Energy conservation in buildings has been the focus of many studies since nearly one-third of global energy consumption is due to buildings. Phase change material (PCM) technology promises to be an attractive solution for energy saving in buildings since it is a passive and effective technology, as demonstrated in the literature. Therefore, this study focuses on the energy-saving performance of PCM-integrated buildings located in a Mediterranean climate to reveal their energy-saving potential. PCM is integrated both in external or internal south walls and roofs of buildings under four different climatic conditions. EnergyPlus, which is a well-known building simulation software, is adopted for building thermal analyses. The effects of melting temperature, location of PCM layer in the wall, thickness of PCM layer, type of envelope (wall or roof), and PCM double-layer system in the wall are investigated. The corresponding energy savings and CO₂ emission reductions are obtained for the considered cases. The results showed that up to 41.6% reduction in energy demand can be obtained depending on the PCM application. Besides, PCM with a low melting temperature (21 °C) favored heating energy savings, while PCM with a high melting temperature (29 °C) favored cooling energy savings. Moreover, the double-layer PCM system provided higher energy savings than the single-layer PCM system, especially in warm and arid regions (Sousse and Tozeur).

This study aims to explore the effects of augmenting the mass proportion of a composite comprising paraffin and beeswax (PBPCM) within plaster, which influences the thermal insulation of a dual wall. This work is primarily based on the thermal properties of the composite material PBPCM/plaster with varying percentages of PBPCM. Various essential parameters, such as density, thermal conductivity, specific heat capacity, thermal diffusivity, and latent heat, were assessed and juxtaposed with those of conventional plaster for the PBPCM/plaster composite material. The evaluation of this composite material was executed through an experimental device on a laboratory scale. The obtained results show that the increase in the mass fraction of PBPCM in the plaster decreased the thermal conductivity of plaster more than 3 times, whereas this increase of the PBPCM fraction in plaster enhances heat retention, specifically in specific heat capacity under constant conditions. Nevertheless, in a dynamic state, thermal effusivity has the lowest value for 50% PBPCM. The recommendation is to utilize 50% PBPCM, as it yields an optimal thermal effusivity, and significant values of specific heat capacity and latent heat have been noted for this percentage of PBPCM, measuring 1263.77 kJ/kg K and 18.9 kJ, respectively. Additionally, an increase in the PBPCM percentage narrows the temperature range suitable for effective thermal energy storage.

Integrating phase change materials (PCMs) into building envelopes offers a powerful method for enhancing thermal mass and reducing heating, ventilation, and air conditioning energy demand. This study provides a comprehensive analysis of combining PCMs with various roof designs (flat, gable, and domed) and shading strategies in a Mediterranean climate to optimize residential building performance. Through a 3E (energetic, environmental, and economic) assessment and computational fluid dynamics (CFD) modeling, we determined that the use of PCM23 significantly enhances occupant comfort, improving the predicted mean vote by 17% and enhancing overall thermal comfort by 14%. The most effective configuration, a gable roof with integrated PCMs, outperformed a flat roof by reducing annual energy consumption by 20% (1103 kWh). This optimal design also yielded substantial economic and environmental benefits, including a 16.2 TD/m² reduction in annual energy costs, a short investment payback period, and a 4% decrease in operational CO₂ emissions. These results highlight the significant potential of pairing PCMs with passive architectural features to create more energy-efficient, cost-effective, and comfortable living environments.

Several series of batch and fixed bed column experiments have been carried out to study the methylene blue sorption and transport in sandy and clay soil under different experimental conditions. The non linear forms of the pseudo-second order kinetic model and the Freundlich and Langmuir isotherm models were used to quantify the maximum adsorption capacity of the used materials. The effects of several experimental factors (flow rate, initial concentration, saturation condition of soil and soil heterogeneity) on the breakthrough curves have been undertaken. Experimental data revealed that the breakthrough curves depend on flow rate, methylene blue inlet concentration, saturation condition of soil and soil heterogeneity. A two dimensional model based on Richards equation and advection–dispersion equation coupled with adsorption model was developed. A comparative analysis between this model and Thomas model showed the effectiveness of advection–dispersion model to describe the experimental breakthrough curves and particularly in an unsaturated heterogeneous medium. The advection dispersion model reproduces perfectly the transfer mechanisms in porous media and seems to be a useful tool to better understanding the physical processes and the effect of capillary barrier of methylene blue transport in unsaturated heterogeneous soil. The result shows also that the soil heterogeneity has a significant effect on methylene blue adsorption through unsaturated layered media. Furthermore, in the interface between two layers with different hydrodynamic proprieties, the adsorption capacity increases with a decrease in kinetic adsorption rate caused by the decrease in pore water velocity