A large amount of biomass straw waste is generated every year in the world, which can cause serious environmental pollution and resource waste if disposed of improperly. At present, biomass-derived porous carbon materials prepared from biomass waste as a carbon source have garnered attention due to their renewability, huge reserves, low cost, and environmental benevolence. In this work, high-performance carbon materials were prepared via a one-step carbonization-activation method and ball milling, with waste tobacco straw as precursor and nano-ZnO as template and activator. The specific surface area and porous structure of biomass-derived carbon could be controlled by carbonization temperature, which is closely related to the electrochemical performances of the carbon material. It was found that, when the carbonization temperature was 800 °C, the biochar possesses maximum specific surface area (1293.2 m2·g−1) and exhibits high capacitance of 220.7 F·g−1, at 1 A·g−1 current density in a three-electrode configuration with 6 M KOH aqueous solution. The capacitance retention maintained about 94.83% at 5 A·g−1 after 3000 cycles. This work proves the porous biochar derived from tobacco straws has a great potential prospect in the field of supercapacitors.
Large quantities of tobacco stalks residues are generated and discarded as crop waste or combusted directly every year. Thus, we need to find an appropriate way to dispose of this type of waste and recycle it. The conversion of biomass waste into electrode materials for supercapacitors is entirely in line with the concept of sustainability and green. In this paper, tobacco-stalk-based, porous activated carbon (TC) was successfully synthesized by high-temperature and high-pressure hydrothermal pre-carbonization and KOH activation. The synthesized TC had a high pore volume and a large surface area of 1875.5 m2 g−1, in which there were many mesopores and interconnected micro-/macropores. The electrochemical test demonstrated that TC-1 could reach a high specific capacitance of up to 356.4 F g−1 at a current density of 0.5 A g−1, which was carried in 6M KOH. Additionally, a symmetrical supercapacitor device was fabricated by using TC-1 as the electrode, which delivered a high energy density up to 10.4 Wh kg−1 at a power density of 300 W kg−1, and excellent long-term cycling stability (92.8% of the initial capacitance retention rate after 5000 cycles). Therefore, TC-1 is considered to be a promising candidate for high-performance supercapacitor electrode materials and is a good choice for converting tobacco biomass waste into a resource.
The recycling of macromolecular biowastes has been a problem for the agriculture industry. In this study, a novel N, S-codoped activated carbon material with an ultrahigh specific area was produced for the application of a supercapacitor electrode, using tobacco stalk biowastes as the carbon source, KOH as the activating agents and thiourea as the doping agent. Tobacco stalk is mainly composed of cellulose, but also contains many small molecules and inorganic salts. KOH activation resulted in many mesopores, giving the tobacco stem-activated carbon a large specific surface area and double-layer capacitance. The specific surface area of the samples reached up to 3733 m2·g−1, while the maximum specific capacitance of the samples obtained was up to 281.3 F·g−1 in the 3-electrode tests (1 A·g−1). The doping of N and S elements raised the specific capacitance significantly, which could be increased to a value as high as 422.5 F·g−1 at a current density of 1 A·g−1 in the 3-electrode tests, but N, S-codoping also led to instability. The results of this article prove that tobacco stalks could be efficiently reused in the field of supercapacitors.
1 January 2022 in Journal of Physics: Conference Series
A large amount of tobacco straw residues is produced around the world every year. These tobacco straw residues are usually incinerated or landfilled directly, which cause environmental pollution and waste of resources. Therefore, it is necessary to find a green way to recycle these tobacco straw residues. Converting tobacco straw residues into biomass carbon materials for supercapacitor electrode materials is an appropriate way. In this study, tobacco straw core carbon (TSC) was obtained from tobacco straw core waste, which was carbonized directly in the tube furnace without N2. The tobacco straw core carbon had a higher specific surface area because of the self-activation of the H2O and CO2 in the carbonization. A variety of analytical instruments were used to characterize the prepared porous carbon. Herein, this work can provide new ideas for energy materials, and solve the problem of the disposal of tobacco straw residues. What’s more, it also can provide a sustainable development opportunity for tobacco farmers to alleviate poverty, dig potential and transform.