Two-dimensional (2D) or ultrathin metal sulfides have been emerging candidates in developing high-performance gas sensors given their physisorption-dominated interaction with target gas molecules. Their oxysulfide derivatives, as intermediates between oxides and sulfides, were recently demonstrated to have fully reversible responses at room temperature and long-term device stability. In this work, we explored the micro-scale self-assembly of ultrathin nickel oxysulfide through the calcination of nickel sulfide in a controllable air environment. The thermal treatment resulted in the replacement of most S atoms in the Ni-S frameworks by O atoms, leading to the crystal phase transition from original hexagonal to orthorhombic coordination. In addition, the corresponding bandgap was slightly expanded by ~0.15 eV compared to that of pure nickel sulfide. Nickel oxysulfide exhibited a fully reversible response towards H2 at room temperature for concentrations ranging from 0.25% and 1%, without the implementation of external stimuli such as light excitation and voltage biasing. The maximum response factor of ~3.24% was obtained at 1% H2, which is at least one order larger than those of common industrial gases including CH4, CO2, and NO2. Such an impressive response was also highly stable for at least four consecutive cycles. This work further demonstrates the great potential of metal oxysulfides in room-temperature gas sensing.
30 September 2022 in Journal of Materials Chemistry C
2D Ag 2 SO 4 nanosheets have been delaminated from bulk Ag 2 S using a two-step combined exfoliation method. Upon blue light irradiation, the 2D Ag 2 SO 4 -based sensor exhibits high-performance responses toward low-concentrated NO 2 gas at room temperature.
A critical requirement for low‐power microelectronics is the construction of logic circuits using complementary devices. In pursuit of low‐power solution‐processed thin film Complementary Metal Oxide Semiconductor (CMOS) circuits, significant research is expended toward producing the elusive p‐type transistors. Beyond the challenges associated with processability and formulation complexity of existing metal halide solutions, they critically do not attain the electrical properties required to build productive devices. For the first time, this work describes high‐performance solution‐processed p‐type thin film transistors developed using copper tin halide. Incorporating tin and high electronegativity halide species (Cl‐/F‐) improves CuI film morphology, stability, and electrical properties through copper/tin vacancy suppression, which results in high mobility, over 20 cm2 Vs−1, and low operating voltage Thin Film Transistors (TFTs). Furthermore, the p‐type TFTs are able to be integrated with fully solution‐processed n‐type Indium Gallium Zinc Oxide (IGZO) TFTs in a highly transparent multilayer stack architecture. The monolithic 3D (M3D) CMOS design records inverter gains of 20 at VDD = 3V, demonstrating p‐type devices fabricated using solution processing have the requisite high performance required for productive solution‐processed multilayer microelectronics.
Graphene oxide (GO) nanosheets, as one of the most studied graphene derivatives, have demonstrated an intrinsically strong physisorption-based gas–matter behavior, owing to its enhanced volume–surface ratio and abundant surface functional groups. The exploration of efficient and cost-effective synthesis methods for GO is an ongoing task. In this work, we explored a novel approach to upcycle inexpensive polyethylene terephthalate (PET) plastic waste into high-quality GO using a combination of chemical and thermal treatments based on a montmorillonite template. The obtained material had a nanosheet morphology with a lateral dimension of around ~2 µm and a thickness of ~3 nm. In addition, the GO nanosheets were found to be a p-type semiconductor with a bandgap of 2.41 eV and was subsequently realized as a gas sensor. As a result, the GO sensor exhibited a fully reversible sensing response towards ultra-low-concentration NO2 gas with a limit of detection of ~1.43 ppb, without the implementation of an external excitation stimulus including elevating the operating temperature or bias voltages. When given a thorough test, the sensor maintained an impressive long-term stability and repeatability with little performance degradation after 5 days of experiments. The response factor was estimated to be ~11% when exposed to 1026 ppb NO2, which is at least one order of magnitude higher than that of other commonly seen gas species including CH4, H2, and CO2.
2D nanomaterials have shown significant advances in next‐generation biosensor development. However, current 2D‐enabled electronic biosensors rarely achieve a detection limit down to pico‐gram level, possibly due to their intrinsic low carrier mobilities, biocompatibility or instability. TiO 2 , a biocompatible material, has been widely adopted in bio‐applications. Recently, 2D TiO 2 with a unique planar hexagonal phase exhibits a reduced bandgap of 2 eV and high p‐type mobility. A small perturbation could stimulate an observable electronic swing, enabling a high‐performance biosensor in a label‐free manner. Here, 2D h‐TiO 2 is fabricated into a liquid‐gated field‐effect transistor, while a wide spectrum, nonspecific biomarker carcinoembryonic antigen (CEA) is selected as the target molecule. The h‐TiO 2 surface is first functionalized with 3‐aminopropyltriethoxysilane and subsequently decorated with anti‐CEA, creating an affinity probe toward CEA molecules. The real‐time response to different concentrations of CEA is tested from 1 pg mL −1 to 10 ng mL −1 under a low working voltage of 0.05 V, and an ultralow detection limit of 0.22 pg mL −1 is achieved. Meanwhile, the selectivity of the devices is demonstrated using cytokeratin‐19‐fragment and neuron‐specific enolase. The results highlight the potential of layered hexagonal metal oxides for high‐performance biosensors, enabling future low‐power portable devices for disease diagnosis.