This paper reports the facile synthesis of a novel architecture of Cu-MnS with PVP, where the high theoretical capacitance of MnS, low-cost, and high electrical conductivity of Cu, as well as appreciable surface area with high thermal and mechanical conductivity of PVP, as a single entity to fabricate a high-performance electrode for supercapacitor. Benefiting from their unique structures, the Cu-MnS with 2PVP electrode materials show a high specific capacitance of 833.58 F g−1 at 1 A g−1, reversibility for the charge/discharge process, which are much higher than that of the MnS-7 h, Cu-MnS, and Cu-MnS with 1 and 3PVP. The presence of an appropriate amount of PVP in Cu-MnS is favorable for improving the electrochemical performance of the electrode and the existence of Cu was inclined to enhance the electrical conductivity. The Cu-MnS with 2PVP electrode is a good reference for researchers to design and fabricate new electrode materials with enhanced capacitive performance.
High-power plasma power supply is very useful for many industrial and medical applications. Plasma is generated artificially in the laboratory or industry by applying the electric or magnetic field. In this manuscript, we presented the simple 4T analog MOS control high voltage high frequency inverter circuit as a plasma power supply using modulation index technique. The presented plasma power supply operated at 25 kHz frequency and 10 kV peak to peak voltage. It generates a 0 V to 10 kV controllable electric field. The generated electric field is applied and produces plasma, which can be used for many industrial applications. A 10 kV to 5 kW plasma power supply has been practically developed based on the proposed topology and experimentally tested and, additionally, excellent output power conversion efficiency is achieved. From these results, the 4T analog MOS control high voltage high frequency (HVHF) plasma switching power supply is verified.
This paper presents an electrode with a core/shell geometry and a unique four-layered porous wrinkled surface for pseudocapacitive supercapacitor applications. To design the electrode, Ni foam was used as a substrate, where the harmonious features of four constituents, ZnO (Z), NiS (N), PEDOT:PSS (P), and MnO2 (M) improved the supercapacitor electrochemical performance by mitigating the drawbacks of each other component. Cyclic voltammetry and galvanostatic charge discharge measurements confirmed that the ZNPM hybrid electrode exhibited excellent capacitive properties in 2 M KOH compared to the ZNP, ZN, and solely Z electrodes. The ZNPM electrode showed superior electrochemical capacitive performance and improved electrical conductivity with a high specific capacitance of 2072.52 F g−1 at 5 mA, and a high energy density of 31 Wh kg−1 at a power density of 107 W kg−1. Overall, ZNPM is a promising combination electrode material that can be used in supercapacitors and other electrochemical energy conversion/storage devices.
With the advent of new technologies and an alarming increase in the world’s population, there has been a rapid increase in energy consumption. Consequently, this has resulted in a surge in developing sources that generate electricity and concurrently escalating global warming levels. Owing to their contributions in vast applications, dependence on renewable energy is a reliable option. However, it is known that a complete and efficient utilization of the incoming solar radiation is not feasible, taking into account the various losses associated. Our proposal addresses concerns resulting in the efficient utilization of solar energy based on optimal cost analysis by the mathematical procedure. This methodology when used along with a battery-based photovoltaic (PV) system effectively reduces the amount of electricity imported from the grid. The implementation of this method scales down the monthly electricity consumption by 67.1%. Our findings were established considering South Korea’s residential electricity tariff system. Our system works based on a principle where the batteries are charged with solar PV during off-peak hours and discharged during peak hours. The state of charge of the battery could be monitored using a web server. In situations, wherein the load demand cannot be sustained by the batteries, grid power can be utilized during peak hours. The sequence of these events can be implemented by a series of algorithms. Our proposed system also helps in achieving the goal-7 of the sustainable development goals (SDG) prescribed by the United Nations (UN), which is to boost the consumption of renewable energy which ultimately results in monetary savings to a large extent.