Using a thermal evaporator, various porous Cu films were deposited according to the deposition pressure. CuO films were formed by post heat treatment in the air. Changes in morphological and structural characteristics of films were analyzed using field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). Relative density and porosity were quantitatively calculated. CuO films with various pores ranging from 39.4 to 95.2% were successfully manufactured and were applied as gas sensors for H2S detection on interdigitated electrode (IDE) substrate. Resistance change was monitored at 325 °C and an increase in porosity of the film improved the sensor performance. The CuO-10 gas sensor with a high porosity of 95.2% showed a relatively high response (2.7) and a fast recovery time (514 s) for H2S 1.5 ppm. It is confirmed that the porosity of the CuO detection layer had a significant effect on response and recovery time.
Herein, we present a facile method to fabricate transparent, flexible, and high-performance thin-film heaters (TTFHs) based on nanostructured micromesh (NSMM) Cu–Ag/indium tin oxide bilayer transparent thin-film electrodes (TTFEs) with both nano- and microstructures. Our approach combines Ar-assisted thermal evaporation and pulsed laser ablation techniques to fabricate NSMM TTFEs with a low sheet resistance (∼2.1 Ω/sq) and high optical transmittance (∼80.1 %). By adjusting the spacing of microholes, we can achieve excellent figure of merit values (∼51.8 × 10−3 Ω−1) for the NSMM TTFEs. These electrodes also show excellent durability and flexibility, as evidenced by a resistance change of only 4 %–18 % in cyclic bending tests with up to 200,000 cycles. Finally, we demonstrate that the NSMM TTFEs can be used as high-performance TTFHs with short response times (3.97 s at a steady temperature of 87.5 °C under low-voltage operation (5 V)) and infrared shielding properties. Our results suggest that the Cu–Ag-alloy-based NSMM TTFEs are promising transparent electrodes for various applications in flexible electronics, smart windows, and wearable devices.