The incorporation of a corrosion inhibitor into a cement-based material can enhance the durability of the reinforced concrete. In this study, molecular dynamics simulation is utilized to study the interfacial structure and dynamic behavior of a solution with three migrating corrosion inhibitors (MCI) functionalized by hydroxyl (–OH), carboxyl (–COO−), and phenyl (–PH) groups in calcium silicate hydrate (CSH) gel pores. The transport rate of inhibitors is greatly dependent on the polarity of the functional group: –PH > –OH > –COO−. The slow migration rate of the inhibitor with –OH and –COO− is attributed to the chemical bond formed between CSH and MCI. The silicate chains near the CSH surface can provide plenty of non-bridging oxygen sites to accept the H-bond from the hydroxyl group in the inhibitor molecule. The surface calcium atom can capture the –COO− by forming an ionic COO–Ca bond. Furthermore, the hydration structure of the inhibitor molecule also influences its transport properties. The inhibitor functionalized by the carboxyl group, associating with the neighboring water molecules, forms ion–water clusters, and the inhibitor molecule and its hydration shell with a long resident time retard the migration rate. Hopefully, this study is able to provide molecules for the development of a migration-type corrosion inhibitor to elongate the service life of cement-based materials.
16 September 2025 in Construction and Building Materials
This study explores an advanced prefabricated composite structure, namely ECC/RC composite shear walls with enhanced seismic performance. This performance enhancement is attributed to the strategic use of engineered cementitious composites (ECC) known for their superior ductility. The study conducts both experimental and numerical simulation analyses to scrutinize the seismic energy absorption capabilities of this innovative structure. Emphasis is placed on critical aspects, such as the optimal deployment areas for ECC within composite coupling beams and shear walls, the grade of ECC strength, the proportion of stirrups in coupling beams, and the caliber of longitudinal reinforcement. Through finite element analysis, this research quantitatively assesses the impact of these variables on seismic energy dissipation, incorporating evaluations of load–displacement hysteretic behaviors and the energy dissipation potential of ECC/RC shear wall samples. The findings suggest the optimal ECC application in the coupling beams, and within a 14% structural height at the base of shear walls. Recommended design parameters include an ECC strength grade of E40 (40 MPa), longitudinal reinforcement of HRB400 (400 MPa), and a stirrup ratio in coupling beams of 0.5%.
This paper experimentally studied the effects of different molybdenum tailings (MoT) content, standard curing and 60 °C water curing conditions on the compressive strength of fly ash-based geopolymers at different ages. X-ray diffraction (XRD), scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) and Fourier-transform infrared spectroscopy (FTIR) were applied to investigate the effect of the content of MoT and different curing conditions on the reaction products, microstructure and chemical composition of fly ash-based geopolymers. The results show that MoT content and curing conditions have synergistic effects on the compressive strength of fly ash-based geopolymers. For standard curing, the increase in MoT content is detrimental to the development of compressive strength, and an obvious weak interfacial transition zone between MoT and the gel product is observed in specimen containing 40 wt% MoT; meanwhile, under water curing conditions, the compressive strength of geopolymers first increases and then decreases with the increase in MoT, and the 28-day compressive strength can reach 90.3 MPa when the content of MoT is 10 wt%. The SEM results show that the curing conditions have a great influence on the microstructure of the geopolymer matrix, and the microstructure of the specimens under the water curing conditions is smoother and denser, with fewer pores. EDS analyses show that the gel product constituting the geopolymer matrix is N(C)-A-S-H gel; MoT can participate in the reaction, and the mass ratio of Ca/(Si + Al) of N(C)-A-S-H gel increases with the increase in MoT, resulting in a decrease in compressive strength. In addition, the results of the FTIR confirm that water curing can increase the degree of crosslinks in the gel phase.