Colombia has great potential to produce clean energy through the use of residual biomass from the agricultural sector, such as residues obtained from the life cycle of rice production. This document presents a mixed approach methodology study to examine the combustion of rice husks as a possible energy alternative in the Tolima department of Colombia. First, the physicochemical characteristics of the rice husk were analyzed to characterize the raw material. Next, System Advisor Model (SAM) software was used to model a bioenergy plant to obtain biochar, bio-oil, and biogas from the combustion of rice husks and generate performance matrices, such as thermal efficiency, heat rate, and capacity factor. Then, the project was evaluated for financial feasibility using a mathematical model of net present value (NPV) with a planning horizon of 5 years. Finally, a subset of the local population was surveyed to assess perspectives on the project in the region. The results of the rice husk physicochemical analysis were the following: nitrogen content (0.74%), organic carbon (38.04%), silica (18.39%), humidity determination (7.68%), ash (19.4%), presence of carbonates (< 0.01%), and pH (6.41). These properties are adequate for the combustion process. The SAM simulation showed that the heat transferred in the boiler was 3180 kW, maintaining an efficiency between 50 and 52% throughout the 12 months of the year, meaning that the rice husk can generate electricity and thermal energy. The financial analysis showed that the internal rate of return (IRR) was 6% higher than the opportunity interest rate (OIR), demonstrating economic feasibility of the project. The design and creation of a rice husk processing plant is socially and environmentally viable and has the potential to contribute to the economic development of the Tolima community and reduce greenhouse gases. Likewise, this activity has the potential to promote energy security for consumers and environmental sustainability while at the same time being economically competitive.

In recent years, the determination of the antioxidant and antibacterial activity of essential oils in wild plants, such as Mexican oregano (Lippia graveolens Kunth), has become increasingly important. The objective was to compare the antioxidant and antibacterial activity of Mexican oregano essential oil obtained from plants occurring naturally in semiarid areas (Wild1 and Wild2), and those cultivated in the field (CField) and greenhouse (CGreenhouse) in northern Mexico. The Mexican oregano essential oil extraction was performed using the hydrodistillation method, the antioxidant activity was determined using the ABTS method, and the antibacterial activity was assessed through bioassays under the microwell method at nine different concentrations. The aim was to determine the diameter of the inhibition zone and, consequently, understand the sensitivity level for four bacterial species. The results revealed an antioxidant activity ranging from 90% to 94% at the sampling sites, with Wild1 standing out for having the highest average antioxidant activity values. Likewise, six out of the nine concentrations analyzed showed some degree of sensitivity for all the sampling sites. In this regard, the 25 µL mL⁻¹ concentration showed the highest diameter of inhibition zone values, highlighting the Wild2 site, which showed an average diameter greater than 30 mm for the four bacteria tested. Only in the case of S. typhi did the CGreenhouse site surpass the Wild2, with an average diameter of the inhibition zone of 36.7 mm. These findings contribute to the search for new antioxidant and antibacterial options, addressing the challenges that humanity faces in the quest for opportunities to increase life expectancy.

This review article characterizes the green inhibitors applied to control corrosion in metals and maintain the safety and profitability of the production process, since the corrosive phenomenon is insoluble, but can be mitigated with time. For this article, some case studies related to corrosion problems in metals are included, such as the accident in Aloha and the explosion in Guadalajara. Subsequently, the generalities of inhibitors for corrosion control are named, and the physisorption and chemisorption processes are compared. Then, inorganic, organic, synthetic, and green inhibitors are analyzed. The latter seek to replace the synthetic ones, for example, through aloe vera and other plant materials.

Este artículo presenta una revisión de las tecnologías usadas en Colombia y otros países para el tratamiento de aguas de la industria petrolera. El estudio parte desde la caracterización de la producción de crudo y la relación agua–crudo; luego se describen los efectos contaminantes del agua residual; asimismo, se cuantifican los destinos que se le dan a estas aguas en nuestro país. También se detallan algunos tratamientos superficiales convencionales y no convencionales. Es claro que, aunque se han hecho progresos significativos, hay que seguir investigando técnicas mucho más eficientes y económicas para eliminar ciertos contaminantes más recalcitrantes.

Agriculture is one of the economic activities with the most potential in Colombia, given its climatic and geographical conditions. Bean cultivation is classified as climbing, which grows in a branched way, and bushy, whose growth occurs up to 70 cm. The objective of this research was to study zinc and iron sulfates in different concentrations as fertilizers capable of increasing the nutritional value of kidney beans (Phaseolus vulgaris L.), whose strategy is known as biofortification, and thus determine the most effective sulfate. The methodology details the sulfate formulations, their preparation, the application of additives, sampling and quantification methods of total iron, total zinc, °Brix, carotenoids, chlorophylls a, b, and antioxidant capacity using the DPPH (2,2-diphenyl-1-picrylhydrazyl) method in leaves and pods. As for the results, it was found that biofortification with iron sulfate and zinc sulfate is a strategy that favors the country’s economy and human health, because it allows the increase of minerals, antioxidant capacity and total soluble solids.

In the oil sector, various strategies are applied to mitigate harmful effects on the environment. These strategies include, among others, compensation plans, the measurement and control of the carbon footprint and/or water footprint, the recovery of waste from activities and processes, and Environmental Management Systems (EMS). An EMS provides a formal framework that enables more efficient work on environmental issues, thereby improving performance. It aims to raise awareness of the environmental impacts associated with the oil industry in different areas through the use of weighting matrices. Additionally, it seeks to conduct sustainable studies and optimize the direct activities involved in the exploitation of hydrocarbons as a natural resource. Factors considered in decision making include ensuring that the strategy does not compromise the well-being of future generations, has economic viability, and does not hinder any oil sector activities such as exploration, drilling, production, or processing of derivatives. The purpose of this is that it allows for the creation of decision matrices based on weighting methodologies that outline possible correlations between specific activities of the oil sector such as water use, effects on soils and landscapes, greenhouse gas emissions, solid waste, liquid effluents, hazardous waste, and toxic waste, among others. The decision matrices can also help elucidate the relationship of these activities with mitigation strategies to provide a decision-making tool for environmental management plans so that activities are implemented in a way that can mitigate impacts on water, soil, and air resources. The results of this study were classified using a traffic light matrix, based on the level of technical congruence, using an optimal (green), regular (yellow), medium (orange), and at-risk (red) scale. The environmental impact of “alteration of the geoform of the land” was positioned in the at-risk category due to its assessment by experts in relation to the activity of “land adaptation”. In the medium category, a total of 23 impacts were identified, while 10 impacts fell into the regular category. These results were evaluated in the context of the environmental, social, and economic sustainability of the oil industry.