The use of composite, in particular, multilayer materials, is one way to decrease the specific quantity of metal in an item and to increase its service characteristics. To develop methods for the...
1 September 2014 in Metal Science and Heat Treatment
Epoxy lacquer coatings based on the ED-20 epoxy-diane resin, filled with nanosized TiO2, SiO2 and ZnO oxides and applied on an aluminum-magnesium alloy base, are studied by instrumented indentation. The effect of the duration of loading and the duration of holding under a constant load of 1 N on Martens hardness and the normal elastic modulus, depending on the material of the epoxy lacquer filler, has been established.
The regularities of the effect of a complex stress state on the strength of an AlMg5/epoxy adhesive joint are experimentally studied at −50 and +23 °C in tension+shear and compression+shear tests with different normal-to-shear stress ratios. The tests use modified Arcan specimens and Brazil-nut-sandwich specimens, with the lateral faces of the adhesive layer having a shape of a mushroom-like “ridge” aimed at reducing stress concentration at the specimen edges. An original computational model of a selected microvolume including the interface together with the adjacent substrate and adhesive layers is used to process the experimental results. The attainment of the threshold value of strain energy density in the selected microvolume, W*, is used as the failure criterion. The effect of the hardener composition, the testing temperature, and the value of the phase angle β determining the proportion of normal and shear stresses at the adhesive interface on the threshold value W* is detected. W*(β) diagrams (fracture loci) are plotted and analytically described logarithmic functions. They can be used to make strength calculations for adhesive joints in structures and metal-polymer composites.