Asphaltene precipitation/deposition is considered a problem of formation damage, which can reduce the oil recovery factor. In addition, asphaltenes can be deposited in pipelines and surface installations, causing serious complications in guaranteeing runoff, decreasing the production of oil wells. The precipitation of asphaltenes can be minimized by reducing the oil production flowrate or by using chemical inhibitors. Analyzing the stability and precipitation trend of asphaltenes in petroleum is vital for the guarantee of flow. For this purpose, several experimental and numerical methods have been proposed. Once the risk of precipitation is established, strategies can be formulated for the prevention and diagnosis of deposition problems in production or production training. The tests can be performed with dead oil, available in the wellhead, and help in understanding the behavior of the asphaltenes. This review aims to present (i) the problem related to the precipitation of asphaltenes; (ii) thermodynamic models of asphaltene precipitation; and (iii) asphaltene inhibition, control, and removal techniques using nanoparticles.

Agriculture is one of the economic activities with the most potential in Colombia, given its climatic and geographical conditions. Bean cultivation is classified as climbing, which grows in a branched way, and bushy, whose growth occurs up to 70 cm. The objective of this research was to study zinc and iron sulfates in different concentrations as fertilizers capable of increasing the nutritional value of kidney beans (Phaseolus vulgaris L.), whose strategy is known as biofortification, and thus determine the most effective sulfate. The methodology details the sulfate formulations, their preparation, the application of additives, sampling and quantification methods of total iron, total zinc, °Brix, carotenoids, chlorophylls a, b, and antioxidant capacity using the DPPH (2,2-diphenyl-1-picrylhydrazyl) method in leaves and pods. As for the results, it was found that biofortification with iron sulfate and zinc sulfate is a strategy that favors the country’s economy and human health, because it allows the increase of minerals, antioxidant capacity and total soluble solids.

In the oil sector, various strategies are applied to mitigate harmful effects on the environment. These strategies include, among others, compensation plans, the measurement and control of the carbon footprint and/or water footprint, the recovery of waste from activities and processes, and Environmental Management Systems (EMS). An EMS provides a formal framework that enables more efficient work on environmental issues, thereby improving performance. It aims to raise awareness of the environmental impacts associated with the oil industry in different areas through the use of weighting matrices. Additionally, it seeks to conduct sustainable studies and optimize the direct activities involved in the exploitation of hydrocarbons as a natural resource. Factors considered in decision making include ensuring that the strategy does not compromise the well-being of future generations, has economic viability, and does not hinder any oil sector activities such as exploration, drilling, production, or processing of derivatives. The purpose of this is that it allows for the creation of decision matrices based on weighting methodologies that outline possible correlations between specific activities of the oil sector such as water use, effects on soils and landscapes, greenhouse gas emissions, solid waste, liquid effluents, hazardous waste, and toxic waste, among others. The decision matrices can also help elucidate the relationship of these activities with mitigation strategies to provide a decision-making tool for environmental management plans so that activities are implemented in a way that can mitigate impacts on water, soil, and air resources. The results of this study were classified using a traffic light matrix, based on the level of technical congruence, using an optimal (green), regular (yellow), medium (orange), and at-risk (red) scale. The environmental impact of “alteration of the geoform of the land” was positioned in the at-risk category due to its assessment by experts in relation to the activity of “land adaptation”. In the medium category, a total of 23 impacts were identified, while 10 impacts fell into the regular category. These results were evaluated in the context of the environmental, social, and economic sustainability of the oil industry.

This study presents the analysis of the exergy load distribution in a separation process by extractive distillation for ethanol dehydration. The methodology carried out is divided into three parts: the calculation of the flow exergy considering the physical and chemical exergies of the distillation process; the calculation of the primary and transformed exergy contributions considering the consumed exergy; and finally, the overall process efficiency, which shows the real percentage of energy being used in the process. The simulation of an extractive distillation separation system is carried out using Aspen Plus^®, from Aspen Tech Version 9. In general, heat transfer processes (heating or cooling) are the ones that generate the greatest exegetic destruction, which is why they must be the operations that must be optimized. As a result of our case study, the local exergy efficiency of the extractive distillation column is 13.80%, which is the operation with the greatest energy loss, and the overall exergy efficiency of the separation system is 30.67%. Then, in order to increase exergy efficiency, a sensitivity analysis is performed with the variation of the azeotrope feed, number of stages, reflux ratio, and solvent feed variation on ethanol purity to reach an overall efficiency of 33.53%. The purity of ethanol is classified as higher than that of the specified, 99.65%.

This work presents the proposal design for the completion of a polymer flooding injector well with waterflood flow regulator valves (FRV) in a Colombian field, based on experimental evaluations at the laboratory, intending to reduce the mechanical degradation suffered by the polymer solution at the time of injection, which allows to maintain the design parameters of the improved recovery project and reach the expected recovery factor. An analysis of the parameters and variables that influence the mechanical degradation of the polymer solution during the injection process (polymer solution concentration and the diameters of the FRV) was carried out using one laboratory methodology based on the recommended practices for the evaluation of polymers used in enhanced oil recovery operations API RP63. This work focuses on the following highlights: Evaluation of a waterflood flow regulator valve through experimental tests for polymer flooding and the designing of an initial well completion strategy to minimize mechanical degradation. The proposed valve and diameter resulted in a reduction of only 15 percentage points in the mechanical degradation of the polymeric solution when compared to a commercial water valve.