Kamila Shakhmurzova

Mrs. Kamila Shakhmurzova


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
ASAzamat Slonov
Azamat Slonov
IMIsmel Musov
Ismel Musov
AZAzamat Aslanovich Zhansitov
Azamat Aslanovich Zhansitov
ZKZhanna Inalovna Kurdanova
Zhanna Inalovna Kurdanova
KSKamila Shakhmurzova
Kamila Shakhmurzova
SKSvetlana Yu. Khashirova
Svetlana Yu. Khashirova
Polyphenylene sulfones (PPSU) blends with different viscosities have been studied. It is shown that the blends have a single-phase structure, regardless of the viscosities of the mixed polymers. It was found that blends having close values of the melt flow index (MFR) are also characterized by a similar melt viscosity in a wide range of shear rates, regardless of the viscosities of its constituent components. It has been found that PPSU blends with smaller MFR differences exhibit higher heat resistance and stability of mechanical properties, while blends with similar viscosity containing oligomers exhibit a broader molecular weight distribution (MWD) and have lower thermal and mechanical properties.

8 November 2022 in Membranes
Verified
Journal Article
Open access
PDF file
T. S. AnokhinaT. S. Anokhina
T. S. Anokhina
ARAlisa Raeva
Alisa Raeva
SSStepan Sokolov
Stepan Sokolov
ASAlexandra Storchun
Alexandra Storchun
MFMarina Filatova
Marina Filatova
Ilya BorisovIlya Borisov
Ilya Borisov
In this work, PPSUs with different molecular weights were synthesized for the development of highly permeable ultrafiltration hollow fiber membranes for the first time. The MW of the synthesized polymers was controlled by varying the monomers molar ratio within 1:1–1.15 under the same synthesis conditions. Based on the study of the rheological properties of polymer solutions, a high molecular weight PPSU (MW = 102,000 g/mol) was chosen for the formation of hollow fiber membranes. The addition of PEG400 to the spinning solution led to an increase in viscosity, which makes it possible to work in the region of lower PPSU concentrations (18–20 wt. %) and to form membranes with a less dense porous structure. With the addition of PEG400 to the spinning solution, the membrane permeance increased sharply by more than two orders of magnitude (from 0.2 to 96 L/m2·h bar). At the same time, the membranes had high rejection coefficients (99.9%) of Blue Dextran model filtered substance (MW = 69,000 g/mol).

12 May 2023 in Polymers
Verified
Journal Article
Open access
PDF file
AZAzamat Aslanovich Zhansitov
Azamat Aslanovich Zhansitov
ZKZhanna Inalovna Kurdanova
Zhanna Inalovna Kurdanova
KSKamila Shakhmurzova
Kamila Shakhmurzova
ASAzamat Slonov
Azamat Slonov
Ilya BorisovIlya Borisov
Ilya Borisov
SKSvetlana Yu. Khashirova
Svetlana Yu. Khashirova
For the first time, the effect of the solvent and monomer ratio on molecular weight, chemical structure, and mechanical, thermal, and rheological characteristics of polyphenylene sulfone has been studied. When dimethylsulfoxide (DMSO) is used as a solvent, cross-linking occurs during the processing of the polymer, which is accompanied by an increase in melt viscosity. This fact sets a pressing need for the complete removal of DMSO from the polymer. The best solvent used for the production of PPSU is N,N-dimethylacetamide. This study of the molecular weight characteristics of polymers by gel permeation chromatography showed the stability of the polymers practically does not change with a decrease in molecular weight. The synthesized polymers correspond in tensile modulus to the commercial analog Ultrason-P, while exceeding it in terms of tensile strength and relative elongation at break. Thus, the developed polymers are promising for spinning hollow fiber membranes with a thin selective layer.

26 October 2021 in Polymers
Verified
Journal Article
Open access
PDF file
ZKZhanna Inalovna Kurdanova
Zhanna Inalovna Kurdanova
AZAzamat Aslanovich Zhansitov
Azamat Aslanovich Zhansitov
KSKamila Shakhmurzova
Kamila Shakhmurzova
ASAzamat Slonov
Azamat Slonov
ABArtur Baykaziev
Artur Baykaziev
SKSvetlana Yu. Khashirova
Svetlana Yu. Khashirova
Copolymers based on 4,4′-dihydroxydiphenyl, phenolphthalein and 4,4′-dichlorodiphenyl sulfone were synthesized by the method of high temperature polycondensation. The structure of the synthesized copolymers was confirmed by IR spectroscopy. Their physical, mechanical and thermal properties were investigated. It is shown that increases in the content of carded fragments lead to higher glass transition temperatures and heat resistance of the copolymers, as well as higher elastic and strength properties.

5 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ARAlisa Raeva
Alisa Raeva
DMDmitry Matveev
Dmitry Matveev
NBNikolay Bezrukov
Nikolay Bezrukov
Evgenia GrushevenkoEvgenia Grushevenko
Evgenia Grushevenko
AZAzamat Aslanovich Zhansitov
Azamat Aslanovich Zhansitov
Ilya BorisovIlya Borisov
Ilya Borisov
For the first time, copolymers of polyphenylene sulfone (PPSU) with cardo fragments of phenolphthalein (PP) were synthesized to develop highly permeable flat-sheet ultrafiltration membranes. By introducing cardo fragments into the polymer chain, we achieved a mechanical strength 1.3 times higher than the strength of commercial PPSU. It is shown that the introduction of the cardo monomer significantly increases the solubility of the polymer in aprotic solvents. The highest solubility is observed at the concentration of PP 50 mol.%. It is found that reduced viscosity of cardo polymer solutions leads to an increase in the coagulation rate. The permeance of asymmetric ultrafiltration membranes increases with PP concentration from 17.5 L/(m2·h·bar) (10 mol.% PP) to 85.2 L/(m2·h·bar) (90 mol.% PP). These data are in agreement with the results of a study of the coagulation rate of polymer solutions. Thus, for ultrafiltration membranes with 1.5–8 times higher permeance in comparison with PPSU due to the introduction of cardo fragments in the polymer chain, possessing high rejection of the model dye Blue Dextran (MW = 70,000 g/mol), more than 99.2%, as well as high strength characteristics, were achieved.

1 January 2019 in ChemChemTech
Verified
Journal Article
Closed access
ZKZhanna Inalovna Kurdanova
Zhanna Inalovna Kurdanova
KSKamila Shakhmurzova
Kamila Shakhmurzova
AZAzamat Aslanovich Zhansitov
Azamat Aslanovich Zhansitov
ABArthur E. Baykaziev
Arthur E. Baykaziev
KTKarina Kh. Teunova
Karina Kh. Teunova
SKSvetlana Yu. Khashirova
Svetlana Yu. Khashirova
The review summarizes and systematizes the currently known data on the synthesis of polyetherimides. Polyetherimides are a promising class of high-quality polymeric materials with a valua-ble set of properties that can be directed to the appropriate design of the polymer chain. Thus, to obtain polyetherimide with a lower glass transition temperature, as much as possible of ether bonds are introduced into the macromolecule, as well as m-phenylene fragments that increase the flexibility of the polymer chain. Polyetherimides of this structure are amorphous and soluble in a number of amide solvents and chlorinated hydrocarbons. Three main methods for the preparation of polyetherimide are discussed in detail: high-temperature polycondensation by nucleophilic substitution in solution, polycondensation in a melt, and production of polyetherimide directly during extrusion. The most promising method for today is the method of high-temperature polycondensation in solution by the reaction of nucleophilic aromatic substitution. As a halogen-containing monomer, chlorine or fluorophthalic anhydrides are used in the synthesis. The reaction of diamines with chlorophthalic anhydride proceeds at lower rates in comparison with the fluorine-containing analog. However, the use of fluorophthalic anhydride proved to be inexpedient from the economic point of view. The economic availability of the corresponding nitrosubstituted phthalic derivatives and high rates of displacement of nitro groups with the help of aryl oxide ions allow to product the commercially avail-able polymers. As solvents, aprotic dipolar (dimethylsulfoxide, N,N-dimethylformamide, N,N-dimethylacetamide, N-methylpyrrolidone, etc.), nonpolar organic (o-dichlorobenzene, methylene chloride, etc.) and phenolic solvents can be used. However, the increasing attention of researchers is attracted to the synthesis in the environment of o-dichlorobenzene.