BioLPG is a partially renewable fuel that can be produced by different conversion routes, with vegetable oil hydrotreatment (HVO) being one of the most promising processes. This study uses the Life Cycle Assessment (LCA) approach to assess the environmental impacts associated with this processing. The analysis considered the conditions practiced in Brazil with soybean oil (SO) as raw material, different hydrogen sources, and raw materials’ feed rates in the reaction system. The model was based on secondary data collected for the 2020–2021 biennium, and the environmental impacts were determined for Global Warming Potential, Primary Energy Demand, Terrestrial Acidification, Fine Particulate Matter Formation, Terrestrial Ecotoxicity, and direct Land Use Change. The results show that the SO produced by soybeans grown in Paraná/BR and hydrotreated with H2 obtained by electrolysis ([SO/H2]mol/mol = 1:30) had the best environmental performance in four of the six impact categories analyzed. A complementary analysis also identified the best environmental performances for bioLPG obtained from blending SO from different sources to avoid supplier dependence. Even accumulating worse environmental performance than fossil LPG, renewable fuel has promising prospects for deployment in Brazil. Nevertheless, for this to occur, some actions must be implemented in its production cycle.
Despite the importance of inputs such as urea, ethanol, and acetic acid for the global production of food, energy, and chemical bases, manufacturing these substances depends on non-renewable resources, generating significant environmental impacts. One alternative to reducing these effects is to integrate production processes. This study compares the cumulative environmental performance of individual production routes for ethanol, urea, and acetic acid with that of an integrated complex designed based on Industrial Ecology precepts. Life Cycle Assessment was used as a metric for the impact categories of Global Warming Potential (GWP) and Primary Energy Demand (PED). The comparison occurred between the reference scenario, which considers individual processes, and six alternative integrated arrangements that vary in the treatment given to a stream concentrated in fuels generated in the Carbon Capture and Usage system that serves the processing of acetic acid. The study showed that process integration is recommended in terms of PED, whose contributions were reduced by 46–63% compared to stand-alone processes. The impacts of GWP are associated with treating the fuel stream. If it is treated as a co-product and environmental loads are allocated in terms of energy content, gains of up to 44% can be expected. On the other hand, if the stream is a waste, the complex’s GWP becomes more aggressive than the baseline scenario by 66%.