In this study, we systematically study the efficient production method and electrochemical characteristics of activated carbons (AC) derived from rice husk (RH) and walnut shell (WS). In particular, the effectiveness of physical activation using carbon dioxide (CO₂) was investigated and compared with the more common chemical activation method using potassium hydroxide (KOH). The results show that the KOH–activated samples have remarkable specific capacities, reaching 157.8 F g⁻¹ for RH and 152 F g⁻¹ for WS at 1 A g⁻¹. However, the rate capability of AC obtained via KOH decreases significantly as the scanning rate increases, retaining only 51.5% and 68% of their original capacities for RH–KOH and WS–KOH, respectively, at 20 A g^–1. In contrast, CO₂–activated samples show a superior rate performance with a capacity retention of 75.6% for WS and 80% for RH at the same current density. In addition, electrochemical impedance spectroscopy (EIS) analysis shows that AC obtained via CO₂ has a lower charge transfer resistance compared to its KOH counterparts. CO₂–activated RH and WS electrodes show Rct values of 0.1 Ω and 0.24 Ω, respectively, indicating improved ion transport kinetics and surface area utilization. These results highlight the importance of activation techniques in tailoring the electrochemical behavior of biomass–derived carbon. This study not only expands the understanding of the interaction between activation, morphology, and performance but also indicates the potential of CO₂ activation as an environmentally friendly and efficient alternative. As the field of sustainable energy storage advances, this work provides valuable guidance for the development of high–performance supercapacitor electrodes with less environmental impact.

One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions.

Gas sensors are essential for safety and quality of life, with broad applications in industry, healthcare, and environmental monitoring. As urbanization and industrial activities intensify, the need for advanced air quality monitoring becomes critical, driving the demand for more sensitive, selective, and reliable sensors. Recent advances in nanotechnology, particularly 1D nanostructures like nanofibers and nanowires, have garnered significant interest due to their high surface area and improved charge transfer properties. Electrospinning stands out as a promising technique for fabricating these nanomaterials, enabling precise control over their morphology and leading to sensors with exceptional attributes, including high sensitivity, rapid response, and excellent stability in harsh conditions. This review examines the current research on chemoresistive gas sensors based on 1D nanostructures produced by electrospinning. It focuses on how the morphology and composition of these nanomaterials influence key sensor characteristics—sensitivity, selectivity, and stability. The review highlights recent advancements in sensors incorporating metal oxides, carbon nanomaterials, and conducting polymers, along with their modifications to enhance performance. It also explores the use of fiber-based composite materials for detecting oxidizing, reducing, and volatile organic compounds. These composites leverage the properties of various materials to achieve high sensitivity and selectivity, allowing for the detection of a wide range of gases in diverse conditions. The review further addresses challenges in scaling up production and suggests future research directions to overcome technological limitations and improve sensor performance for both industrial and domestic air quality monitoring applications.

In this study, we present another approach to fabricating high-performance supercapacitor electrodes by combining activated carbon particles with carbon nanotubes (AC/CNT). We synthesized activated carbon from diverse biomass sources using a carbonization process and chemical activation with KOH. By incorporating carbon nanotubes, we significantly augmented the electrode’s surface area, resulting in exceptional ion transport and a substantial increase in specific capacitance. Our investigation reveals that the optimized composition, 85:10:5 of AC, CNT, and conductive additive, achieved outstanding specific capacitance values, notably 125.6 F g⁻¹ at 1 mV s⁻¹ and 118 F g⁻¹ at 1 A g⁻¹, along with a maximum energy density of 4 Wh kg⁻¹. Electrochemical impedance spectroscopy (EIS) further demonstrated the superior charge transfer capabilities of these electrodes, notably at a frequency range from 100 kHz to 10 mHz. Additionally, our research highlights the influence of different biomass precursors, such as apricot kernels, walnut shells, and rice husks, on the electrochemical behavior of these electrodes. Overall, this study provides valuable insights into the development of high-performance supercapacitors, emphasizing the potential of diverse biomass sources in optimizing electrode materials.

The increasing reliance on electronic technologies has elevated the urgency of effective electromagnetic interference (EMI) shielding materials. This review explores the development and potential of magnetite-incorporated one-dimensional (1D) carbon nanostructure hybrids, focusing on their unique properties and synthesis methods. By combining magnetite’s magnetic properties with the electrical conductivity and mechanical strength of carbon nanostructures such as carbon nanotubes (CNTs) and carbon fibers (CFs), these hybrids offer superior EMI shielding performance. Various synthesis techniques, including solvothermal synthesis, in situ growth, and electrostatic self-assembly, are discussed in detail, highlighting their impact on the structure and properties of the resulting composites. This review also addresses the challenges in achieving homogeneous dispersion of nanofillers and the environmental and economic considerations of large-scale production. The hybrid materials’ multifunctionality, including enhanced mechanical strength, thermal stability, and environmental resistance, underscores their suitability for advanced applications in aerospace, electronics, and environmental protection. Future research directions focus on optimizing synthesis processes and exploring new hybrid configurations to further improve electromagnetic properties and practical applicability.

The results of the synthesis of PAN(polyacrylonitrile)-magnetite composite fibers using the electrospinning method are presented. The electrospinning installation included a rotating drum collector for collecting fibers. Magnetite nanoparticles were synthesized using chemical condensation from an iron chloride solution. It was shown that homogeneous Fe₃O₄ magnetite nanoparticles with particle sizes of 6–16 nm could be synthesized using this method. Magnetite nanoparticles were investigated using X-ray diffraction analyses and transmission electron microscopy. Based on magnetite nanoparticles, composite PAN/magnetite fibers were obtained through electrospinning. The obtained composite fibers were investigated using scanning electron microscopy, X-ray diffraction analyses, and elemental analyses. It was shown that the magnetite nanoparticles were uniformly distributed on the surface of the fibers. A comparison of PAN fibers without any added magnetite to PAN/magnetite fibers showed that the addition of magnetite led to a decrease in the value of the fiber diameter at the same polymer concentration and under the same electrospinning process conditions.