changes in the irradiance of photovoltaic arrays can lead to an extension of the convergence time and an increase in the oscillation amplitude. Many current MPPT methods have shortcomings such as requiring a long convergence time, large oscillation amplitude, and being prone to falling into LMPP. In order to reduce the oscillation amplitude and improve the convergence speed, a novel Multi-strategy Improved Tuna Swarm Optimization hybrid INC (ITSO-INC) method is introduced in this article. This strategy involves improving the Tuna Swarm Optimization (TSO) through Levy Flight and a linear weight coefficient. In addition, the INC method is added in the later stage to improve the accuracy of MPPT tracking. The proposed algorithm can extract the global maximum power point under different partial shading. In order to verify the effectiveness of the proposed method, the proposed method was compared with other metaheuristic algorithms such as Cuckoo Search (CS) and TSO. The proposed ITSO-INC technique was tested over four different patterns of partial shading conditions. Modulation was performed by tracking the sudden change in the shadow pattern of the MPP. These simulation results confirm that the proposed method has fast convergence, high accuracy, zero steady state oscillation, and a rapid response to dynamic change.
In this paper, a novel adaptive second-order sliding mode (2-SM) control approach, based on online zero-crossing detection, was proposed to solve the problems of the chattering and fixed control gain for buck converters with multi-disturbances. In modeling, the possible parameter perturbations and external disturbances of the converter system were contained. Instead of the traditional first-order sliding mode (1-SM), the twisting algorithm with 2-SM was adopted for the controller design, which could overcome the chattering problem and realize control continuity. Meanwhile, a novel adaptive mechanism was introduced to replace the conventional fixed control gain by time-varying control gain, the idea of which is to calculate the number of the zero-crossing points of the sliding surface online. As a result, the control magnitude of the improved controller could be reduced to a minimal admissible level, and the steady error of the output voltage could converge to the expected value. Furthermore, the robust stability of the converter system with multi-disturbances wads investigated. Comparative simulations and experiments validated the advantages of this paper as offering better robustness and control performance.