Nanocomposite foams based on ethylene vinyl acetate (EVA) copolymer had been prepared by melt blending EVA with the addition of organically modified montmorillonite (OMMT). The clay interlayer spacing was characterized by x-ray diffraction (XRD). The morphology of the foamed samples was studied using transmission electron microscopy and the cell microstructure was characterized by scanning electron microscope. The cell size distribution of the foamed samples was discussed. The effect of OMMT content in the foamed samples on the cellular structure and mechanical properties had been investigated. It had been shown that the OMMT layer could be used as a heterogeneous nucleation agent to decrease the cell size. The uniformity of cell structure of the foamed samples was improved and the physical properties of EVA/OMMT nanocomposite foams were enhanced by the addition of OMMT.
As modern aeroengine combustors advance towards high temperatures, afterburners are inevitably affected by diminished oxygen content in incoming flows, thus affecting combustion efficiency, instability, and flammability limits. In this study, the dynamic combustion characteristics of V-shaped bluff body-stabilised diffusion flames were investigated using a large eddy simulation method with an oxygen mass fraction range of 14–23% and temperatures ranging from 900 to 1100 K. The results show the significant effects of oxygen content and inflow temperature on the flame/flow behaviours downstream of the bluff-body flame holder. In a separated shear layer, two distinct modes of flow/flame shedding are observed when varying the oxygen content and inflow temperature. The results show that BVK instability governs the far-field wake flow/flame features, whereas the oxygen concentration and temperature significantly affect their oscillation amplitudes. In addition, variations in the incoming oxygen content and temperature shift the axial position of the transition from KH instability to BVK instability. Finally, a spectral analysis is conducted to investigate the characteristics of pressure and heat release pulsations under different scenarios. This study highlights the importance of oxygen content on the combustion dynamics of bluff body-stabilised diffusion flames at various temperatures, which is essential for optimising combustion efficiency and stability in practical applications.
An afterburner encounters two primary features: high incoming flow velocity and low oxygen concentration in the incoming airflow, which pose substantial challenges and contribute significantly to the deterioration of combustion performance. In order to research the influence of oxygen content on the dynamic combustion characteristics of the afterburner under various inlet velocities, the effect of oxygen content (14–23%) on the field structure of reacting bluff body flow, flame morphology, temperature pulsation, and pressure pulsation of the afterburner at different incoming flow velocities (0.1–0.2 Ma) was investigated in this study by using a large eddy simulation method. The results show that two different instability features, BVK instability and KH instability, are observed in the separated shear layer and wake, and are influenced by changes in the O2 mass fraction and Mach number. The oxygen content and velocity affected the oscillation amplitude of the downstream flow. As the O2 mass fraction decreases, the flame oscillation amplitude increases, the OH concentration in the combustion chamber decreases, and the flame temperature decreases. Additionally, the amplitude of the temperature pulsation in the bluff body flame was primarily influenced by the temperature intensity of the flame and BVK instability. Moreover, the pressure pulsation is predominantly affected by the dynamic characteristics of the flow field behind the bluff body. When the BVK instability dominated, the primary frequency of the pressure pulsation aligned with that of the temperature pulsation. Conversely, under the dominance of the KH instability, the temperature pulsation did not exhibit a distinct main frequency. At present, the influence of oxygen content and incoming flow rate on the combustion performance of the combustion chamber is not clear. The study of the effect of oxygen content on the combustion characteristics of the combustion chamber at different incoming flow rates provides a reference for improving the performance of the combustion chamber and enhancing the combustion stability.