Despite the importance of inputs such as urea, ethanol, and acetic acid for the global production of food, energy, and chemical bases, manufacturing these substances depends on non-renewable resources, generating significant environmental impacts. One alternative to reducing these effects is to integrate production processes. This study compares the cumulative environmental performance of individual production routes for ethanol, urea, and acetic acid with that of an integrated complex designed based on Industrial Ecology precepts. Life Cycle Assessment was used as a metric for the impact categories of Global Warming Potential (GWP) and Primary Energy Demand (PED). The comparison occurred between the reference scenario, which considers individual processes, and six alternative integrated arrangements that vary in the treatment given to a stream concentrated in fuels generated in the Carbon Capture and Usage system that serves the processing of acetic acid. The study showed that process integration is recommended in terms of PED, whose contributions were reduced by 46–63% compared to stand-alone processes. The impacts of GWP are associated with treating the fuel stream. If it is treated as a co-product and environmental loads are allocated in terms of energy content, gains of up to 44% can be expected. On the other hand, if the stream is a waste, the complex’s GWP becomes more aggressive than the baseline scenario by 66%.
This study investigated the effects of partial and total substitutions of fossil polypropylene (PP) for recycled plastic cap equivalents in the manufacture of signage labels used by the telephone industry. Four alternative scenarios to using virgin PP were evaluated considering recycled material in flake and pellet forms based on environmental performance, degree of circularity, and technical behavior. The environmental analysis was performed by the life cycle assessment (LCA) technique, and for all impact categories evaluated, using recycled material to replace the virgin reduced adverse effects on the environment. The most significant results in this dimension, with gains of 81% in the Global Environmental Indicator, occurred when recycled PP flakes entirely replaced the fossil polymer. Once again, the highest values of the Materials Circularity Indicator (MCI) were achieved by scenarios with full recycled resin in processing the tags; however, this product must also be reused. The mechanical behavior of the tags measured technical performance, and in this case, the product made with virgin PP outperformed the recycled options except for elongation. An analysis that integrated the three dimensions into a single performance index pointed to the complete substitution of virgin material for recycled as the most balanced option.