This paper reports the facile synthesis of a novel architecture of Cu-MnS with PVP, where the high theoretical capacitance of MnS, low-cost, and high electrical conductivity of Cu, as well as appreciable surface area with high thermal and mechanical conductivity of PVP, as a single entity to fabricate a high-performance electrode for supercapacitor. Benefiting from their unique structures, the Cu-MnS with 2PVP electrode materials show a high specific capacitance of 833.58 F g−1 at 1 A g−1, reversibility for the charge/discharge process, which are much higher than that of the MnS-7 h, Cu-MnS, and Cu-MnS with 1 and 3PVP. The presence of an appropriate amount of PVP in Cu-MnS is favorable for improving the electrochemical performance of the electrode and the existence of Cu was inclined to enhance the electrical conductivity. The Cu-MnS with 2PVP electrode is a good reference for researchers to design and fabricate new electrode materials with enhanced capacitive performance.
A cost-effective and uniform crystal with different structures was fabricated using a facile chemical bath deposition technique for electrochemical supercapacitor (SC) applications. In this study, CuS, PbS, and CuS@PbS composite electrodes were fabricated for SCs. The morphology and structure of the electrodes were analyzed by field emission–scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The CuS@PbS composite electrode delivered outstanding electrochemical performance in SCs with a high specific capacitance of 1004.42 F g−1 at a current density of 2.85 A g−1, good cycling stability (only 2.9% loss after 3000 cycles at 2.85 A g−1), higher energy density of 33.89 Wh kg−1 at a power density of 714.28 W kg−1, and an excellent rate capability compared to other electrodes. These results show that the CuS@PbS composite can be used to improve the surface morphology and is a promising positive electrode material for SC applications.