Wenjuan Li

Wenjuan Li


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 October 2022 in Minerals
Verified
Journal Article
Open access
PDF file
WXWeiguang Xu
Weiguang Xu
WLWenjuan Li
Wenjuan Li
WJWang Jianwei
Wang Jianwei
YSYongsheng Song
Yongsheng Song
BWBiao Wu
Biao Wu
BLBIN 宾 LI
BIN 宾 LI
A micro–nanobubble generator is the most critical component of micro–nano flotation equipment. Understanding the bubble generation characteristics in the generator plays a vital role in optimizing the performance of the device and improving the flotation of fine-grained minerals. In this study, to explore the generation and evolution of bubbles in the micro–nanobubble generator of a cyclonic jet flotation cell, the flow field parameters of the gas–liquid two-phase flow inside the generator were solved using CFD–PBM combined with Luo’s population balance model. The internal bubble size was in the range of 0.99 μm to 140 μm. After the gas entered the generator from the suction pipe, it mainly moved in the center of the tube, and the diameter of the bubbles was relatively large at this time. With the bubble movement, large bubbles in the center were broken into small bubbles and then moved toward the periphery of the tube. Thereafter, the smaller-diameter bubbles gathered and formed large-diameter bubbles. The average diameter of the generated bubbles gradually increased from approximately 30 to 110 μm.

27 April 2022 in Minerals
Verified
Journal Article
Open access
PDF file
YCYong Chen
Yong Chen
JWJiankang Wen
Jiankang Wen
YSYongsheng Song
Yongsheng Song
WLWenjuan Li
Wenjuan Li
SLShuang Liu
Shuang Liu
YLYing Liu
Ying Liu
The technological mineralogical characteristics of cesium-containing minerals in tailings were examined by means of chemical analysis, the energy spectrum analysis method, and MLA (mineral liberation analyzer) to determine the element content, phase analysis, associated mineral components, degree of liberation, particle size, etc. The results showed that the samples mainly contained spodumene, quartz, feldspar, mica, and other minerals. Pollucite was the main cesium-containing mineral in the sample, which had a cesium oxide content that was as high as 34.58%. The mineral content of pollucite in the sample was relatively low—only 1.23%. The pollucite monomer content and the amount of rich intergrowth was 85.25%, and the metal distribution of cesium in the +0.074 mm sample was as high as 87.06%. Spodumene was the main mineral associated with pollucite. The beneficiation evaluation of this tailing sample was conducted using a combined process that integrated desliming, magnetic separation, and froth flotation, and a pollucite concentrate containing 4.45% Cs2O was obtained with a 63.71 recovery rate. This indicates that little pollucite was removed by means of desliming and magnetic separation before froth flotation recovery, but during the froth flotation stage in spodumene and feldspar, a large pollucite loss was observed. Therefore, to improve pollucite recovery, a pollucite-specific adsorption reagent should be synthesized.

13 January 2022 in Minerals
Verified
Journal Article
Open access
PDF file
WLWenjuan Li
Wenjuan Li
HSHe Shang
He Shang
HZHe Zhou
He Zhou
YSYongsheng Song
Yongsheng Song
SZShuilin Zheng
Shuilin Zheng
XYXinlong Yang
Xinlong Yang
The present work investigated the comparison of the effects of Na2SO3 and Na2SiO3 on thiourea stabilization, and a systematic study was undertaken to establish the effects of these stabilizers on the stability of alkaline thiourea, both qualitatively and quantitatively. The effects of these stabilizers on the activation energy of alkaline thiourea gold leaching was also studied. The results showed that sodium silicate was more suitable as a stabilizer in this system than sodium sulfite because the peak current of gold dissolution with sodium sulfite was higher than that with sodium silicate, but the inhibition of thiourea decomposition by the former was less obvious than that of sodium silicate in the cyclic voltammetry curve. The quartz crystal microbalance results showed that the quality decreased to about 100 ng cm2 in the presence of a stabilizer, while it increased to 300 ng cm2 in the absence of the stabilizer. It is inferred that gold can be dissolved by alkaline thiourea in the presence of a stabilizer, while it cannot without a stabilizer because of the decomposition of thiourea. This assumption was confirmed by atomic force microscopy measurements. The surface activation energy of Au dissolution decreased from 183.76 to 98.07 kJ/moL with the addition of sodium silicate, indicating that Au dissolution was promoted with the chemical.

31 August 2023 in Minerals
Verified
Journal Article
Open access
PDF file
MWMiao Wang
Miao Wang
WLWenjuan Li
Wenjuan Li
GLGuan Le
Guan Le
Jianhua ChenJianhua Chen
Jianhua Chen
XYXi Yang
Xi Yang
YSYongsheng Song
Yongsheng Song
The galvanic interaction of gold and associated sulfide minerals in thiocyanate systems has a significant impact on gold leaching. The density functional theory was used to further reveal the galvanic interaction between gold and associated minerals. The electron transfer between gold and its associated minerals at different galvanic interaction distances was simulated. The results show that with the increase of the contact distance between pyrite and gold, the charge of pyrite increases, indicating that it is losing electrons gradually; the charge of arsenopyrite and chalcocite decreases with the rise of the contact distance between gold and pyrite, suggesting that they are gaining electrons. In addition, gold has the greatest influence on the gain and loss of electrons in pyrite and arsenopyrite and has the least influence on chalcocite. Through the calculation of the density of states, it is found that different distances of galvanic interaction have a great influence on the density of states of surface atoms under the action of pyrite and arsenopyrite with gold but have little effect on the density of states of surface atoms under the action of chalcocite with gold.

25 May 2026 in Minerals
Verified
Journal Article
Open access
PDF file
RNRong Nie
Rong Nie
XYXinlong Yang
Xinlong Yang
BTBingyang Tian
Bingyang Tian
WLWenjuan Li
Wenjuan Li
XLXue Liu
Xue Liu
HYHongying Yang
Hongying Yang
Heap bioleaching is widely used to extract copper from low-grade sulfide ores thanks to its operational simplicity, low cost, and environmental sustainability. However, current control strategies rely primarily on single-factor optimization and often overlook the synergistic interactions of multiple key parameters, such as ore particle size, pore structure, pH, temperature, microbial activity, and oxygen transfer efficiency. As a result, issues such as low recovery rates, extended leaching periods, and high operational costs persist. Moreover, the “gray-box” nature of heap systems impedes real-time monitoring of internal physical, chemical, and biological processes. In addition, empirical multi-parameter optimization is time-consuming and inadequate for capturing complex interdependencies. This review was conducted to systematically examine the key factors influencing heap bioleaching efficiency and critically evaluate recent advances in numerical simulation and intelligent control strategies. As a result, we identified a major research gap: the existing models—including microscale shrinking core models (SCMs), mesoscale pore-network models based on CT reconstruction, and macroscale continuum models—have inherent limitations. SCMs assume idealized spherical particles with uniform mineral distribution while neglecting pore structure evolution and biofilm dynamics. Mesoscale models offer detailed pore characterization but lack robust multi-physics coupling (thermal–hydro–mechanical–chemical–biological, or THMCB). Macroscale models rely on homogenization assumptions that oversimplify spatial heterogeneity and temporal variations in permeability. This analysis covers the relevant literature from 1985 to 2025, with a focus on three methodological scales (micro, meso, and macro) and their integration with machine learning approaches. A notable finding is that hybrid neural network models (e.g., BP and RBF architectures) outperform purely physics-based models in predicting leaching kinetics under varying operational conditions. However, their accuracy depends heavily on high-quality field data—a limitation rarely addressed in prior reviews. By clearly delineating these model-specific limitations and scale-dependent trade-offs, this review makes two unique contributions: a structured framework for selecting and coupling numerical methods according to process requirements and a roadmap for integrating artificial neural networks with multi-physics simulations to achieve real-time intelligent control of heap bioleaching. The findings offer both theoretical guidance and practical references for optimizing the processing of low-grade copper sulfide ores.