This study explores an advanced prefabricated composite structure, namely ECC/RC composite shear walls with enhanced seismic performance. This performance enhancement is attributed to the strategic use of engineered cementitious composites (ECC) known for their superior ductility. The study conducts both experimental and numerical simulation analyses to scrutinize the seismic energy absorption capabilities of this innovative structure. Emphasis is placed on critical aspects, such as the optimal deployment areas for ECC within composite coupling beams and shear walls, the grade of ECC strength, the proportion of stirrups in coupling beams, and the caliber of longitudinal reinforcement. Through finite element analysis, this research quantitatively assesses the impact of these variables on seismic energy dissipation, incorporating evaluations of load–displacement hysteretic behaviors and the energy dissipation potential of ECC/RC shear wall samples. The findings suggest the optimal ECC application in the coupling beams, and within a 14% structural height at the base of shear walls. Recommended design parameters include an ECC strength grade of E40 (40 MPa), longitudinal reinforcement of HRB400 (400 MPa), and a stirrup ratio in coupling beams of 0.5%.
This paper proposes a multiscale damage identification method for beam-type structures based on node curvature. Firstly, based on the assumption that micro-damage has little effect on stress redistribution and the basic relationship between structural bending moment and curvature, combined with the denoising function of wavelet analysis, the linear matrix equation before and after node curvature damage is solved using the singular value decomposition (SVD) method. Then, the theoretical feasibility of this method is verified with laboratory tests of a simply supported beam. Finally, the damage sensitivity and noise resistance of this method are verified using field measurements of a beam bridge. The results show that the nodal curvature serves as an indicator parameter for damage identification in beam-type structures, enabling the precise localization of damage within these structures. When utilizing a multiscale finite element model for analysis, the nodal curvature enhances the ability to identify both the location and severity of damage within small-scale elements. Furthermore, this method can provide a reference for the damage identification and health monitoring of other types of bridges.
This study explores the design and analysis of a negative stiffness plate aimed at enhancing vibration suppression. The concept of the negative stiffness plate is illustrated through the implementation of periodic resonators embedded within a host plate, each incorporating a single vibration absorber. These absorbers generate shear forces and efficiently capture vibration energy when excited resonantly. To validate the effectiveness of these negative stiffness composite plates, numerical experiments were conducted. The findings reveal that the damping of the absorber can significantly influence the frequency stopband created by the absorber’s resonance. Notably, damping has a minor but positive effect on broadening the stopband width and reducing the overall vibration response of the host plate. Furthermore, this study highlights the potential application of negative stiffness plates in mitigating elastic waves induced by earthquakes.
Accurate finite element models are essential for structural condition assessment, yet nominal material properties and idealized boundary conditions can produce systematic discrepancies between numerical and measured dynamics. This study proposes a physics-constrained sparse response-surface framework that combines Elastic Net basis selection, mechanically prescribed monotonicity, adaptive sample enrichment, and identifiability-aware uncertainty assessment within a transparent finite element model-updating procedure. A scaled steel truss was tested using millimeter-wave radar, and the first three vertical natural frequencies were identified by stochastic subspace identification. The resulting sparse polynomial surrogate was independently validated before bounded inversion and ANSYS back-substitution. The mean frequency error decreased from 5.55% to 0.82%. Jacobian and bootstrap analyses further showed that several combinations of material and boundary parameters can reproduce similar modal responses, so the updated parameters are best interpreted as a coupled equivalent calibration state rather than unique direct measurements. The proposed framework therefore improves physical consistency and computational efficiency while explicitly retaining the uncertainty associated with weakly identifiable parameter directions.
To address the limitations of traditional structural damage identification methods in terms of reliance on high-fidelity baseline models and sensitivity to minor damage, this paper proposes a novel physics-informed and data-driven approach based on the modal curvature variation coefficient. A damage-sensitive feature derived from the rate of change in the radius of curvature is established, providing a clear mathematical and physical interpretation to reduce model error interference and enhance local damage localization. The effectiveness of the proposed method is validated through a 1:20 scale model experiment of a main truss from a large stadium steel roof. A total of 33 experimental cases were designed, simulating single and multiple damage scenarios with varying severity levels (large, medium, and small). Multi-source monitoring techniques, including millimeter-wave radar interferometry, laser displacement sensors, high-resolution vision-based measurement, and accelerometers, were integrated. Modal parameters were extracted using the Stochastic Subspace Identification (SSI) method, and the finite element model was updated via a high-order response surface methodology. Numerical simulations and experimental results demonstrate that the proposed modal curvature variation coefficient is highly sensitive to local stiffness degradation and accurately locates both single and multiple large/medium damage regions. In cases involving multiple minor damages, the method effectively identifies the damaged areas but exhibits a risk of false positives in undamaged sections. The millimeter-wave radar measurements exhibit strong agreement with laser displacement data, confirming its viability for non-contact structural health monitoring. This research provides a robust technical framework and experimental foundation for condition assessment and early damage warning in large-scale engineering structures.
The prefabricated ECC/RC combined shear wall structure is an innovative prefabricated composite structure with better seismic performance by using ECC materials with better ductility in the main force and energy consumption regions of the prefabricated reinforced concrete (RC) shear wall structure. The key factors controlling the seismic energy dissipation capacity of this kind of structure are the use regions of ECC in composite coupling beams, use regions of ECC in shear walls, strength of ECC, stirrup ratio of coupling beams, strength of longitudinal reinforcement and so on. The parameters affecting seismic energy consumption are quantified by the finite element analysis method. By comparing and analyzing the load-displacement curves, hysteresis curves, energy dissipation capacity and stiffness degradation of the prefabricated ECC/RC combined shear wall structure specimen under these parameters, it is proposed that the best use regions of ECC is the cast-in-situ zone of the coupling beams with the scope of no more than400 mm at the shear walls’ bottom. The strength grade, the strength grade of longitudinal reinforcement, and the stirrup ratio of coupling beams are suggested design as E40, HRB400 and 0.5%, respectively.