The ageing of the population, and their increasing wish of living independently, are motivating the development of welfare and healthcare models. Existing approaches based on the direct heath-monitoring using body sensor networks (BSN) are precise and accurate. Nonetheless, their intrusiveness causes non-acceptance. New approaches seek the indirect monitoring through monitoring activities of daily living (ADLs), which proves to be a suitable solution. ADL monitoring systems use many heterogeneous sensors, are less intrusive, and are less expensive than BSN, however, the deployment and maintenance of wireless sensor networks (WSN) prevent them from a widespread acceptance. In this work, a novel technique to monitor the human activity, based on non-intrusive load monitoring (NILM), is presented. The proposal uses only smart meter data, which leads to minimum intrusiveness and a potential massive deployment at minimal cost. This could be the key to develop sustainable healthcare models for smart homes, capable of complying with the elderly people’ demands. This study also uses the Dempster-Shafer theory to provide a daily score of normality with regard to the regular behavior. This approach has been evaluated using real datasets and, additionally, a benchmarking against a Gaussian mixture model approach is presented.

Indoor positioning remains a challenge and, despite much research and development carried out in the last decade, there is still no standard as with the Global Navigation Satellite Systems (GNSS) outdoors. This paper presents an indoor positioning system called LOCATE-US with adjustable granularity for use with commercial mobile devices, such as smartphones or tablets. LOCATE-US is privacy-oriented and allows every device to compute its own position by fusing ultrasonic, inertial sensor measurements and map information. Ultrasonic Local Positioning Systems (U-LPS) based on encoded signals are placed in critical zones that require an accuracy below a few decimeters to correct the accumulated drift errors of the inertial measurements. These systems are well suited to work at room level as walls confine acoustic waves inside. To avoid audible artifacts, the U-LPS emission is set at 41.67 kHz, and an ultrasonic acquisition module with reduced dimensions is attached to the mobile device through the USB port to capture signals. Processing in the mobile device involves an improved Time Differences of Arrival (TDOA) estimation that is fused with the measurements from an external inertial sensor to obtain real-time location and trajectory display at a 10 Hz rate. Graph-matching has also been included, considering available prior knowledge about the navigation scenario. This kind of device is an adequate platform for Location-Based Services (LBS), enabling applications such as augmented reality, guiding applications, or people monitoring and assistance. The system architecture can easily incorporate new sensors in the future, such as UWB, RFiD or others.

The task of determining the physical coordinates of a target in indoor environments is still a key factor for many applications including people and robot navigation, user tracking, location-based advertising, augmented reality, gaming, emergency response or ambient assisted living environments. Among the different possibilities for indoor positioning, Acoustic Local Positioning Systems (ALPS) have the potential for centimeter level positioning accuracy with coverage distances up to tens of meters. In addition, acoustic transducers are small, low cost and reliable thanks to the room constrained propagation of these mechanical waves. Waveform design (coding and modulation) is usually incorporated into these systems to facilitate the detection of the transmitted signals at the receiver. The aperiodic correlation properties of the emitted signals have a large impact on how the ALPS cope with common impairment factors such as multipath propagation, multiple access interference, Doppler shifting, near-far effect or ambient noise. This work analyzes three of the most promising families of codes found in the literature for ALPS: Kasami codes, Zadoff-Chu and Orthogonal Chirp signals. The performance of these codes is evaluated in terms of time of arrival accuracy and characterized by means of model simulation under realistic conditions and by means of experimental tests in controlled environments. The results derived from this study can be of interest for other applications based on spreading sequences, such as underwater acoustic systems, ultrasonic imaging or even Code Division Multiple Access (CDMA) communications systems.

This paper presents a flexible deployment of ultrasonic position sensors and a novel positioning algorithm suitable for the navigation of mobile robots (MRs) in extensive indoor environments. Our proposal uses several independently-referenced local positioning systems (LPS), which means that each one of them operates within its own local reference system. In a typical layout, an indoor extensive area can be covered using just a reduced set of globally-referenced LPS (GRLPS), whose beacon positions are known to the global reference system, while the rest of the space can be covered using locally-referenced LPSs (LRLPS) that can be distributed arbitrarily. The number of LRLPS and their position can be also changed at any moment. The algorithm is composed of several Bayesian filters running in parallel, so that when an MR is under the GRLPS coverage area, its position is updated by a global filter, whereas when the MR is inside the LRLPS area, its position is updated using position increments within a local filter. The navigation algorithm has been tested by simulation and with actual data obtained using a real set of ultrasonic LPSs.

This paper proposes a multipath compensation algorithm (MCA) to enhance the performance of an ultrasonic local positioning system under adverse multipath conditions. The proposed algorithm is based on the accurate estimation of the environment impulse response from which the corresponding line of sight for each channel is obtained. Experimental results in two different environments and with different conditions have been conducted in order to evaluate the performance of this proposal. In both environments, results confirm the expected improvements, even under severe multipath conditions where positioning errors have been reduced from 44 to 9 cm for the 95% of the measurements.

In this paper, we report the design of an aperiodic remote formation controller applied to nonholonomic robots tracking nonlinear, trajectories using an external positioning sensor network. Our main objective is to reduce wireless communication with external sensors and robots while guaranteeing formation stability. Unlike most previous work in the field of aperiodic control, we design a self-triggered controller that only updates the control signal according to the variation of a Lyapunov function, without taking the measurement error into account. The controller is responsible for scheduling measurement requests to the sensor network and for computing and sending control signals to the robots. We design two triggering mechanisms: centralized, taking into account the formation state and decentralized, considering the individual state of each unit. We present a statistical analysis of simulation results, showing that our control solution significantly reduces the need for communication in comparison with periodic implementations, while preserving the desired tracking performance. To validate the proposal, we also perform experimental tests with robots remotely controlled by a mini PC through an IEEE 802.11g wireless network, in which robots pose is detected by a set of camera sensors connected to the same wireless network.