Heat exchangers play an important role in power, the chemical industry, petroleum, food and many other industrial productions, while compact heat exchangers are more favored in industrial applications due to their high thermal efficiency and small size. This paper summarizes the research status of different types of compact heat exchangers, especially the research results of heat transfer and pressure drop of printed circuit heat exchangers, so that researchers can have an overall understanding of the development of compact heat exchangers and get the required information quickly. In addition, this paper summarizes and analyzes several main working fluids selected in compact heat exchangers, and puts forward some discussions and suggestions on the selection of working fluids. Finally, according to the existing published literature, the performance evaluation indexes of compact heat exchangers are summarized and compared, which is convenient for developers and researchers to better grasp the design direction.
4 January 2023 in Korean Journal of Chemical Engineering
This study investigates the thermal performance of an oil-jet-cooled permanent magnet synchronous motor (PMSM), with a particular focus on end-winding heat dissipation. A high-fidelity numerical model that preserves the full geometric complexity of the end-winding is developed and validated against experimental temperature data, achieving average deviations below 7%. To facilitate efficient parametric analysis, a simplified equivalent model is constructed by replacing the complex geometry with a thermally equivalent annular region characterized by calibrated radial conductivity. Based on this model, the effects of key spray ring parameters—including orifice diameter, number of nozzles, inlet oil temperature, and flow rate—are systematically evaluated. The results indicate that reducing the orifice diameter from 4 mm to 2 mm lowers the maximum winding temperature from 162 °C to 153 °C but increases the pressure drop from 205 Pa to 913 Pa. An optimal nozzle number of 12 decreases the peak winding temperature to 155 °C compared with 162 °C for 8 nozzles, while increasing the oil flow rate from 2 L/min to 6 L/min reduces the peak winding temperature from 162 °C to 142 °C. Furthermore, a non-uniform spray ring configuration decreases maximum stator, winding, spray ring, and shaft temperatures by 5.6–9.2% relative to the baseline, albeit with a pressure drop increase from 907 Pa to 1410 Pa. These findings provide quantitative guidance for optimizing oil-jet cooling designs for PMSMs under engineering constraints.
As modern aeroengine combustors advance towards high temperatures, afterburners are inevitably affected by diminished oxygen content in incoming flows, thus affecting combustion efficiency, instability, and flammability limits. In this study, the dynamic combustion characteristics of V-shaped bluff body-stabilised diffusion flames were investigated using a large eddy simulation method with an oxygen mass fraction range of 14–23% and temperatures ranging from 900 to 1100 K. The results show the significant effects of oxygen content and inflow temperature on the flame/flow behaviours downstream of the bluff-body flame holder. In a separated shear layer, two distinct modes of flow/flame shedding are observed when varying the oxygen content and inflow temperature. The results show that BVK instability governs the far-field wake flow/flame features, whereas the oxygen concentration and temperature significantly affect their oscillation amplitudes. In addition, variations in the incoming oxygen content and temperature shift the axial position of the transition from KH instability to BVK instability. Finally, a spectral analysis is conducted to investigate the characteristics of pressure and heat release pulsations under different scenarios. This study highlights the importance of oxygen content on the combustion dynamics of bluff body-stabilised diffusion flames at various temperatures, which is essential for optimising combustion efficiency and stability in practical applications.
This study develops and validates a thermodynamic model for a supercritical carbon dioxide (CO2) pneumatic launch system, evaluating its potential as an environmentally friendly and efficient energy conversion technology alternative to conventional working fluids such as compressed air and nitrogen. Utilizing real-gas thermophysical properties from the NIST database, the model incorporates mass and energy conservation principles to simulate the transient launch process. Under the assumption of a pre-attained initial state, comparative analyses demonstrate that supercritical CO2 offers significantly higher specific internal energy, resulting in up to 20% greater payload capacity and improved exit velocities under identical initial conditions. A detailed parametric investigation examines the effects of key structural parameters—including the initial volume of the low-pressure chamber, launch tube diameter, valve diameter, and valve opening time—on launch performance, efficiency, and safety. Results indicate that while a smaller low-pressure chamber volume and larger launch tube diameter enhance launch efficiency and velocity, they must be balanced against structural safety limits to avoid excessive acceleration. Valve diameter expansion improves mass transfer and acceleration, yet diminishing returns are observed beyond 0.10 m. The study highlights supercritical CO2 as a promising high-energy-density working fluid that eliminates toxic exhaust at the launch site. These findings provide practical guidelines for system design optimization, offering a technical pathway toward compact, low-emission pneumatic launch equipment, provided that the upstream energy for CO2 conditioning is efficiently managed.
To satisfy the electricity demands and further improve the cooling performance of scramjets, the supercritical CO2 Brayton cycle is adopted as a promising cooling and power supplying scheme. However, with the extremely high heat flux level of MW/m2, a cooling channel featuring a rectangular cross-section with non-uniform heat flow and different positions of the heated wall relative to the direction of gravity make the flow and heat transfer characteristics of supercritical CO2 within scramjet cooling channel extremely complex. In this study, the effects of different angles of the heated wall normal direction relative to the direction of gravity (θ) on the flow and heat transfer behavior of supercritical CO2 within a scramjet cooling channel are comprehensively investigated. The results show that the spanwise heat transfer coefficient on the heated wall decreases while on the opposite wall it increases as θ increases. Moreover, the overall heat transfer performance is insensitive to variations in θ, but the heat transfer characteristics on different walls are sensitive to variations in θ. Moreover, the cases with lower θ provide better heat transfer performance for the heated wall, which is more significant for scramjet cooling due to having the highest heat load. In detail, the averaged HTC on the HW of θ = 180 deg for G = 900 kg/(m2s) is reduced by 11.79% in comparison to that of θ = 0 deg, while it is enhanced by 18.70%, 6.39% and 6.39% for the OW, LW and RW, respectively.