Renewable Energy Sources (RES) showed enormous growth in the last few years. In comparison with the other RES, solar power has become the most feasible source because of its unique properties such as clean, noiseless, eco-friendly nature, etc. During the extraction of electric power, the DC–DC converters were given the prominent interest because of their extensive use in various applications. Photovoltaic (PV) systems generally suffer from less energy conversion efficiency along with improper stability and intermittent properties. Hence, there is a necessity of the Maximum power point tracking (MPPT) algorithm to ensure the maximum power available that can be harnessed from the solar PV. In this paper, the most important features of the DC/DC converters along with the MPPT techniques are reviewed and analyzed. A detailed comprehensive analysis is made on different converter topologies of both non-isolated and isolated DC/DC converters. Then, the modulation strategies, comparative performance evaluation are addressed systematically. At the end, recent advances and future trends are described briefly and considered for the next-generation converter’s design and applications. This review work will provide a useful structure and reference point on the DC/DC converters for researchers and designers working in the field of solar PV applications.

In the context of constant growth in the utilization of the Li-ion batteries, there was a great surge in the quest for electrode materials and predominant usage that lead to the retiring of Li-ion batteries. This review focuses on the recent advances in the anode and cathode materials for the next-generation Li-ion batteries. To achieve higher power and energy demands of Li-ion batteries in future energy storage applications, the selection of the electrode materials plays a crucial role. The electrode materials, such as carbon-based, semiconductor/metal, metal oxides/nitrides/phosphides/sulfides, determine appreciable properties of Li-ion batteries such as greater specific surface area, a minimal distance of diffusion, and higher conductivity. Various classifications of the anode materials such as the intercalation/de- intercalation, alloy/de-alloy, and various conversion materials are illustrated lucidly. Further, the cathode materials, such as nickel-rich LiNi_xCo_yMn_zO₂ (NCM), were discussed. NCM members such as NCM 333, NCM 523 that enabled to advance for NCM622 and NCM81are reported. The nanostructured materials bridged the gap in the realization of next-generation Li-ion batteries. Li-ion batteries’ electrode nanostructure synthesis, performance, and reaction mechanisms were considered with great concern. The serious effects of Li-ion batteries disposal need to be cut significantly to reduce the detrimental effect on the environment. Hence, the recycling of spent Li-ion batteries has gained much attention in recent years. Various recycling techniques and their effect on the electroactive materials are illustrated. The key areas covered in this review are anode and cathode materials and recent advances along with their recycling techniques. In light of crucial points covered in this review, it constitutes a suitable reference for engineers, researchers, and designers in energy storage applications.

This paper introduces a novel approach for rapidly balancing lithium-ion batteries using a single DC–DC converter, enabling direct energy transfer between high- and low-voltage cells. Utilizing relays for cell pair selection ensures cost-effectiveness in the switch network. The control system integrates a battery-monitoring IC and an MCU to oversee cell voltage and ensure battery protection. A prototype circuit with twelve lithium-ion batteries demonstrates the method’s efficacy, achieving a remarkable balancing time of 48 min during charging with a maximum efficiency of 89.85%. Comparative analysis with other methods underscores the superior performance of the proposed balancing circuit in terms of balancing time and implementation cost. Furthermore, this paper delves into hardware aspects of battery management systems (BMSs) for electric vehicles and stationary applications. It offers an overview of prevailing concepts in state-of-the-art systems, aiding readers in assessing considerations essential for BMS design in various applications. The discussion includes examples of battery packs sourced from commercially available electric vehicles. Subsequently, the manuscript addresses implementation aspects concerning the measurement of critical physical variables such as voltage, current, and temperature, alongside balancing strategies.

This paper reports the facile synthesis of a novel architecture of Cu-MnS with PVP, where the high theoretical capacitance of MnS, low-cost, and high electrical conductivity of Cu, as well as appreciable surface area with high thermal and mechanical conductivity of PVP, as a single entity to fabricate a high-performance electrode for supercapacitor. Benefiting from their unique structures, the Cu-MnS with 2PVP electrode materials show a high specific capacitance of 833.58 F g⁻¹ at 1 A g⁻¹, reversibility for the charge/discharge process, which are much higher than that of the MnS-7 h, Cu-MnS, and Cu-MnS with 1 and 3PVP. The presence of an appropriate amount of PVP in Cu-MnS is favorable for improving the electrochemical performance of the electrode and the existence of Cu was inclined to enhance the electrical conductivity. The Cu-MnS with 2PVP electrode is a good reference for researchers to design and fabricate new electrode materials with enhanced capacitive performance.

The dual active bridge isolated bidirectional DC-DC converter (DAB-IBDC) is one of the prime converters used in dual active bridge renewable energy storage system (RESS) applications, particularly where a high-power density is required. The digital DSP (Digital Signal Processer) control technique also provides intelligence to applications and achieves a super compact elegant system by reducing the complicated control hardware. All power converters, including the DAB-IBDC converter, often draw an inrush current, which is many times higher than their steady state current. The inrush current is the maximum current drawn by a converter for a very few milliseconds while being freshly energized. Although it appears for only a very few milliseconds, it can cause severe damage to the entire energy storage system, including the sources and loads. To save the RESS system from the starting inrush current and peak overshoot voltages, this paper proposes a five-phase digital soft-start control algorithm for a high-power DAB-IBDC converter that was implemented at a renewable energy storage system aimed at developing an intelligent self-powered energy zone. The proposed five phase digital soft-start algorithm can alone solve the startup transients without the use of any additional hardware. First, it prevents the output current and voltages from transients, such as the inrush current and peak overshoot voltages, by ensuring that the output current does not increase too rapidly while starting up. Second, it also eliminates the large backflow inrush current released by a partially discharged energy storage device at the starting period. Third, it helps achieve a simple super compact size DAB-IBDC converter with a simple elegant design by ensuring the control and soft-start in digital technology.

High-power plasma power supply is very useful for many industrial and medical applications. Plasma is generated artificially in the laboratory or industry by applying the electric or magnetic field. In this manuscript, we presented the simple 4T analog MOS control high voltage high frequency inverter circuit as a plasma power supply using modulation index technique. The presented plasma power supply operated at 25 kHz frequency and 10 kV peak to peak voltage. It generates a 0 V to 10 kV controllable electric field. The generated electric field is applied and produces plasma, which can be used for many industrial applications. A 10 kV to 5 kW plasma power supply has been practically developed based on the proposed topology and experimentally tested and, additionally, excellent output power conversion efficiency is achieved. From these results, the 4T analog MOS control high voltage high frequency (HVHF) plasma switching power supply is verified.